| 1 |
thegeezer wrote: |
| 2 |
> this is pretty bad. enough to really go and get a replacement asap, |
| 3 |
> and turn that disk off if you can. the self test stops at the first |
| 4 |
> error it comes to and in this case it is LBA#2905482560 for |
| 5 |
> calculation of where the error is check out the smartcl [1] site which |
| 6 |
> will help you to mark the block bad though the data that was in that |
| 7 |
> block is probably lost forever. i'd also suggest you run # smartctl -a |
| 8 |
> /dev/sdc and paste the results here. the crucial rows are 196/197 the |
| 9 |
> reallocated sector counts and pending sector counts. they show how |
| 10 |
> many blocks have been reallocated, and also how many are pending. this |
| 11 |
> will give you a scaling factor, at the moment you are in trouble, if |
| 12 |
> these figures are very high you are in very high trouble, if they are |
| 13 |
> low you are in low trouble. [1] |
| 14 |
> http://smartmontools.sourceforge.net/badblockhowto.html |
| 15 |
|
| 16 |
Here is the output: |
| 17 |
|
| 18 |
root@fireball / # smartctl -a /dev/sdc |
| 19 |
smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.14.0-gentoo] (local build) |
| 20 |
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org |
| 21 |
|
| 22 |
=== START OF INFORMATION SECTION === |
| 23 |
Model Family: Seagate Barracuda 7200.14 (AF) |
| 24 |
Device Model: ST3000DM001-9YN166 |
| 25 |
Serial Number: Z1F0PKT5 |
| 26 |
LU WWN Device Id: 5 000c50 04d79e15c |
| 27 |
Firmware Version: CC4C |
| 28 |
User Capacity: 3,000,592,982,016 bytes [3.00 TB] |
| 29 |
Sector Sizes: 512 bytes logical, 4096 bytes physical |
| 30 |
Rotation Rate: 7200 rpm |
| 31 |
Device is: In smartctl database [for details use: -P show] |
| 32 |
ATA Version is: ATA8-ACS T13/1699-D revision 4 |
| 33 |
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) |
| 34 |
Local Time is: Wed Jun 25 02:46:39 2014 CDT |
| 35 |
|
| 36 |
==> WARNING: A firmware update for this drive is available, |
| 37 |
see the following Seagate web pages: |
| 38 |
http://knowledge.seagate.com/articles/en_US/FAQ/207931en |
| 39 |
http://knowledge.seagate.com/articles/en_US/FAQ/223651en |
| 40 |
|
| 41 |
SMART support is: Available - device has SMART capability. |
| 42 |
SMART support is: Enabled |
| 43 |
|
| 44 |
=== START OF READ SMART DATA SECTION === |
| 45 |
SMART overall-health self-assessment test result: PASSED |
| 46 |
|
| 47 |
General SMART Values: |
| 48 |
Offline data collection status: (0x00) Offline data collection activity |
| 49 |
was never started. |
| 50 |
Auto Offline Data Collection: |
| 51 |
Disabled. |
| 52 |
Self-test execution status: ( 118) The previous self-test completed |
| 53 |
having |
| 54 |
the read element of the test failed. |
| 55 |
Total time to complete Offline |
| 56 |
data collection: ( 584) seconds. |
| 57 |
Offline data collection |
| 58 |
capabilities: (0x73) SMART execute Offline immediate. |
| 59 |
Auto Offline data collection |
| 60 |
on/off support. |
| 61 |
Suspend Offline collection upon new |
| 62 |
command. |
| 63 |
No Offline surface scan supported. |
| 64 |
Self-test supported. |
| 65 |
Conveyance Self-test supported. |
| 66 |
Selective Self-test supported. |
| 67 |
SMART capabilities: (0x0003) Saves SMART data before entering |
| 68 |
power-saving mode. |
| 69 |
Supports SMART auto save timer. |
| 70 |
Error logging capability: (0x01) Error logging supported. |
| 71 |
General Purpose Logging supported. |
| 72 |
Short self-test routine |
| 73 |
recommended polling time: ( 1) minutes. |
| 74 |
Extended self-test routine |
| 75 |
recommended polling time: ( 340) minutes. |
| 76 |
Conveyance self-test routine |
| 77 |
recommended polling time: ( 2) minutes. |
| 78 |
SCT capabilities: (0x3085) SCT Status supported. |
| 79 |
|
| 80 |
SMART Attributes Data Structure revision number: 10 |
| 81 |
Vendor Specific SMART Attributes with Thresholds: |
| 82 |
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE |
| 83 |
UPDATED WHEN_FAILED RAW_VALUE |
| 84 |
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail |
| 85 |
Always - 234421760 |
| 86 |
3 Spin_Up_Time 0x0003 092 092 000 Pre-fail |
| 87 |
Always - 0 |
| 88 |
4 Start_Stop_Count 0x0032 100 100 020 Old_age |
| 89 |
Always - 33 |
| 90 |
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail |
| 91 |
Always - 0 |
| 92 |
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail |
| 93 |
Always - 99909120 |
| 94 |
9 Power_On_Hours 0x0032 082 082 000 Old_age |
| 95 |
Always - 16379 |
| 96 |
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail |
| 97 |
Always - 0 |
| 98 |
12 Power_Cycle_Count 0x0032 100 100 020 Old_age |
| 99 |
Always - 34 |
| 100 |
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age |
| 101 |
Always - 0 |
| 102 |
184 End-to-End_Error 0x0032 100 100 099 Old_age |
| 103 |
Always - 0 |
| 104 |
187 Reported_Uncorrect 0x0032 100 100 000 Old_age |
| 105 |
Always - 0 |
| 106 |
188 Command_Timeout 0x0032 100 100 000 Old_age |
| 107 |
Always - 0 0 0 |
| 108 |
189 High_Fly_Writes 0x003a 100 100 000 Old_age |
| 109 |
Always - 0 |
| 110 |
190 Airflow_Temperature_Cel 0x0022 069 063 045 Old_age |
| 111 |
Always - 31 (Min/Max 26/33) |
| 112 |
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age |
| 113 |
Always - 0 |
| 114 |
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age |
| 115 |
Always - 9 |
| 116 |
193 Load_Cycle_Count 0x0032 093 093 000 Old_age |
| 117 |
Always - 14284 |
| 118 |
194 Temperature_Celsius 0x0022 031 040 000 Old_age |
| 119 |
Always - 31 (0 17 0 0 0) |
| 120 |
197 Current_Pending_Sector 0x0012 100 100 000 Old_age |
| 121 |
Always - 104 |
| 122 |
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age |
| 123 |
Offline - 104 |
| 124 |
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age |
| 125 |
Always - 0 |
| 126 |
240 Head_Flying_Hours 0x0000 100 253 000 Old_age |
| 127 |
Offline - 15955h+37m+28.932s |
| 128 |
241 Total_LBAs_Written 0x0000 100 253 000 Old_age |
| 129 |
Offline - 52221690631887 |
| 130 |
242 Total_LBAs_Read 0x0000 100 253 000 Old_age |
| 131 |
Offline - 74848968465606 |
| 132 |
|
| 133 |
SMART Error Log Version: 1 |
| 134 |
No Errors Logged |
| 135 |
|
| 136 |
SMART Self-test log structure revision number 1 |
| 137 |
Num Test_Description Status Remaining |
| 138 |
LifeTime(hours) LBA_of_first_error |
| 139 |
# 1 Extended offline Completed: read failure 60% |
| 140 |
16365 2905482560 |
| 141 |
# 2 Extended offline Completed: read failure 60% |
| 142 |
16352 2905482560 |
| 143 |
# 3 Extended offline Completed without error 00% |
| 144 |
8044 - |
| 145 |
# 4 Extended offline Completed without error 00% |
| 146 |
3121 - |
| 147 |
# 5 Extended offline Completed without error 00% |
| 148 |
1548 - |
| 149 |
# 6 Short offline Completed without error 00% |
| 150 |
1141 - |
| 151 |
# 7 Extended offline Completed without error 00% |
| 152 |
719 - |
| 153 |
# 8 Extended offline Completed without error 00% |
| 154 |
525 - |
| 155 |
# 9 Short offline Completed without error 00% |
| 156 |
516 - |
| 157 |
#10 Extended offline Completed without error 00% |
| 158 |
18 - |
| 159 |
#11 Extended offline Completed without error 00% |
| 160 |
5 - |
| 161 |
#12 Short offline Completed without error 00% |
| 162 |
0 - |
| 163 |
|
| 164 |
SMART Selective self-test log data structure revision number 1 |
| 165 |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| 166 |
1 0 0 Not_testing |
| 167 |
2 0 0 Not_testing |
| 168 |
3 0 0 Not_testing |
| 169 |
4 0 0 Not_testing |
| 170 |
5 0 0 Not_testing |
| 171 |
Selective self-test flags (0x0): |
| 172 |
After scanning selected spans, do NOT read-scan remainder of disk. |
| 173 |
If Selective self-test is pending on power-up, resume after 0 minute delay. |
| 174 |
|
| 175 |
root@fireball / # |
| 176 |
|
| 177 |
Does that help shed any light on this situation? If you need more |
| 178 |
info, just let me know. Off to newegg. BRB |
| 179 |
|
| 180 |
Dale |
| 181 |
|
| 182 |
:-) :-) |
| 183 |
|
| 184 |
-- |
| 185 |
I am only responsible for what I said ... Not for what you understood or how you interpreted my words! |
Archives