Re: [gentoo-user-es] Problemas al quemar imagen CUE/BIN con CDRDAO y CDRECORD

[Germán Piqué]

instalando windows, me parece.

Linux solo soporta de forma nativa los estandards.

No se si hay forma directa.

La conversión es muy rapida. No es una molestia.

2007/2/7, Carlos Moyano Cubillos <cmcglnx@×××××.com>:
>
> Probando......
>
>
> Muchisimas gracias por responder tan pronto.
>
>
> Solo una consulta mas, como podre grabar estas imagenes bin/cue sin
> necesidad de convertirlas a iso???
>
>
> bueno, nuevamente gracias
>
> saludos a todos
>
>
>
> 2007/2/7, Germán Piqué <extremdur2@×××××.com>:
> > Cdrecord no te lo pilla pq no es un formato de iso estandard.
> >
> > conviertelas a iso:
> >
> > emerge bchunk
> >
> > bchunk videocd.bin videocd.cue videocd
> >
> > Y te creará el fichero videocd01.iso
> >
> > Tuestala y a disfrutarla.
> >
> > Salu2
> >
> > 2007/2/7, Carlos Moyano Cubillos <cmcglnx@×××××.com>:
> > >
> > > Hola amigos de la lista
> > >
> > > le escribo ya que nesecito su ayuda nuevamente.
> > >
> > > tengo ploblemas al quemar un imagen bin/cue de svcd creada con
> vcdxbuild,
> > >
> > > he probado con crrdao y cdrecord y ambos fallan en lo mismo me parece.
> > >
> > > aca esta la orden y la salida
> > >
> > > con cdrdao:
> > >
> > *************************************************************
> > >
> > > ~ $ cdrdao write --device /dev/cdrw  "videocd.cue"
> > >
> > > Cdrdao version 1.2.1 - (C) Andreas Mueller < andreas@×××××.de>
> > >   SCSI interface library - (C) Joerg Schilling
> > >   Paranoia DAE library - (C) Monty
> > >
> > > Check http://cdrdao.sourceforge.net/drives.html#dt for
> > current driver tables.
> > >
> > > Using libscg version 'schily-0.8'
> > >
> > > /dev/cdrw: HL-DT-ST RW/DVD GCC-4243N    Rev: 1.07
> > > Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
> > >
> > > Starting write at speed 24...
> > > Pausing 10 seconds - hit CTRL-C to abort.
> > > Process can be aborted with QUIT signal (usually CTRL-\).
> > > Turning BURN-Proof on
> > > Executing power calibration...
> > > Power calibration successful.
> > > ?: Success.  : scsi sendcmd: no error
> > > CDB:  2A 00 FF FF FF 6A 00 00 1A 00
> > > status: 0x2 (CHECK CONDITION)
> > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> > > Sense Key: 0x5 Illegal Request, Segment 0
> > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> > > Sense flags: Blk 0 (not valid)
> > > resid: 60736
> > > cmd finished after 0.001s timeout 180s
> > > ERROR: Write data failed.
> > > ERROR: Writing failed.
> > >
> > >
> > *************************************************************
> > >
> > > con cdrecord:
> > >
> > *************************************************************
> > >
> > > ~ $ cdrecord -v gracetime=2 dev=/dev/cdrw speed=24 -dao
> > > driveropts=burnfree cuefile=videocd.cue -eject
> > >
> > > Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C)
> > > 1995-2006 Jörg Schilling
> > > TOC Type: 1 = CD-ROM
> > > scsidev: '/dev/cdrw'
> > > devname: '/dev/cdrw'
> > > scsibus: -2 target: -2 lun: -2
> > > Warning: Open by 'devname' is unintentional and not supported.
> > > Linux sg driver version: 3.5.27
> > > Using libscg version 'schily-0.8'.
> > > Driveropts: 'burnfree'
> > > SCSI buffer size: 64512
> > > atapi: 1
> > > Device type    : Removable CD-ROM
> > > Version        : 0
> > > Response Format: 2
> > > Capabilities   :
> > > Vendor_info    : 'HL-DT-ST'
> > > Identifikation : 'RW/DVD GCC-4243N'
> > > Revision       : '1.07'
> > > Device seems to be: Generic mmc2 DVD-ROM.
> > > Current: CD-R
> > > Profile: DVD-ROM
> > > Profile: CD-ROM
> > > Profile: CD-R (current)
> > > Profile: CD-RW
> > > Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> > > Driver flags   : MMC-3 SWABAUDIO BURNFREE
> > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
> > RAW/R96R
> > > Drive buf size : 1601712 = 1564 KB
> > > FIFO size      : 4194304 = 4096 KB
> > > Track 01: data     1 MB
> > > Track 02: data   644 MB
> > > Total size:      645 MB (63:59.62) = 287972 sectors
> > > Lout start:      646 MB (64:01/47) = 287972 sectors
> > > Current Secsize: 2048
> > > ATIP info from disk:
> > >   Indicated writing power: 5
> > >   Is not unrestricted
> > >   Is not erasable
> > >   Disk sub type: Medium Type A, low Beta category (A-) (2)
> > >   ATIP start of lead in:  -11535 (97:28/15)
> > >   ATIP start of lead out: 359847 (79:59/72)
> > > Disk type:    Short strategy type (Phthalocyanine or similar)
> > > Manuf. index: 7
> > > Manufacturer: GIGASTORAGE CORPORATION
> > > Blocks total: 359847 Blocks current: 359847 Blocks remaining: 71875
> > > Starting to write CD/DVD at speed 24 in real SAO mode for single
> session.
> > > Last chance to quit, starting real write    0 seconds. Operation
> starts.
> > > Waiting for reader process to fill input buffer ... input buffer
> ready.
> > > BURN-Free is ON.
> > > Performing OPC...
> > > Sending CUE sheet...
> > > Writing pregap for track 1 at -150
> > > cdrecord: Success. write_g1: scsi sendcmd: no error
> > > CDB:  2A 00 FF FF FF 6A 00 00 1B 00
> > > status: 0x2 (CHECK CONDITION)
> > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> > > Sense Key: 0x5 Illegal Request, Segment 0
> > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> > > Sense flags: Blk 0 (not valid)
> > > resid: 63504
> > > cmd finished after 0.001s timeout 200s
> > > write track pad data: error after 0 bytes
> > > BFree: 1564 K BSize: 1564 K
> > > Starting new track at sector: 0
> > > Track 01:    0 of    1 MB written.cdrecord: Success. write_g1: scsi
> > > sendcmd: no error
> > > CDB:  2A 00 00 00 00 00 00 00 1B 00
> > > status: 0x2 (CHECK CONDITION)
> > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
> > > Sense Key: 0x5 Illegal Request, Segment 0
> > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> > > Sense flags: Blk 0 (not valid)
> > > resid: 63504
> > > cmd finished after 0.001s timeout 200s
> > >
> > > write track data: error after 0 bytes
> > > cdrecord: A write error occured.
> > > cdrecord: Please properly read the error message above.
> > > Writing  time:   10.168s
> > > Average write speed 766.4x.
> > > Fixating...
> > > Fixating time:    0.002s
> > > cdrecord: fifo had 64 puts and 1 gets.
> > > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
> > >
> > >
> > >
> > *************************************************************
> > >
> > >
> > >
> > > bueno eso es, no se como solucionarlo.
> > >
> > > nunca habia intentado quemar una imagen bin/cue, solo iso y  con estas
> > > nunca tuve problemas
> > >
> > >
> > > de antemano les agradesco su ayuda
> > >
> > >
> > > adios.
> > > --
> > > C.M.C.
> > > --
> > > gentoo-user-es@g.o mailing list
> > >
> > >
> >
> >
>
>
> --
> C.M.C.
> --
> gentoo-user-es@g.o mailing list
>
>