Gentoo Archives: gentoo-user-es

From: Carlos Moyano Cubillos <cmcglnx@×××××.com>
To: gentoo-user-es@l.g.o
Subject: Re: [gentoo-user-es] Problemas al quemar imagen CUE/BIN con CDRDAO y CDRECORD
Date: Wed, 07 Feb 2007 20:05:43
Message-Id: 4ee8ce190702071204wd97caddgae80490819c41b97@mail.gmail.com
In Reply to: Re: [gentoo-user-es] Problemas al quemar imagen CUE/BIN con CDRDAO y CDRECORD by "Germán Piqué"
1 Probando......
2
3
4 Muchisimas gracias por responder tan pronto.
5
6
7 Solo una consulta mas, como podre grabar estas imagenes bin/cue sin
8 necesidad de convertirlas a iso???
9
10
11 bueno, nuevamente gracias
12
13 saludos a todos
14
15
16
17 2007/2/7, Germán Piqué <extremdur2@×××××.com>:
18 > Cdrecord no te lo pilla pq no es un formato de iso estandard.
19 >
20 > conviertelas a iso:
21 >
22 > emerge bchunk
23 >
24 > bchunk videocd.bin videocd.cue videocd
25 >
26 > Y te creará el fichero videocd01.iso
27 >
28 > Tuestala y a disfrutarla.
29 >
30 > Salu2
31 >
32 > 2007/2/7, Carlos Moyano Cubillos <cmcglnx@×××××.com>:
33 > >
34 > > Hola amigos de la lista
35 > >
36 > > le escribo ya que nesecito su ayuda nuevamente.
37 > >
38 > > tengo ploblemas al quemar un imagen bin/cue de svcd creada con vcdxbuild,
39 > >
40 > > he probado con crrdao y cdrecord y ambos fallan en lo mismo me parece.
41 > >
42 > > aca esta la orden y la salida
43 > >
44 > > con cdrdao:
45 > >
46 > *************************************************************
47 > >
48 > > ~ $ cdrdao write --device /dev/cdrw "videocd.cue"
49 > >
50 > > Cdrdao version 1.2.1 - (C) Andreas Mueller < andreas@×××××.de>
51 > > SCSI interface library - (C) Joerg Schilling
52 > > Paranoia DAE library - (C) Monty
53 > >
54 > > Check http://cdrdao.sourceforge.net/drives.html#dt for
55 > current driver tables.
56 > >
57 > > Using libscg version 'schily-0.8'
58 > >
59 > > /dev/cdrw: HL-DT-ST RW/DVD GCC-4243N Rev: 1.07
60 > > Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)
61 > >
62 > > Starting write at speed 24...
63 > > Pausing 10 seconds - hit CTRL-C to abort.
64 > > Process can be aborted with QUIT signal (usually CTRL-\).
65 > > Turning BURN-Proof on
66 > > Executing power calibration...
67 > > Power calibration successful.
68 > > ?: Success. : scsi sendcmd: no error
69 > > CDB: 2A 00 FF FF FF 6A 00 00 1A 00
70 > > status: 0x2 (CHECK CONDITION)
71 > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
72 > > Sense Key: 0x5 Illegal Request, Segment 0
73 > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
74 > > Sense flags: Blk 0 (not valid)
75 > > resid: 60736
76 > > cmd finished after 0.001s timeout 180s
77 > > ERROR: Write data failed.
78 > > ERROR: Writing failed.
79 > >
80 > >
81 > *************************************************************
82 > >
83 > > con cdrecord:
84 > >
85 > *************************************************************
86 > >
87 > > ~ $ cdrecord -v gracetime=2 dev=/dev/cdrw speed=24 -dao
88 > > driveropts=burnfree cuefile=videocd.cue -eject
89 > >
90 > > Cdrecord-ProDVD-Clone 2.01.01a10 (i686-pc-linux-gnu) Copyright (C)
91 > > 1995-2006 Jörg Schilling
92 > > TOC Type: 1 = CD-ROM
93 > > scsidev: '/dev/cdrw'
94 > > devname: '/dev/cdrw'
95 > > scsibus: -2 target: -2 lun: -2
96 > > Warning: Open by 'devname' is unintentional and not supported.
97 > > Linux sg driver version: 3.5.27
98 > > Using libscg version 'schily-0.8'.
99 > > Driveropts: 'burnfree'
100 > > SCSI buffer size: 64512
101 > > atapi: 1
102 > > Device type : Removable CD-ROM
103 > > Version : 0
104 > > Response Format: 2
105 > > Capabilities :
106 > > Vendor_info : 'HL-DT-ST'
107 > > Identifikation : 'RW/DVD GCC-4243N'
108 > > Revision : '1.07'
109 > > Device seems to be: Generic mmc2 DVD-ROM.
110 > > Current: CD-R
111 > > Profile: DVD-ROM
112 > > Profile: CD-ROM
113 > > Profile: CD-R (current)
114 > > Profile: CD-RW
115 > > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
116 > > Driver flags : MMC-3 SWABAUDIO BURNFREE
117 > > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
118 > RAW/R96R
119 > > Drive buf size : 1601712 = 1564 KB
120 > > FIFO size : 4194304 = 4096 KB
121 > > Track 01: data 1 MB
122 > > Track 02: data 644 MB
123 > > Total size: 645 MB (63:59.62) = 287972 sectors
124 > > Lout start: 646 MB (64:01/47) = 287972 sectors
125 > > Current Secsize: 2048
126 > > ATIP info from disk:
127 > > Indicated writing power: 5
128 > > Is not unrestricted
129 > > Is not erasable
130 > > Disk sub type: Medium Type A, low Beta category (A-) (2)
131 > > ATIP start of lead in: -11535 (97:28/15)
132 > > ATIP start of lead out: 359847 (79:59/72)
133 > > Disk type: Short strategy type (Phthalocyanine or similar)
134 > > Manuf. index: 7
135 > > Manufacturer: GIGASTORAGE CORPORATION
136 > > Blocks total: 359847 Blocks current: 359847 Blocks remaining: 71875
137 > > Starting to write CD/DVD at speed 24 in real SAO mode for single session.
138 > > Last chance to quit, starting real write 0 seconds. Operation starts.
139 > > Waiting for reader process to fill input buffer ... input buffer ready.
140 > > BURN-Free is ON.
141 > > Performing OPC...
142 > > Sending CUE sheet...
143 > > Writing pregap for track 1 at -150
144 > > cdrecord: Success. write_g1: scsi sendcmd: no error
145 > > CDB: 2A 00 FF FF FF 6A 00 00 1B 00
146 > > status: 0x2 (CHECK CONDITION)
147 > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
148 > > Sense Key: 0x5 Illegal Request, Segment 0
149 > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
150 > > Sense flags: Blk 0 (not valid)
151 > > resid: 63504
152 > > cmd finished after 0.001s timeout 200s
153 > > write track pad data: error after 0 bytes
154 > > BFree: 1564 K BSize: 1564 K
155 > > Starting new track at sector: 0
156 > > Track 01: 0 of 1 MB written.cdrecord: Success. write_g1: scsi
157 > > sendcmd: no error
158 > > CDB: 2A 00 00 00 00 00 00 00 1B 00
159 > > status: 0x2 (CHECK CONDITION)
160 > > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
161 > > Sense Key: 0x5 Illegal Request, Segment 0
162 > > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
163 > > Sense flags: Blk 0 (not valid)
164 > > resid: 63504
165 > > cmd finished after 0.001s timeout 200s
166 > >
167 > > write track data: error after 0 bytes
168 > > cdrecord: A write error occured.
169 > > cdrecord: Please properly read the error message above.
170 > > Writing time: 10.168s
171 > > Average write speed 766.4x.
172 > > Fixating...
173 > > Fixating time: 0.002s
174 > > cdrecord: fifo had 64 puts and 1 gets.
175 > > cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
176 > >
177 > >
178 > >
179 > *************************************************************
180 > >
181 > >
182 > >
183 > > bueno eso es, no se como solucionarlo.
184 > >
185 > > nunca habia intentado quemar una imagen bin/cue, solo iso y con estas
186 > > nunca tuve problemas
187 > >
188 > >
189 > > de antemano les agradesco su ayuda
190 > >
191 > >
192 > > adios.
193 > > --
194 > > C.M.C.
195 > > --
196 > > gentoo-user-es@g.o mailing list
197 > >
198 > >
199 >
200 >
201
202
203 --
204 C.M.C.
205 --
206 gentoo-user-es@g.o mailing list

Replies

Subject Author
Re: [gentoo-user-es] Problemas al quemar imagen CUE/BIN con CDRDAO y CDRECORD "Germán Piqué" <extremdur2@×××××.com>
Re: [gentoo-user-es] Problemas al quemar imagen CUE/BIN con CDRDAO y CDRECORD Santi Regueiro <santiregueiro@×××××.com>