| 1 |
On Thu, 2006-03-23 at 21:24 -0700, Richard Fish wrote: |
| 2 |
> On 3/23/06, Joseph <syscon@×××××××××.com> wrote: |
| 3 |
> > That is interesting. |
| 4 |
> > My DVD burner is connected to IDE controller and I have in kernel |
| 5 |
> > enabled both options support: |
| 6 |
> > <*> Include IDE/ATAPI CDROM support |
| 7 |
> > and |
| 8 |
> > <*> SCSI CDROM support |
| 9 |
> > My DVD is recognized as /dev/hdc |
| 10 |
> > |
| 11 |
> > If I disable first option "DE/ATAPI CDROM support" will the drive be |
| 12 |
> > recognized as /dev/sr0 ??? |
| 13 |
> |
| 14 |
> No, you would need to disable (or at least modularize) all IDE/ATAPI |
| 15 |
> support (# CONFIG_IDE is not set). |
| 16 |
> |
| 17 |
> But this would _only_ be an option if you actually have a SATA |
| 18 |
> chipset. If it is truly a PATA controller, then you won't get |
| 19 |
> /dev/sr0 no matter what you do. [1] |
| 20 |
> |
| 21 |
> Maybe you can post your dmesg output? |
| 22 |
> |
| 23 |
> -Richard |
| 24 |
|
| 25 |
OK, here is dmesg output, the last two lines indicate that: |
| 26 |
hdc: DMA disabled |
| 27 |
hdc: ATAPI reset complete |
| 28 |
|
| 29 |
What application reseted the DMA, I don't know? |
| 30 |
|
| 31 |
----------dmesg------------- |
| 32 |
Bootdata ok (command line is root=/dev/sda3 pci=noacpi noapic) |
| 33 |
Linux version 2.6.15-gentoo-r4 (root@syscon3) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #3 SMP Sat Feb 25 17:33:09 MST 2006 |
| 34 |
BIOS-provided physical RAM map: |
| 35 |
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) |
| 36 |
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) |
| 37 |
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) |
| 38 |
BIOS-e820: 0000000000100000 - 000000001ffb0000 (usable) |
| 39 |
BIOS-e820: 000000001ffb0000 - 000000001ffc0000 (ACPI data) |
| 40 |
BIOS-e820: 000000001ffc0000 - 000000001fff0000 (ACPI NVS) |
| 41 |
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) |
| 42 |
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) |
| 43 |
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa8d0 |
| 44 |
ACPI: RSDT (v001 A M I OEMRSDT 0x03000509 MSFT 0x00000097) @ 0x000000001ffb0000 |
| 45 |
ACPI: FADT (v001 A M I OEMFACP 0x03000509 MSFT 0x00000097) @ 0x000000001ffb0200 |
| 46 |
ACPI: OEMB (v001 A M I OEMBIOS 0x03000509 MSFT 0x00000097) @ 0x000000001ffc0040 |
| 47 |
ACPI: DSDT (v001 A0277 A0277001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000 |
| 48 |
Scanning NUMA topology in Northbridge 24 |
| 49 |
Number of nodes 1 |
| 50 |
Node 0 MemBase 0000000000000000 Limit 000000001ffb0000 |
| 51 |
Using 63 for the hash shift. |
| 52 |
Using node hash shift of 63 |
| 53 |
Bootmem setup node 0 0000000000000000-000000001ffb0000 |
| 54 |
On node 0 totalpages: 127885 |
| 55 |
DMA zone: 2723 pages, LIFO batch:0 |
| 56 |
DMA32 zone: 125162 pages, LIFO batch:31 |
| 57 |
Normal zone: 0 pages, LIFO batch:0 |
| 58 |
HighMem zone: 0 pages, LIFO batch:0 |
| 59 |
ACPI: PM-Timer IO Port: 0x808 |
| 60 |
Intel MultiProcessor Specification v1.1 |
| 61 |
Virtual Wire compatibility mode. |
| 62 |
OEM ID: ASUSTeK <6>Product ID: <6>APIC at: 0xFEE00000 |
| 63 |
Processor #0 15:15 APIC version 16 |
| 64 |
I/O APIC #1 Version 3 at 0xFEC00000. |
| 65 |
Setting APIC routing to flat |
| 66 |
Processors: 1 |
| 67 |
Allocating PCI resources starting at 30000000 (gap: 20000000:df780000) |
| 68 |
Checking aperture... |
| 69 |
CPU 0: aperture @ e8000000 size 128 MB |
| 70 |
Built 1 zonelists |
| 71 |
Kernel command line: root=/dev/sda3 pci=noacpi noapic |
| 72 |
Initializing CPU#0 |
| 73 |
PID hash table entries: 2048 (order: 11, 65536 bytes) |
| 74 |
time.c: Using 3.579545 MHz PM timer. |
| 75 |
time.c: Detected 1802.396 MHz processor. |
| 76 |
Console: colour VGA+ 80x25 |
| 77 |
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| 78 |
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| 79 |
Memory: 510632k/523968k available (2753k kernel code, 12948k reserved, 1294k data, 228k init) |
| 80 |
Calibrating delay using timer specific routine.. 3613.38 BogoMIPS (lpj=7226767) |
| 81 |
Mount-cache hash table entries: 256 |
| 82 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
| 83 |
CPU: L2 Cache: 512K (64 bytes/line) |
| 84 |
CPU 0(1) -> Node 0 -> Core 0 |
| 85 |
mtrr: v2.0 (20020519) |
| 86 |
ACPI: setting ELCR to 0e20 (from 0c20) |
| 87 |
Using local APIC timer interrupts. |
| 88 |
Detected 12.516 MHz APIC timer. |
| 89 |
Brought up 1 CPUs |
| 90 |
time.c: Using PIT/TSC based timekeeping. |
| 91 |
testing NMI watchdog ... OK. |
| 92 |
NET: Registered protocol family 16 |
| 93 |
ACPI: bus type pci registered |
| 94 |
PCI: Using configuration type 1 |
| 95 |
ACPI: Subsystem revision 20050902 |
| 96 |
ACPI: Interpreter enabled |
| 97 |
ACPI: Using PIC for interrupt routing |
| 98 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
| 99 |
pnp: PnP ACPI init |
| 100 |
pnp: PnP ACPI: found 12 devices |
| 101 |
SCSI subsystem initialized |
| 102 |
usbcore: registered new driver usbfs |
| 103 |
usbcore: registered new driver hub |
| 104 |
PCI: Probing PCI hardware |
| 105 |
PCI: Probing PCI hardware (bus 00) |
| 106 |
Boot video device is 0000:01:00.0 |
| 107 |
PCI: Using IRQ router default [1106/3227] at 0000:00:11.0 |
| 108 |
PCI: IRQ 0 for device 0000:00:0f.1 doesn't match PIRQ mask - try pci=usepirqmask |
| 109 |
agpgart: Detected AGP bridge 0 |
| 110 |
agpgart: AGP aperture is 128M @ 0xe8000000 |
| 111 |
PCI-DMA: Disabling IOMMU. |
| 112 |
pnp: 00:07: ioport range 0x680-0x6ff has been reserved |
| 113 |
pnp: 00:07: ioport range 0x290-0x297 has been reserved |
| 114 |
PCI: Bridge: 0000:00:01.0 |
| 115 |
IO window: disabled. |
| 116 |
MEM window: faf00000-fbffffff |
| 117 |
PREFETCH window: f0000000-f9ffffff |
| 118 |
PCI: Setting latency timer of device 0000:00:01.0 to 64 |
| 119 |
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ |
| 120 |
Total HugeTLB memory allocated, 0 |
| 121 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
| 122 |
io scheduler noop registered |
| 123 |
io scheduler deadline registered |
| 124 |
io scheduler cfq registered |
| 125 |
Real Time Clock Driver v1.12 |
| 126 |
Linux agpgart interface v0.101 (c) Dave Jones |
| 127 |
ACPI: Power Button (FF) [PWRF] |
| 128 |
ACPI: Power Button (CM) [PWRB] |
| 129 |
ACPI: Sleep Button (CM) [SLPB] |
| 130 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 |
| 131 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 132 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 133 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled |
| 134 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 135 |
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 136 |
mice: PS/2 mouse device common for all mice |
| 137 |
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize |
| 138 |
loop: loaded (max 8 devices) |
| 139 |
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@××××.de) and petero2@×××××.com |
| 140 |
skge 1.3 addr 0xfac00000 irq 11 chip Yukon-Lite rev 9 |
| 141 |
skge eth0: addr 00:11:d8:d6:e0:ca |
| 142 |
tun: Universal TUN/TAP device driver, 1.6 |
| 143 |
tun: (C) 1999-2004 Max Krasnyansky <maxk@××××××××.com> |
| 144 |
netconsole: not configured, aborting |
| 145 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 146 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
| 147 |
VP_IDE: IDE controller at PCI slot 0000:00:0f.1 |
| 148 |
PCI: IRQ 0 for device 0000:00:0f.1 doesn't match PIRQ mask - try pci=usepirqmask |
| 149 |
PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0 |
| 150 |
VP_IDE: chipset revision 6 |
| 151 |
VP_IDE: not 100% native mode: will probe irqs later |
| 152 |
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 |
| 153 |
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio |
| 154 |
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio |
| 155 |
Probing IDE interface ide0... |
| 156 |
input: AT Translated Set 2 keyboard as /class/input/input0 |
| 157 |
input: ImPS/2 Generic Wheel Mouse as /class/input/input1 |
| 158 |
Probing IDE interface ide1... |
| 159 |
hdc: BENQ DVD DD DW1620, ATAPI CD/DVD-ROM drive |
| 160 |
ide1 at 0x170-0x177,0x376 on irq 15 |
| 161 |
Probing IDE interface ide0... |
| 162 |
hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) |
| 163 |
Uniform CD-ROM driver Revision: 3.20 |
| 164 |
libata version 1.20 loaded. |
| 165 |
sata_via 0000:00:0f.0: version 1.1 |
| 166 |
sata_via 0000:00:0f.0: routed to hard irq line 11 |
| 167 |
ata1: SATA max UDMA/133 cmd 0xD800 ctl 0xD402 bmdma 0xC400 irq 11 |
| 168 |
ata2: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xC408 irq 11 |
| 169 |
ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:407f |
| 170 |
ata1: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48 |
| 171 |
ata1: dev 0 configured for UDMA/133 |
| 172 |
scsi0 : sata_via |
| 173 |
ata2: no device found (phy stat 00000000) |
| 174 |
scsi1 : sata_via |
| 175 |
Vendor: ATA Model: Maxtor 6L200M0 Rev: BANC |
| 176 |
Type: Direct-Access ANSI SCSI revision: 05 |
| 177 |
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) |
| 178 |
SCSI device sda: drive cache: write back |
| 179 |
SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) |
| 180 |
SCSI device sda: drive cache: write back |
| 181 |
sda: sda1 sda2 sda3 sda4 |
| 182 |
sd 0:0:0:0: Attached scsi disk sda |
| 183 |
sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 184 |
ehci_hcd 0000:00:10.4: EHCI Host Controller |
| 185 |
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 |
| 186 |
ehci_hcd 0000:00:10.4: irq 10, io mem 0xfae00000 |
| 187 |
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 |
| 188 |
hub 1-0:1.0: USB hub found |
| 189 |
hub 1-0:1.0: 4 ports detected |
| 190 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
| 191 |
USB Universal Host Controller Interface driver v2.3 |
| 192 |
uhci_hcd 0000:00:10.0: UHCI Host Controller |
| 193 |
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 |
| 194 |
uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e000 |
| 195 |
hub 2-0:1.0: USB hub found |
| 196 |
hub 2-0:1.0: 2 ports detected |
| 197 |
uhci_hcd 0000:00:10.1: UHCI Host Controller |
| 198 |
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 |
| 199 |
uhci_hcd 0000:00:10.1: irq 5, io base 0x0000e400 |
| 200 |
hub 3-0:1.0: USB hub found |
| 201 |
hub 3-0:1.0: 2 ports detected |
| 202 |
usbcore: registered new driver usblp |
| 203 |
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver |
| 204 |
Initializing USB Mass Storage driver... |
| 205 |
usbcore: registered new driver usb-storage |
| 206 |
USB Mass Storage support registered. |
| 207 |
usbcore: registered new driver usbhid |
| 208 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
| 209 |
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21 2005 UTC). |
| 210 |
PCI: Setting latency timer of device 0000:00:11.5 to 64 |
| 211 |
ALSA device list: |
| 212 |
#0: VIA 8237 with ALC850 at 0xe800, irq 10 |
| 213 |
oprofile: using NMI interrupt. |
| 214 |
NET: Registered protocol family 2 |
| 215 |
IP route cache hash table entries: 4096 (order: 3, 32768 bytes) |
| 216 |
TCP established hash table entries: 16384 (order: 6, 262144 bytes) |
| 217 |
TCP bind hash table entries: 16384 (order: 6, 262144 bytes) |
| 218 |
TCP: Hash tables configured (established 16384 bind 16384) |
| 219 |
TCP reno registered |
| 220 |
TCP bic registered |
| 221 |
NET: Registered protocol family 1 |
| 222 |
NET: Registered protocol family 10 |
| 223 |
IPv6 over IPv4 tunneling driver |
| 224 |
NET: Registered protocol family 17 |
| 225 |
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4) |
| 226 |
powernow-k8: BIOS error - no PSB or ACPI _PSS objects |
| 227 |
kjournald starting. Commit interval 5 seconds |
| 228 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 229 |
VFS: Mounted root (ext3 filesystem) readonly. |
| 230 |
Freeing unused kernel memory: 228k freed |
| 231 |
Adding 1004052k swap on /dev/sda2. Priority:-1 extents:1 across:1004052k |
| 232 |
EXT3 FS on sda3, internal journal |
| 233 |
kjournald starting. Commit interval 5 seconds |
| 234 |
EXT3 FS on sda4, internal journal |
| 235 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 236 |
Adding 2097144k swap on /mnt/extraswap. Priority:-2 extents:536 across:2567848k |
| 237 |
skge eth0: enabling interface |
| 238 |
ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 239 |
skge eth0: Link is up at 10 Mbps, half duplex, flow control none |
| 240 |
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 241 |
pktcdvd: writer pktcdvd0 mapped to hdc |
| 242 |
spurious 8259A interrupt: IRQ7. |
| 243 |
eth0: no IPv6 routers present |
| 244 |
hdc: irq timeout: status=0x90 { Busy } |
| 245 |
ide: failed opcode was: unknown |
| 246 |
hdc: DMA disabled |
| 247 |
hdc: ATAPI reset complete |
| 248 |
--------end dmesg-------------- |
| 249 |
-- |
| 250 |
#Joseph |
| 251 |
-- |
| 252 |
gentoo-user@g.o mailing list |
Archives