| 1 |
2011/1/20 <meino.cramer@×××.de>: |
| 2 |
> |
| 3 |
> bttv: driver version 0.9.18 loaded |
| 4 |
> bttv: using 8 buffers with 2080k (520 pages) each for capture |
| 5 |
> bttv: Bt8xx card found (0). |
| 6 |
> bttv 0000:01:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 |
| 7 |
> bttv0: Bt878 (rev 17) at 0000:01:06.0, irq: 21, latency: 64, mmio: 0xd5fff000 |
| 8 |
> bttv0: detected: AVermedia AverTV DVB-T 771 [card=123], PCI subsystem ID is 1461:0771 |
| 9 |
> bttv0: using: AVerMedia AVerTV DVB-T 771 [card=123,autodetected] |
| 10 |
> bttv0: gpio: en=00000000, out=00000000 in=00d7710f [init] |
| 11 |
> bttv0: tuner absent |
| 12 |
> bttv0: registered device video0 |
| 13 |
> bttv0: registered device vbi0 |
| 14 |
> bttv0: PLL: 28636363 => 35468950 . |
| 15 |
> serial 0000:03:00.1: PCI INT A -> GSI 40 (level, low) -> IRQ 40 |
| 16 |
> Couldn't register serial port 0000:03:00.1: -28 |
| 17 |
> . ok |
| 18 |
> bttv0: add subdevice "dvb0" |
| 19 |
> *** IR keymap rc-avermedia-dvbt not found |
| 20 |
> *** Registered IR keymap rc-empty |
| 21 |
> input: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0/input6 |
| 22 |
> rc0: bttv IR (card=123) as /devices/pci0000:00/0000:00:14.4/0000:01:06.0/rc/rc0 |
| 23 |
> bt878: AUDIO driver version 0.0.0 loaded |
| 24 |
> bt878: Bt878 AUDIO function found (0). |
| 25 |
> bt878 0000:01:06.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21 |
| 26 |
> bt878_probe: card id=[0x7711461],[ AVermedia AverTV DVB-T 771 ] has DVB functions. |
| 27 |
> bt878(0): Bt878 (rev 17) at 01:06.1, irq: 21, latency: 64, memory: 0xd5ffe000 |
| 28 |
|
| 29 |
Take a look in the kernel configuration. I think there should be |
| 30 |
something like this Drivers -> Media -> IR. |
| 31 |
|
| 32 |
-- |
| 33 |
Daniel Pielmeier |
Archives