1 |
On 24 July 2006 12:30, Nick Rout wrote: |
2 |
|
3 |
> The guy on the mythtv list thought his was OK too until someone else |
4 |
> spotted the error - I'm not saying you cannot read a log file, but y'know |
5 |
> it happens to the best of us :-( |
6 |
|
7 |
Alright, here is my log: |
8 |
|
9 |
ivtv: ==================== START INIT IVTV ==================== |
10 |
ivtv: version 0.7.0 (tagged release) loading |
11 |
ivtv: Linux version: 2.6.17-gentoo-r3 SMP preempt mod_unload PENTIUM4 |
12 |
4KSTACKS gcc-3.4 |
13 |
ivtv: In case of problems please include the debug info between |
14 |
ivtv: the START INIT IVTV and END INIT IVTV lines, along with |
15 |
ivtv: any module options, when mailing the ivtv-users mailinglist. |
16 |
intel8x0_measure_ac97_clock: measured 50865 usecs |
17 |
intel8x0: clocking to 48000 |
18 |
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based) |
19 |
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 209 |
20 |
ivtv0: Unreasonably low latency timer, setting to 64 (was 32) |
21 |
tveeprom 1-0050: The eeprom says no radio is present, but the tuner type |
22 |
tveeprom 1-0050: indicates otherwise. I will assume that radio is present. |
23 |
tveeprom 1-0050: Hauppauge model 26039, rev C1A5, serial# 8499471 |
24 |
tveeprom 1-0050: tuner model is TCL MPE05-2 (idx 105, type 38) |
25 |
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom |
26 |
0x74) |
27 |
tveeprom 1-0050: audio processor is CX25842 (idx 36) |
28 |
tveeprom 1-0050: decoder processor is CX25842 (idx 29) |
29 |
tveeprom 1-0050: has radio, has IR remote |
30 |
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) |
31 |
tda9887 1-0043: chip found @ 0x86 (ivtv i2c driver #0) |
32 |
cx25840 1-0044: cx25842-23 found @ 0x88 (ivtv i2c driver #0) |
33 |
cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) |
34 |
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) |
35 |
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) |
36 |
ivtv0: Encoder revision: 0x02050032 |
37 |
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) |
38 |
ivtv0: Allocate DMA encoder YUV stream: 161 x 12960 buffers (2048KB total) |
39 |
ivtv0: Allocate DMA encoder VBI stream: 80 x 26208 buffers (2048KB total) |
40 |
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB |
41 |
total) |
42 |
ivtv0: Create encoder radio stream |
43 |
tuner 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) |
44 |
ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 |
45 |
ivtv: ==================== END INIT IVTV ==================== |
46 |
|
47 |
> |
48 |
> As far as i recall you have been trying so far with composite/line in. Is |
49 |
> it worth trying the tuner? |
50 |
|
51 |
Well, I am not interested in watching TV. Even if the tuner works that doesn't |
52 |
necessarily mean that the hardware dealing with composite and Line IN is |
53 |
working properly. |
54 |
|
55 |
I may give it a try later but I don't even have an arial because I never watch |
56 |
TV. ;-) |
57 |
|
58 |
> |
59 |
> What sort of input does your line-in have? Mine is two RCA plugs, but I |
60 |
> have heard of them having the 2.5mm stereo plugs too (like a headphone |
61 |
> socket on a walkman). If so, make sure the plug is the right one. |
62 |
|
63 |
The latter one - and yes, I think the plug is right. |
64 |
|
65 |
> |
66 |
> Not sure where else to go from here, except back to the vendor. |
67 |
|
68 |
My feeling meanwhile. :-( |
69 |
|
70 |
> |
71 |
> > -- |
72 |
> > Mark Twain: I rather decline two drinks than a German adjective. |
73 |
> |
74 |
> I love that quote! |
75 |
|
76 |
When I read it, I almost instantaneously fell in love with it. ;-) |
77 |
|
78 |
Uwe |
79 |
|
80 |
-- |
81 |
Mark Twain: I rather decline two drinks than a German adjective. |
82 |
http://www.SysEx.com.na |
83 |
-- |
84 |
gentoo-user@g.o mailing list |