Re: [gentoo-user-de] drucker-usb

[Jakob]

On 12/20/06, Sebastian Kürschner <selist@×××××.de> wrote:
> Hallo Bolug,
>
> > hmm, war auch nur so eine idee. was sagt den /var/log/ messages oder
> > cups_error_log
> > komisch das suse keine printers.conf verwendet.
>
> cups_error_log sagt folgendes (seltsamerweise gibt es da einträge aus der
> Zukunft, Da sind auch all die versuche mit suse Dateien dabei ):
> E [01/Jan/2007:01:14:08 +0100] Unable to open listen socket for
> address ::1:631 - Address family not supported by protocol.
> I [01/Jan/2007:01:14:08 +0100] Listening to /var/run/cups/cups.sock on fd 3...
> I [20/Dec/2006:21:13:23 +0100] Adding start banner page "none" to job 71.
> I [20/Dec/2006:21:13:23 +0100] Adding end banner page "none" to job 71.
> I [20/Dec/2006:21:13:23 +0100] Job 71 queued on "Canon_BJC-3000_USB_1"
> by "sebastian".
> I [20/Dec/2006:21:13:23 +0100] Started filter /usr/libexec/cups/filter/pstops
> (PID 6685) for job 71.
> I [20/Dec/2006:21:13:23 +0100] Started
> filter /usr/libexec/cups/filter/pstoraster (PID 6686) for job 71.
> I [20/Dec/2006:21:13:23 +0100] Started
> filter /usr/libexec/cups/filter/rastertoprinter (PID 6687) for job 71.
> I [20/Dec/2006:21:13:23 +0100] Started backend /usr/libexec/cups/backend/usb
> (PID 6688) for job 71.
> I [20/Dec/2006:21:13:38 +0100] Started "/usr/libexec/cups/daemon/cups-deviced"
> (pid=6694)
> I [20/Dec/2006:21:13:42 +0100] Started "/usr/libexec/cups/daemon/cups-deviced"
> (pid=6711)
> I [20/Dec/2006:21:13:48 +0100] Started "/usr/libexec/cups/daemon/cups-deviced"
> (pid=6725)
> I [20/Dec/2006:22:25:03 +0100] Scheduler shutting down normally.
> I [20/Dec/2006:22:25:03 +0100] Saving remote.cache...
> I [20/Dec/2006:22:25:04 +0100] Saving job cache
> file "/var/cache/cups/job.cache"...
> E [20/Dec/2006:22:25:04 +0100] Unknown directive RunAsUser on line 372.
> I [20/Dec/2006:22:25:04 +0100] Listening to 0.0.0.0:631 (IPv4)
> I [20/Dec/2006:22:25:04 +0100] Listening to :::631 (IPv6)
> W [20/Dec/2006:22:25:04 +0100] "AuthClass Group" is deprecated; consider
> using "Require @groupname" on line 842.
> W [20/Dec/2006:22:25:04 +0100] "AuthGroupName sys" directive is deprecated;
> consider using "Require @sys" on line 843.
> I [20/Dec/2006:22:25:04 +0100] Loaded configuration
> file "/etc/cups/cupsd.conf"
> W [20/Dec/2006:22:25:04 +0100] Repairing ownership of "/etc/cups"
> W [20/Dec/2006:22:25:04 +0100] Repairing ownership of "/etc/cups/ppd"
> W [20/Dec/2006:22:25:04 +0100] Repairing ownership of "/etc/cups/ssl"
> W [20/Dec/2006:22:25:04 +0100] Repairing access permissions of "/etc/cups/ssl"
> W [20/Dec/2006:22:25:04 +0100] Repairing ownership of "/etc/cups/cupsd.conf"
> W [20/Dec/2006:22:25:04 +0100] Repairing ownership of "/etc/cups/classes.conf"
> W [20/Dec/2006:22:25:04 +0100] Repairing access permissions
> of "/etc/cups/classes.conf"
> W [20/Dec/2006:22:25:04 +0100] Repairing ownership
> of "/etc/cups/printers.conf"
> W [20/Dec/2006:22:25:04 +0100] Repairing access permissions
> of "/etc/cups/printers.conf"
> I [20/Dec/2006:22:25:04 +0100] Using default TempDir of /var/spool/cups/tmp...
> I [20/Dec/2006:22:25:04 +0100] Cleaning out old temporary files
> in "/var/spool/cups/tmp"...
> I [20/Dec/2006:22:25:04 +0100] Configured for up to 100 clients.
> I [20/Dec/2006:22:25:04 +0100] Allowing up to 100 client connections per host.
> I [20/Dec/2006:22:25:04 +0100] Creating CUPS default administrative policy:
> I [20/Dec/2006:22:25:04 +0100] <Policy default>
> I [20/Dec/2006:22:25:04 +0100] <Limit Send-Document Send-URI Cancel-Job
> Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes
> Create-Job-Subscription Renew-Subscription Cancel-Subscription
> Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job
> Resume-Job CUPS-Move-Job CUPS-Authenticate-Job>
> I [20/Dec/2006:22:25:04 +0100] Order Deny,Allow
> I [20/Dec/2006:22:25:04 +0100] Require user @OWNER @SYSTEM
> I [20/Dec/2006:22:25:04 +0100] </Limit>
> I [20/Dec/2006:22:25:04 +0100] <Limit Pause-Printer Resume-Printer
> Set-Printer-Attributes Enable-Printer Disable-Printer
> Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
> Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
> Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer
> CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs
> CUPS-Reject-Jobs CUPS-Set-Default>
> I [20/Dec/2006:22:25:04 +0100] Order Deny,Allow
> I [20/Dec/2006:22:25:04 +0100] AuthType Basic
> I [20/Dec/2006:22:25:04 +0100] Require user @SYSTEM
> I [20/Dec/2006:22:25:04 +0100] </Limit>
> I [20/Dec/2006:22:25:04 +0100] <Limit All>
> I [20/Dec/2006:22:25:04 +0100] Order Deny,Allow
> I [20/Dec/2006:22:25:04 +0100] </Limit>
> I [20/Dec/2006:22:25:04 +0100] </Policy>
> I [20/Dec/2006:22:25:04 +0100] Full reload is required.
> I [20/Dec/2006:22:25:04 +0100] Loaded MIME database from '/etc/cups': 30
> types, 38 filters...
> I [20/Dec/2006:22:25:04 +0100] Loading job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:25:04 +0100] Full reload complete.
> I [20/Dec/2006:22:25:04 +0100] Listening to 0.0.0.0:631 on fd 2...
> E [20/Dec/2006:22:25:04 +0100] Unable to open listen socket for
> address :::631 - Address family not supported by protocol.
> I [20/Dec/2006:22:26:20 +0100] Scheduler shutting down normally.
> I [20/Dec/2006:22:26:20 +0100] Saving remote.cache...
> I [20/Dec/2006:22:26:20 +0100] Saving job cache
> file "/var/cache/cups/job.cache"...
> E [20/Dec/2006:22:26:21 +0100] Unknown directive RunAsUser on line 372.
> I [20/Dec/2006:22:26:21 +0100] Listening to 0.0.0.0:631 (IPv4)
> I [20/Dec/2006:22:26:21 +0100] Listening to :::631 (IPv6)
> W [20/Dec/2006:22:26:21 +0100] "AuthClass Group" is deprecated; consider
> using "Require @groupname" on line 842.
> W [20/Dec/2006:22:26:21 +0100] "AuthGroupName sys" directive is deprecated;
> consider using "Require @sys" on line 843.
> I [20/Dec/2006:22:26:21 +0100] Loaded configuration
> file "/etc/cups/cupsd.conf"
> I [20/Dec/2006:22:26:21 +0100] Using default TempDir of /var/spool/cups/tmp...
> I [20/Dec/2006:22:26:21 +0100] Cleaning out old temporary files
> in "/var/spool/cups/tmp"...
> I [20/Dec/2006:22:26:21 +0100] Configured for up to 100 clients.
> I [20/Dec/2006:22:26:21 +0100] Allowing up to 100 client connections per host.
> I [20/Dec/2006:22:26:21 +0100] Creating CUPS default administrative policy:
> I [20/Dec/2006:22:26:21 +0100] <Policy default>
> I [20/Dec/2006:22:26:21 +0100] <Limit Send-Document Send-URI Cancel-Job
> Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes
> Create-Job-Subscription Renew-Subscription Cancel-Subscription
> Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job
> Resume-Job CUPS-Move-Job CUPS-Authenticate-Job>
> I [20/Dec/2006:22:26:21 +0100] Order Deny,Allow
> I [20/Dec/2006:22:26:21 +0100] Require user @OWNER @SYSTEM
> I [20/Dec/2006:22:26:21 +0100] </Limit>
> I [20/Dec/2006:22:26:21 +0100] <Limit Pause-Printer Resume-Printer
> Set-Printer-Attributes Enable-Printer Disable-Printer
> Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
> Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
> Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer
> CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs
> CUPS-Reject-Jobs CUPS-Set-Default>
> I [20/Dec/2006:22:26:21 +0100] Order Deny,Allow
> I [20/Dec/2006:22:26:21 +0100] AuthType Basic
> I [20/Dec/2006:22:26:21 +0100] Require user @SYSTEM
> I [20/Dec/2006:22:26:21 +0100] </Limit>
> I [20/Dec/2006:22:26:21 +0100] <Limit All>
> I [20/Dec/2006:22:26:21 +0100] Order Deny,Allow
> I [20/Dec/2006:22:26:21 +0100] </Limit>
> I [20/Dec/2006:22:26:21 +0100] </Policy>
> I [20/Dec/2006:22:26:21 +0100] Full reload is required.
> I [20/Dec/2006:22:26:21 +0100] Loaded MIME database from '/etc/cups': 30
> types, 38 filters...
> I [20/Dec/2006:22:26:21 +0100] Loading job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:26:21 +0100] Full reload complete.
> I [20/Dec/2006:22:26:21 +0100] Listening to 0.0.0.0:631 on fd 2...
> E [20/Dec/2006:22:26:21 +0100] Unable to open listen socket for
> address :::631 - Address family not supported by protocol.
> I [20/Dec/2006:22:29:12 +0100] Scheduler shutting down normally.
> I [20/Dec/2006:22:29:12 +0100] Saving remote.cache...
> I [20/Dec/2006:22:29:12 +0100] Saving job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:29:12 +0100] Listening to 127.0.0.1:631 (IPv4)
> I [20/Dec/2006:22:29:12 +0100] Listening to ::1:631 (IPv6)
> I [20/Dec/2006:22:29:12 +0100] Listening to /var/run/cups/cups.sock (Domain)
> I [20/Dec/2006:22:29:12 +0100] Loaded configuration
> file "/etc/cups/cupsd.conf"
> W [20/Dec/2006:22:29:12 +0100] Repairing ownership of "/etc/cups"
> W [20/Dec/2006:22:29:12 +0100] Repairing ownership of "/etc/cups/ppd"
> W [20/Dec/2006:22:29:12 +0100] Repairing ownership of "/etc/cups/ssl"
> W [20/Dec/2006:22:29:12 +0100] Repairing ownership
> of "/etc/cups/printers.conf"
> W [20/Dec/2006:22:29:12 +0100] Repairing access permissions
> of "/etc/cups/printers.conf"
> I [20/Dec/2006:22:29:12 +0100] Using default TempDir of /var/spool/cups/tmp...
> I [20/Dec/2006:22:29:12 +0100] Cleaning out old temporary files
> in "/var/spool/cups/tmp"...
> I [20/Dec/2006:22:29:12 +0100] Configured for up to 100 clients.
> I [20/Dec/2006:22:29:12 +0100] Allowing up to 100 client connections per host.
> I [20/Dec/2006:22:29:12 +0100] Using policy "default" as the default!
> I [20/Dec/2006:22:29:12 +0100] Full reload is required.
> I [20/Dec/2006:22:29:12 +0100] Loaded MIME database from '/etc/cups': 34
> types, 39 filters...
> I [20/Dec/2006:22:29:12 +0100] Loading job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:29:12 +0100] Full reload complete.
> I [20/Dec/2006:22:29:12 +0100] Listening to 127.0.0.1:631 on fd 2...
> E [20/Dec/2006:22:29:12 +0100] Unable to open listen socket for
> address ::1:631 - Address family not supported by protocol.
> I [20/Dec/2006:22:29:12 +0100] Listening to /var/run/cups/cups.sock on fd 3...
> I [20/Dec/2006:22:30:20 +0100] Scheduler shutting down normally.
> I [20/Dec/2006:22:30:20 +0100] Saving remote.cache...
> I [20/Dec/2006:22:30:20 +0100] Saving job cache
> file "/var/cache/cups/job.cache"...
> E [20/Dec/2006:22:30:20 +0100] Unknown directive RunAsUser on line 372.
> I [20/Dec/2006:22:30:20 +0100] Listening to 0.0.0.0:631 (IPv4)
> I [20/Dec/2006:22:30:20 +0100] Listening to :::631 (IPv6)
> W [20/Dec/2006:22:30:20 +0100] "AuthClass Group" is deprecated; consider
> using "Require @groupname" on line 842.
> W [20/Dec/2006:22:30:20 +0100] "AuthGroupName sys" directive is deprecated;
> consider using "Require @sys" on line 843.
> I [20/Dec/2006:22:30:20 +0100] Loaded configuration
> file "/etc/cups/cupsd.conf"
> W [20/Dec/2006:22:30:20 +0100] Repairing ownership of "/etc/cups/cupsd.conf"
> I [20/Dec/2006:22:30:20 +0100] Using default TempDir of /var/spool/cups/tmp...
> I [20/Dec/2006:22:30:20 +0100] Cleaning out old temporary files
> in "/var/spool/cups/tmp"...
> I [20/Dec/2006:22:30:20 +0100] Configured for up to 100 clients.
> I [20/Dec/2006:22:30:20 +0100] Allowing up to 100 client connections per host.
> I [20/Dec/2006:22:30:20 +0100] Creating CUPS default administrative policy:
> I [20/Dec/2006:22:30:20 +0100] <Policy default>
> I [20/Dec/2006:22:30:20 +0100] <Limit Send-Document Send-URI Cancel-Job
> Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes
> Create-Job-Subscription Renew-Subscription Cancel-Subscription
> Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job
> Resume-Job CUPS-Move-Job CUPS-Authenticate-Job>
> I [20/Dec/2006:22:30:20 +0100] Order Deny,Allow
> I [20/Dec/2006:22:30:20 +0100] Require user @OWNER @SYSTEM
> I [20/Dec/2006:22:30:20 +0100] </Limit>
> I [20/Dec/2006:22:30:20 +0100] <Limit Pause-Printer Resume-Printer
> Set-Printer-Attributes Enable-Printer Disable-Printer
> Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs
> Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer
> Startup-Printer Promote-Job Schedule-Job-After CUPS-Add-Printer
> CUPS-Delete-Printer CUPS-Add-Class CUPS-Delete-Class CUPS-Accept-Jobs
> CUPS-Reject-Jobs CUPS-Set-Default>
> I [20/Dec/2006:22:30:20 +0100] Order Deny,Allow
> I [20/Dec/2006:22:30:20 +0100] AuthType Basic
> I [20/Dec/2006:22:30:20 +0100] Require user @SYSTEM
> I [20/Dec/2006:22:30:20 +0100] </Limit>
> I [20/Dec/2006:22:30:20 +0100] <Limit All>
> I [20/Dec/2006:22:30:20 +0100] Order Deny,Allow
> I [20/Dec/2006:22:30:20 +0100] </Limit>
> I [20/Dec/2006:22:30:20 +0100] </Policy>
> I [20/Dec/2006:22:30:20 +0100] Full reload is required.
> I [20/Dec/2006:22:30:20 +0100] Loaded MIME database from '/etc/cups': 34
> types, 39 filters...
> I [20/Dec/2006:22:30:20 +0100] Loading job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:30:20 +0100] Full reload complete.
> I [20/Dec/2006:22:30:20 +0100] Listening to 0.0.0.0:631 on fd 2...
> E [20/Dec/2006:22:30:20 +0100] Unable to open listen socket for
> address :::631 - Address family not supported by protocol.
> I [20/Dec/2006:22:39:45 +0100] Scheduler shutting down normally.
> I [20/Dec/2006:22:39:45 +0100] Saving remote.cache...
> I [20/Dec/2006:22:39:45 +0100] Saving job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:39:45 +0100] Listening to 127.0.0.1:631 (IPv4)
> I [20/Dec/2006:22:39:45 +0100] Listening to ::1:631 (IPv6)
> I [20/Dec/2006:22:39:45 +0100] Listening to /var/run/cups/cups.sock (Domain)
> I [20/Dec/2006:22:39:45 +0100] Loaded configuration
> file "/etc/cups/cupsd.conf"
> I [20/Dec/2006:22:39:45 +0100] Using default TempDir of /var/spool/cups/tmp...
> I [20/Dec/2006:22:39:45 +0100] Cleaning out old temporary files
> in "/var/spool/cups/tmp"...
> I [20/Dec/2006:22:39:45 +0100] Configured for up to 100 clients.
> I [20/Dec/2006:22:39:45 +0100] Allowing up to 100 client connections per host.
> I [20/Dec/2006:22:39:45 +0100] Using policy "default" as the default!
> I [20/Dec/2006:22:39:45 +0100] Full reload is required.
> I [20/Dec/2006:22:39:45 +0100] Loaded MIME database from '/etc/cups': 34
> types, 39 filters...
> I [20/Dec/2006:22:39:46 +0100] Loading job cache
> file "/var/cache/cups/job.cache"...
> I [20/Dec/2006:22:39:46 +0100] Full reload complete.
> I [20/Dec/2006:22:39:46 +0100] Listening to 127.0.0.1:631 on fd 2...
> E [20/Dec/2006:22:39:46 +0100] Unable to open listen socket for
> address ::1:631 - Address family not supported by protocol.
> I [20/Dec/2006:22:39:46 +0100] Listening to /var/run/cups/cups.sock on fd 3...
>
>
> und jetzt noch /var/log/turboprint.log
> ERROR:
> inifile::open: could not open input file:
> /etc/turboprint/turboprint.cfg
> configfile_class::open_config_file: could not open file
> ERROR:
> printcap::create_spooldirs: no configurations available
> ERROR:
> printcap::insert_tp_printcap: no configurations available
> ERROR:
> spoolsystem::write_configs: no configurations available
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::write_configfile: can't write config file
> lpr -Ptp0 /tmp/tp27784_0.tmp
> lpr -Ptp0 /tmp/tp6391_0.tmp
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::write_configfile: can't write config file
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::write_configfile: can't write config file
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::write_configfile: can't write config file
> ERROR:
> printcap::write_configfile: can't write config file
> ERROR:
> printcap::write_configfile: can't write config file
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::write_configfile: can't write config file
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::create_dir: mkdir returned 2
> ERROR:
> printcap::create_file: fopen failed
> ERROR:
> printcap::write_configfile: can't write config file
> lpr -Ptp1440 /usr/share/turboprint/dump/testpage-a4.ps
>
> Eine datei /var/logmesages gibt es hier nicht.
>
> Gruß
> Sebastian
>
>
> --
> gentoo-user-de@g.o mailing list
>
>
Also für mich sieht das eher nach einem fehler von turboprint aus.
du könntest mal versuchen cups und die anderen druckersachen neu zu
emergen. dass hat bei mir mal wunder gewirkt. vieleicht gibt es auch
einen anderen treiber für deinen drucker als turboprint. foomatic?

-- 
gentoo-user-de@g.o mailing list