1 |
On Thu, Nov 19, 2009 at 12:33:40PM +0100, Joerg Schilling wrote: |
2 |
> José Romildo Malaquias <j.romildo@×××××.com> wrote: |
3 |
> |
4 |
> > On Mon, Nov 16, 2009 at 03:43:12PM +0100, Joerg Schilling wrote: |
5 |
> > > José Romildo Malaquias <j.romildo@×××××.com> wrote: |
6 |
> > > |
7 |
> > > To find the reason for the following "Impossible" because |
8 |
> > > illegal error situation: |
9 |
> > > |
10 |
> > > Executing 'test unit ready' command on Bus 0 Target 6, Lun 0 timeout 40s |
11 |
> > > CDB: 00 00 00 00 00 00 |
12 |
> > > cdrecord: Input/output error. test unit ready: scsi sendcmd: fatal error |
13 |
> > > CDB: 00 00 00 00 00 00 |
14 |
> > > cmd finished after 0.000s timeout 40s |
15 |
> > > |
16 |
> > > |
17 |
> > > please run the command again and add debug=2 to the list of options. |
18 |
> > |
19 |
> > I am attaching the compressed output of the command: |
20 |
> > |
21 |
> > script -f -c "cdrecord -v debug=2 -sao -eject speed=8 fs=256m driveropts=burnfree /var/tmp/image.iso" cdrecord.log |
22 |
> |
23 |
> I cannot see any problem like the problem above. |
24 |
> |
25 |
> BTW: this may be caused by the fact that you did not simply add debug=2 |
26 |
> but at the same time removed -V. |
27 |
|
28 |
I have run the cdrecord command again, this time passing "-V" and "debug=2": |
29 |
|
30 |
$ script -f -c "cdrecord -vvv -V debug=2 -sao -eject speed=8 fs=256m driveropts=burnfree /var/tmp/image.iso" cdrecord.log |
31 |
|
32 |
and the compressed log is attached. |
33 |
|
34 |
I hope you can find anything useful to understand what is happening. |
35 |
|
36 |
Romildo |