1 |
Hi Harry, |
2 |
|
3 |
first of all, |
4 |
have you enabled |
5 |
Device-Drivers/Hardware monitoring support/ |
6 |
AMD Phenom/Sempron/Turion/Opteron temperature sensor ? |
7 |
|
8 |
and then |
9 |
Winbond W83627EHF/EHG/DHG, W83667HG |
10 |
|
11 |
I have an ASRock M3A790GXH/128M board. |
12 |
|
13 |
I'm running the 2.6.33-gentoo kernel, as well. |
14 |
(It's the first one to support the Phenom (K10) temperature |
15 |
sensor.) |
16 |
|
17 |
Helmut. |
18 |
|
19 |
|
20 |
|
21 |
|
22 |
On 22 Mar, Harry Putnam wrote: |
23 |
> Helmut Jarausch <jarausch@××××××××××××××××.de> writes: |
24 |
> |
25 |
>> On 21 Mar, Harry Putnam wrote: |
26 |
>>> Harry Putnam <reader@×××××××.com> writes: |
27 |
>>> |
28 |
>>> Forgot to give kernel version: |
29 |
>>> uname -r |
30 |
>>> 2.6.33-gentoo |
31 |
>>> |
32 |
>>>> I see lots of bug reports about this in several linux OSs but not able |
33 |
>>>> to see a solution. |
34 |
>>>> |
35 |
>>>> I've make the propers kernel settings and the w83627hf modules is |
36 |
>>>> built and available in /lib/modules/* |
37 |
>>>> I tried rebuilding the kernel with that stuff built-in. but then |
38 |
>>>> lm_sensors couldn't even find tools to work with when running |
39 |
>>>> sensors-detect |
40 |
>>>> |
41 |
>>>> So calling `sensors' just in case it would work: |
42 |
>>>> # sensors |
43 |
>>>> No sensors found! |
44 |
>>>> Make sure you loaded all the kernel drivers you need. |
45 |
>>>> Try sensors-detect to find out which these are. |
46 |
>>>> |
47 |
> |
48 |
> [...] |
49 |
> |
50 |
>> |
51 |
>> I can only report that I've built a 2.6.33-gentoo kernel with |
52 |
>> the device (sensors) Winbond W83627EHF/EF/EHG/EG |
53 |
>> built in (not just a module), then ran sensors-detect |
54 |
>> and now, xsensor works just fine (on a Phenom-II) |
55 |
> |
56 |
> In my version of 2.6.33-gentoo I don't see that as a choice in |
57 |
> make menuconfig... none of the winbond lines match what you show |
58 |
> above. The last one below is closest and as you see I have built it |
59 |
> in. |
60 |
> |
61 |
> | | < > Winbond W83781D, W83782D, W83783S, Asus AS99127F | | |
62 |
> | | < > Winbond W83791D | | |
63 |
> | | < > Winbond W83792D | | |
64 |
> | | < > Winbond W83793 | | |
65 |
> | | < > Winbond W83L785TS-S | | |
66 |
> | | < > Winbond W83L786NG, W83L786NR | | |
67 |
> | | <*> Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF | | |
68 |
> | | <*> Winbond W83627EHF/EHG/DHG, W83667HG |
69 |
> |
70 |
> But as you can see I've built in the last two. |
71 |
> |
72 |
> After installing that kernel and reboot |
73 |
> |
74 |
> The tail of: |
75 |
> sensors-detect |
76 |
> |
77 |
> [...] |
78 |
> |
79 |
> Now follows a summary of the probes I have just done. |
80 |
> Just press ENTER to continue: |
81 |
> |
82 |
> Driver `w83627hf': |
83 |
> * ISA bus, address 0x290 |
84 |
> Chip `Winbond W83627THF/THG Super IO Sensors' (confidence: 9) |
85 |
> |
86 |
> Warning: the required module w83627hf is not currently installed |
87 |
> on your system. If it is built into the kernel then it's OK. |
88 |
> Otherwise, check http://www.lm-sensors.org/wiki/Devices for |
89 |
> driver availability. |
90 |
> |
91 |
> No modules to load, skipping modules configuration. |
92 |
> |
93 |
> Unloading i2c-dev... OK |
94 |
> |
95 |
> And following with: |
96 |
> |
97 |
> # sensors |
98 |
> |
99 |
> No sensors found! |
100 |
> Make sure you loaded all the kernel drivers you need. |
101 |
> Try sensors-detect to find out which these are. |
102 |
> |
103 |
> ------- --------- ---=--- --------- -------- |
104 |
> |
105 |
> What motheboard are you running: |
106 |
> |
107 |
> Here is what `lshw', followed `hwinfo' had to say about my motherboard |
108 |
> Or at least I think thats what this output is: |
109 |
> |
110 |
> from lswh: |
111 |
> reader |
112 |
> description: Desktop Computer |
113 |
> product: MS-6728 |
114 |
> vendor: MICRO-STAR INC. |
115 |
> version: 2.00 |
116 |
> serial: 00000000 |
117 |
> width: 32 bits |
118 |
> capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp |
119 |
> configuration: chassis=desktop cpus=1 |
120 |
> *-core |
121 |
> description: Motherboard |
122 |
> product: MS-6728 |
123 |
> vendor: MICRO-STAR INC. |
124 |
> physical id: 0 |
125 |
> version: 2.00 |
126 |
> serial: 00000000 |
127 |
> *-firmware |
128 |
> description: BIOS |
129 |
> vendor: American Megatrends Inc. |
130 |
> physical id: 0 |
131 |
> version: V3.A (09/29/2004) |
132 |
> size: 64KiB |
133 |
> capacity: 448KiB |
134 |
> capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification |
135 |
> |
136 |
> ------- --------- ---=--- --------- -------- |
137 |
> from hwinfo: |
138 |
> |
139 |
> 01: None 00.0: 10105 BIOS |
140 |
> [Created at bios.190] |
141 |
> Unique ID: rdCR.lZF+r4EgHp4 |
142 |
> Hardware Class: bios |
143 |
> BIOS Keyboard LED Status: |
144 |
> Scroll Lock: off |
145 |
> Num Lock: on |
146 |
> Caps Lock: off |
147 |
> Serial Port 0: 0x3f8 |
148 |
> Serial Port 1: 0x3e8 |
149 |
> Parallel Port 0: 0x378 |
150 |
> Base Memory: 639 kB |
151 |
> PnP BIOS: @@@0000 |
152 |
> MP spec rev 1.4 info: |
153 |
> OEM id: "INTEL" |
154 |
> Product id: "I865G/GE/PE" |
155 |
> 1 CPUs (0 disabled) |
156 |
> BIOS32 Service Directory Entry: 0xfdb60 |
157 |
> SMBIOS Version: 2.3 |
158 |
> BIOS Info: #0 |
159 |
> Vendor: "American Megatrends Inc." |
160 |
> Version: "V3.A" |
161 |
> Date: "09/29/2004" |
162 |
> Start Address: 0xf0000 |
163 |
> ROM Size: 512 kB |
164 |
> Features: 0x0137000000006fcbde90 |
165 |
> ISA supported |
166 |
> PCI supported |
167 |
> PnP supported |
168 |
> APM supported |
169 |
> BIOS flashable |
170 |
> BIOS shadowing allowed |
171 |
> ESCD supported |
172 |
> CD boot supported |
173 |
> Selectable boot supported |
174 |
> BIOS ROM socketed |
175 |
> EDD spec supported |
176 |
> 360kB Floppy supported |
177 |
> 1.2MB Floppy supported |
178 |
> 720kB Floppy supported |
179 |
> 2.88MB Floppy supported |
180 |
> Print Screen supported |
181 |
> 8042 Keyboard Services supported |
182 |
> Printer Services supported |
183 |
> CGA/Mono Video supported |
184 |
> ACPI supported |
185 |
> USB Legacy supported |
186 |
> AGP supported |
187 |
> LS-120 boot supported |
188 |
> ATAPI ZIP boot supported |
189 |
> BIOS Boot Spec supported |
190 |
> System Info: #1 |
191 |
> Manufacturer: "MICRO-STAR INC." |
192 |
> Product: "MS-6728" |
193 |
> Version: "2.00" |
194 |
> Serial: "00000000" |
195 |
> UUID: undefined |
196 |
> Wake-up: 0x04 (Modem Ring) |
197 |
> Board Info: #2 |
198 |
> Manufacturer: "MICRO-STAR INC." |
199 |
> Product: "MS-6728" |
200 |
> Version: "2.00" |
201 |
> Serial: "00000000" |
202 |
> |
203 |
> |
204 |
|
205 |
-- |
206 |
Helmut Jarausch |
207 |
|
208 |
Lehrstuhl fuer Numerische Mathematik |
209 |
RWTH - Aachen University |
210 |
D 52056 Aachen, Germany |