| 1 |
Guten Tag, |
| 2 |
seit Tagen fummele ich an meinem System herum, |
| 3 |
um meinen USB_Scanner "HP-ScanJet 8250" zum |
| 4 |
Laufen zu bekommen. Aber egal was ich probiert habe |
| 5 |
das Ergebnis ist leider immer das gleiche. :-( |
| 6 |
XSane sagt:"Keine Geräte erreichbar" |
| 7 |
|
| 8 |
sane-find-scanner -v liefert: |
| 9 |
This is sane-find-scanner from sane-backends 1.0.20 |
| 10 |
|
| 11 |
# sane-find-scanner will now attempt to detect your scanner. If the |
| 12 |
# result is different from what you expected, first make sure your |
| 13 |
# scanner is powered up and properly connected to your computer. |
| 14 |
|
| 15 |
searching for SCSI scanners: |
| 16 |
checking /dev/scanner... failed to open (Invalid argument) |
| 17 |
checking /dev/sg0... failed to open (Invalid argument) |
| 18 |
checking /dev/sg1... failed to open (Invalid argument) |
| 19 |
checking /dev/sg2... failed to open (Invalid argument) |
| 20 |
checking /dev/sg3... failed to open (Invalid argument) |
| 21 |
checking /dev/sg4... failed to open (Invalid argument) |
| 22 |
checking /dev/sg5... failed to open (Invalid argument) |
| 23 |
checking /dev/sg6... failed to open (Invalid argument) |
| 24 |
checking /dev/sg7... failed to open (Invalid argument) |
| 25 |
checking /dev/sg8... failed to open (Invalid argument) |
| 26 |
checking /dev/sg9... failed to open (Invalid argument) |
| 27 |
checking /dev/sga... failed to open (Invalid argument) |
| 28 |
checking /dev/sgb... failed to open (Invalid argument) |
| 29 |
checking /dev/sgc... failed to open (Invalid argument) |
| 30 |
checking /dev/sgd... failed to open (Invalid argument) |
| 31 |
checking /dev/sge... failed to open (Invalid argument) |
| 32 |
checking /dev/sgf... failed to open (Invalid argument) |
| 33 |
checking /dev/sgg... failed to open (Invalid argument) |
| 34 |
checking /dev/sgh... failed to open (Invalid argument) |
| 35 |
checking /dev/sgi... failed to open (Invalid argument) |
| 36 |
checking /dev/sgj... failed to open (Invalid argument) |
| 37 |
checking /dev/sgk... failed to open (Invalid argument) |
| 38 |
checking /dev/sgl... failed to open (Invalid argument) |
| 39 |
checking /dev/sgm... failed to open (Invalid argument) |
| 40 |
checking /dev/sgn... failed to open (Invalid argument) |
| 41 |
checking /dev/sgo... failed to open (Invalid argument) |
| 42 |
checking /dev/sgp... failed to open (Invalid argument) |
| 43 |
checking /dev/sgq... failed to open (Invalid argument) |
| 44 |
checking /dev/sgr... failed to open (Invalid argument) |
| 45 |
checking /dev/sgs... failed to open (Invalid argument) |
| 46 |
checking /dev/sgt... failed to open (Invalid argument) |
| 47 |
checking /dev/sgu... failed to open (Invalid argument) |
| 48 |
checking /dev/sgv... failed to open (Invalid argument) |
| 49 |
checking /dev/sgw... failed to open (Invalid argument) |
| 50 |
checking /dev/sgx... failed to open (Invalid argument) |
| 51 |
checking /dev/sgy... failed to open (Invalid argument) |
| 52 |
checking /dev/sgz... failed to open (Invalid argument) |
| 53 |
# No SCSI scanners found. If you expected something different, make |
| 54 |
sure that |
| 55 |
# you have loaded a kernel SCSI driver for your SCSI adapter. |
| 56 |
|
| 57 |
searching for USB scanners: |
| 58 |
checking /dev/usb/scanner... failed to open (Invalid argument) |
| 59 |
checking /dev/usb/scanner0... failed to open (Invalid argument) |
| 60 |
checking /dev/usb/scanner1... failed to open (Invalid argument) |
| 61 |
checking /dev/usb/scanner2... failed to open (Invalid argument) |
| 62 |
checking /dev/usb/scanner3... failed to open (Invalid argument) |
| 63 |
checking /dev/usb/scanner4... failed to open (Invalid argument) |
| 64 |
checking /dev/usb/scanner5... failed to open (Invalid argument) |
| 65 |
checking /dev/usb/scanner5... failed to open (Invalid argument) |
| 66 |
checking /dev/usb/scanner7... failed to open (Invalid argument) |
| 67 |
checking /dev/usb/scanner8... failed to open (Invalid argument) |
| 68 |
checking /dev/usb/scanner9... failed to open (Invalid argument) |
| 69 |
checking /dev/usb/scanner10... failed to open (Invalid argument) |
| 70 |
checking /dev/usb/scanner11... failed to open (Invalid argument) |
| 71 |
checking /dev/usb/scanner12... failed to open (Invalid argument) |
| 72 |
checking /dev/usb/scanner13... failed to open (Invalid argument) |
| 73 |
checking /dev/usb/scanner14... failed to open (Invalid argument) |
| 74 |
checking /dev/usb/scanner15... failed to open (Invalid argument) |
| 75 |
checking /dev/usbscanner... failed to open (Invalid argument) |
| 76 |
checking /dev/usbscanner0... failed to open (Invalid argument) |
| 77 |
checking /dev/usbscanner1... failed to open (Invalid argument) |
| 78 |
checking /dev/usbscanner2... failed to open (Invalid argument) |
| 79 |
checking /dev/usbscanner3... failed to open (Invalid argument) |
| 80 |
checking /dev/usbscanner4... failed to open (Invalid argument) |
| 81 |
checking /dev/usbscanner5... failed to open (Invalid argument) |
| 82 |
checking /dev/usbscanner6... failed to open (Invalid argument) |
| 83 |
checking /dev/usbscanner7... failed to open (Invalid argument) |
| 84 |
checking /dev/usbscanner8... failed to open (Invalid argument) |
| 85 |
checking /dev/usbscanner9... failed to open (Invalid argument) |
| 86 |
checking /dev/usbscanner10... failed to open (Invalid argument) |
| 87 |
checking /dev/usbscanner11... failed to open (Invalid argument) |
| 88 |
checking /dev/usbscanner12... failed to open (Invalid argument) |
| 89 |
checking /dev/usbscanner13... failed to open (Invalid argument) |
| 90 |
checking /dev/usbscanner14... failed to open (Invalid argument) |
| 91 |
checking /dev/usbscanner15... failed to open (Invalid argument) |
| 92 |
libusb not available |
| 93 |
# No USB scanners found. If you expected something different, |
| 94 |
# make sure that you have loaded a kernel driver for your USB |
| 95 |
# host controller and have setup |
| 96 |
# the USB system correctly. See man sane-usb for details. |
| 97 |
# SANE has been built without libusb support. This may be a reason |
| 98 |
# for not detecting USB scanners. Read README for more details. |
| 99 |
|
| 100 |
# Not checking for parallel port scanners. |
| 101 |
|
| 102 |
# Most Scanners connected to the parallel port or other |
| 103 |
# proprietary ports can't be detected by this program. |
| 104 |
done |
| 105 |
|
| 106 |
und scanimage -L kommt zu folgendem Ergebnis: |
| 107 |
|
| 108 |
No scanners were identified. If you were expecting something different, |
| 109 |
check that the scanner is plugged in, turned on and detected by the |
| 110 |
sane-find-scanner tool (if appropriate). Please read the documentation |
| 111 |
which came with this software (README, FAQ, manpages). |
| 112 |
|
| 113 |
So langsam bin ich mit meinem Latein am Ende. |
| 114 |
Vieleich hat ja hier jemand noch einen Tip für mich !? :-) |
| 115 |
|
| 116 |
mfg |
| 117 |
Kurt |
| 118 |
|
| 119 |
ps. Natürlich ist mir in der Ausgabe von sane-find-scaner |
| 120 |
das folgende aufgefalle: "libusb not available" |
| 121 |
aber das "usb-USE-Flag" ist gesetzt und libusb ist |
| 122 |
installiert. :-( |
Archives