Re: [gentoo-user] USB issue

[Franta]

Well some details. Here's the syslog for connecting the USB stick:

Feb  1 23:36:03 frankies usb 2-2: new full speed USB device using
ohci_hcd and address 2
Feb  1 23:36:03 frankies usb 2-2: not running at top speed; connect to a
high speed hub
Feb  1 23:36:03 frankies scsi0 : SCSI emulation for USB Mass Storage
devices
Feb  1 23:36:03 frankies usb-storage: device found at 2
Feb  1 23:36:03 frankies usb-storage: waiting for device to settle
before scanning
Feb  1 23:36:08 frankies Vendor: SanDisk   Model: Cruzer Micro      Rev:
2033
Feb  1 23:36:08 frankies Type:   Direct-Access                      ANSI
SCSI revision: 00
Feb  1 23:36:08 frankies SCSI device sda: 1024000 512-byte hdwr sectors
(524 MB)
Feb  1 23:36:08 frankies sda: Write Protect is off
Feb  1 23:36:08 frankies sda: Mode Sense: 02 00 00 00
Feb  1 23:36:08 frankies sda: assuming drive cache: write through
Feb  1 23:36:08 frankies SCSI device sda: 1024000 512-byte hdwr sectors
(524 MB)
Feb  1 23:36:08 frankies sda: Write Protect is off
Feb  1 23:36:08 frankies sda: Mode Sense: 02 00 00 00
Feb  1 23:36:08 frankies sda: assuming drive cache: write through
Feb  1 23:36:08 frankies sda: sda1
Feb  1 23:36:08 frankies Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
Feb  1 23:36:08 frankies usb-storage: device scan complete

Seems the hardware is OK.

But ...

frankies ~ # ls /dev/sd*
ls: /dev/sd*: No such file or directory
frankies ~ # 


On Wed, 2006-02-01 at 23:25 +0100, Franta wrote:
> Hi,
>
> that's me onesmore.
>
> Again the things changed were some emerge -u world.
>
> There are no USB disks coming up anymore. Dunno when this issue came up.
>
> I have a digital camera which I connected to my PC. It came up
> as /dev/sdaX and due to my USB settings as /dev/psmart.
>
> I have an USB key, which came up as /dev/sdaX and due to my USB settings
> as /dev/cruiser.
>
> I did'nt use any of them for half a year or so. Last week I tried to
> save some photos to th PC.
>
> There are the messages about connecting the USB device
> in /var/log/messages but no device is coming up.
>
> I've tried the same with the USB stick - the same story.
>
> Has something changed with coldplug/hotplug?
>
> Well, I could save the pictures from the camera or exchange data from
> the USB stick using Windows. Half a year ago this was possible with
> Gentoo too. I'd prefer this possibility ;)
>
> The only thing I've changed was some update world.
>
> THanks for any help
> Frank
>

-- 
gentoo-user@g.o mailing list