Re: [gentoo-user] nm-applet / vpnc / pptp / openvpn

[SpaceCake]

2009/11/18 Albert Hopkins <marduk@×××××××××××.org>

>
>
> > I've succesfullly installed Networkmanager and nm-applet with all the
> > plugins under Gnome / Kde-4-3 using the instructions can be found at
> > gentoo-wiki. It is working perfectly for wired and wireless LAN but
> > not for any VPN (this part of the applet is grey
> >
> > I was searching the archive and googled this thing but I cannot find a
> > solution, so I decided to ask you :)
> >
> > I suppose this is some problem with the dbus registration of the
> > plugins, but I'm not sure
>
> Why do you suppose that?  Have you looked at the logs.  In my experience
> the NetworkManager daemon spits out plenty of info by default in syslog.
> Have a look at those.  Paste those so we're not wandering around in the
> dark.
>
> -a
>
>
>
>
> Here is my log after starting Networkmanager. It is not talking about any
vpnc or openvpn stuff...do you have any idea?


/etc/init.d/NetworkManager start
 * Starting NetworkManager ...
Nov 19 12:18:48 brutal NetworkManager: <info>
starting...
[ ok ]
brutal ~ # Nov 19 12:18:49 brutal NetworkManager: nm_device_ethernet_new:
assertion `driver != NULL'
failed

Nov 19 12:18:49 brutal NetworkManager: nm_device_ethernet_new: assertion
`driver != NULL'
failed

Nov 19 12:18:49 brutal NetworkManager: <info>  (eth0): new Ethernet device
(driver:
'tg3')

Nov 19 12:18:49 brutal NetworkManager: <info>  (eth0): exported as
/org/freedesktop/Hal/devices/net_00_26_55_c9_e5_22

Nov 19 12:18:49 brutal NetworkManager: <info>  (wlan0): driver supports SSID
scans (scan_capa
0x01).

Nov 19 12:18:49 brutal NetworkManager: <info>  (wlan0): new 802.11 WiFi
device (driver:
'iwlagn')

Nov 19 12:18:49 brutal NetworkManager: <info>  (wlan0): exported as
/org/freedesktop/Hal/devices/net_00_1e_65_72_ab_2e

Nov 19 12:18:49 brutal NetworkManager: <info>  (ttyS0): ignoring due to lack
of mobile broadband
capabilties

Nov 19 12:18:53 brutal kernel: tg3 0000:85:00.0: wake-up capability disabled
by
ACPI

Nov 19 12:18:53 brutal kernel: tg3 0000:85:00.0: PME#
disabled

Nov 19 12:18:53 brutal NetworkManager: <info>  (eth0): device state change:
1 ->
2

Nov 19 12:18:53 brutal NetworkManager: <info>  (eth0): bringing up
device.

Nov 19 12:18:53 brutal kernel: tg3 0000:85:00.0: irq 32 for
MSI/MSI-X

Nov 19 12:18:53 brutal kernel: ADDRCONF(NETDEV_UP): eth0: link is not
ready

Nov 19 12:18:53 brutal NetworkManager: <info>  (eth0): preparing
device.

Nov 19 12:18:53 brutal NetworkManager: <info>  (eth0): deactivating device
(reason:
2).

Nov 19 12:18:53 brutal vmnetBridge: RTM_NEWLINK: name:eth0 index:3
flags:0x00001003

Nov 19 12:18:53 brutal vmnetBridge: Can't remove interface eth0 3 (does not
exist).

Nov 19 12:18:53 brutal NetworkManager: <info>  (wlan0): device state change:
1 ->
2

Nov 19 12:18:53 brutal NetworkManager: <info>  (wlan0): bringing up
device.

Nov 19 12:18:53 brutal vmnetBridge: RTM_NEWLINK: name:wlan0 index:5
flags:0x00001003

Nov 19 12:18:53 brutal vmnetBridge: Can't remove interface wlan0 5 (does not
exist).

Nov 19 12:18:53 brutal kernel: ADDRCONF(NETDEV_UP): wlan0: link is not
ready

Nov 19 12:18:53 brutal NetworkManager: <info>  (wlan0): preparing
device.

Nov 19 12:18:53 brutal NetworkManager: <info>  (wlan0): deactivating device
(reason:
2).

Nov 19 12:18:53 brutal NetworkManager: <info>  (wlan0): device state change:
2 ->
3

Nov 19 12:18:53 brutal vmnetBridge: RTM_NEWLINK: name:wlan0 index:5
flags:0x00001003

Nov 19 12:18:53 brutal vmnetBridge: Can't remove interface wlan0 5 (does not
exist).

Nov 19 12:18:53 brutal NetworkManager: <info>  (wlan0): supplicant interface
state:  starting ->
ready

Nov 19 12:18:54 brutal kernel: tg3: eth0: Link is up at 100 Mbps, full
duplex.

Nov 19 12:18:54 brutal kernel: tg3: eth0: Flow control is on for TX and on
for
RX.

Nov 19 12:18:54 brutal kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes
ready

Nov 19 12:18:54 brutal NetworkManager: <info>  (eth0): carrier now ON
(device state
2)

Nov 19 12:18:54 brutal NetworkManager: <info>  (eth0): device state change:
2 -> 3
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) starting
connection 'Auto eth0'
Nov 19 12:18:54 brutal NetworkManager: <info>  (eth0): device state change:
3 -> 4
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 1 of
5 (Device Prepare) scheduled...
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 1 of
5 (Device Prepare) started...
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 2 of
5 (Device Configure) scheduled...
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 1 of
5 (Device Prepare) complete.
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 2 of
5 (Device Configure) starting...
Nov 19 12:18:54 brutal NetworkManager: <info>  (eth0): device state change:
4 -> 5
Nov 19 12:18:54 brutal vmnetBridge: RTM_NEWLINK: name:eth0 index:3
flags:0x00011043
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 2 of
5 (Device Configure) successful.
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 3 of
5 (IP Configure Start) scheduled.
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 2 of
5 (Device Configure) complete.
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 3 of
5 (IP Configure Start) started...
Nov 19 12:18:54 brutal NetworkManager: <info>  (eth0): device state change:
5 -> 7
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Beginning
DHCP transaction.
Nov 19 12:18:54 brutal NetworkManager: <info>  dhcpcd started with pid 30481
Nov 19 12:18:54 brutal NetworkManager: <info>  Activation (eth0) Stage 3 of
5 (IP Configure Start) complete.
Nov 19 12:18:54 brutal dhcpcd[30481]: eth0: dhcpcd 4.0.13 starting
Nov 19 12:18:54 brutal NetworkManager: <info>  DHCP: device eth0 state
changed (null) -> preinit
Nov 19 12:18:54 brutal dhcpcd[30481]: eth0: broadcasting for a lease
Nov 19 12:18:54 brutal dhcpcd[30481]: eth0: offered  from
Nov 19 12:18:54 brutal dhcpcd[30481]: eth0: ignoring offer of  from
Nov 19 12:18:54 brutal dhcpcd[30481]: eth0: acknowledged  from
Nov 19 12:18:54 brutal dhcpcd[30481]: eth0: checking  is available on
attached networks
Nov 19 12:18:54 brutal kernel: /dev/vmnet: open called by PID 7372
(vmnet-bridge)
Nov 19 12:18:54 brutal kernel: /dev/vmnet: hub 0 does not exist, allocating
memory.
Nov 19 12:18:54 brutal kernel: /dev/vmnet: port on hub 0 successfully opened
Nov 19 12:18:54 brutal kernel: bridge-eth0: up
Nov 19 12:18:54 brutal kernel: bridge-eth0: attached
Nov 19 12:18:54 brutal vmnetBridge: Started bridge eth0 to virtual network
0.
Nov 19 12:19:00 brutal dhcpcd[30481]: eth0: leased  for 432000 seconds
Nov 19 12:19:00 brutal NetworkManager: <info>  DHCP: device eth0 state
changed preinit -> bound
Nov 19 12:19:00 brutal NetworkManager: <info>  Activation (eth0) Stage 4 of
5 (IP Configure Get) scheduled...
Nov 19 12:19:00 brutal NetworkManager: <info>  Activation (eth0) Stage 4 of
5 (IP Configure Get) started...
Nov 19 12:19:00 brutal NetworkManager: <info>    address
Nov 19 12:19:00 brutal NetworkManager: <info>    prefix 24 (255.255.255.0)
Nov 19 12:19:00 brutal NetworkManager: <info>    gateway
Nov 19 12:19:00 brutal NetworkManager: <info>    nameserver
Nov 19 12:19:00 brutal NetworkManager: <info>    nameserver
Nov 19 12:19:00 brutal NetworkManager: <info>    nameserver
Nov 19 12:19:00 brutal NetworkManager: <info>    domain name
Nov 19 12:19:00 brutal NetworkManager: <info>  Activation (eth0) Stage 5 of
5 (IP Configure Commit) scheduled...
Nov 19 12:19:00 brutal NetworkManager: <info>  Activation (eth0) Stage 4 of
5 (IP Configure Get) complete.
Nov 19 12:19:00 brutal NetworkManager: <info>  Activation (eth0) Stage 5 of
5 (IP Configure Commit) started...
Nov 19 12:19:01 brutal NetworkManager: <info>  (eth0): writing resolv.conf
to /sbin/resolvconf
Nov 19 12:19:01 brutal NetworkManager: <info>  (eth0): device state change:
7 -> 8
Nov 19 12:19:01 brutal NetworkManager: <info>  (eth0): writing resolv.conf
to /sbin/resolvconf
Nov 19 12:19:01 brutal NetworkManager: <info>  Policy set 'Auto eth0' (eth0)
as default for routing and DNS.
Nov 19 12:19:01 brutal NetworkManager: <info>  Activation (eth0) successful,
device activated.
Nov 19 12:19:01 brutal NetworkManager: <info>  Activation (eth0) Stage 5 of
5 (IP Configure Commit) complete.
Nov 19 12:19:04 brutal kernel: eth0: no IPv6 routers present