| 1 |
Hmm. |
| 2 |
|
| 3 |
I have servers using the SuperMicro P8SCT motherboard, which supports hot-pluggable SATA drives. |
| 4 |
|
| 5 |
In Gentoo they show as being SCSI, fine, no problem with that. |
| 6 |
|
| 7 |
If I hotplug a drive into the chassis--it powers up, but Gentoo doesn't see it until reboot. |
| 8 |
|
| 9 |
Has anyone else used hotpluggable SATA drives in Gentoo 2006.0? Is there some mysterious package I need to emerge for this to work right? |
| 10 |
|
| 11 |
Output of dmesg follows. |
| 12 |
|
| 13 |
Thanks in advance, |
| 14 |
Best, |
| 15 |
--Glenn |
| 16 |
|
| 17 |
Linux version 2.6.15-gentoo-r5 (root@gravity) (gcc version 3.4.4 (Gentoo 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 SMP Mon Feb 13 20:23:47 UTC 2006 |
| 18 |
BIOS-provided physical RAM map: |
| 19 |
BIOS-e820: 0000000000000000 - 000000000009f400 (usable) |
| 20 |
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) |
| 21 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 22 |
BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) |
| 23 |
BIOS-e820: 000000007f6e0000 - 000000007f6e3000 (ACPI NVS) |
| 24 |
BIOS-e820: 000000007f6e3000 - 000000007f6f0000 (ACPI data) |
| 25 |
BIOS-e820: 000000007f6f0000 - 000000007f700000 (reserved) |
| 26 |
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) |
| 27 |
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) |
| 28 |
1142MB HIGHMEM available. |
| 29 |
896MB LOWMEM available. |
| 30 |
found SMP MP-table at 000f3a60 |
| 31 |
On node 0 totalpages: 521952 |
| 32 |
DMA zone: 4096 pages, LIFO batch:0 |
| 33 |
DMA32 zone: 0 pages, LIFO batch:0 |
| 34 |
Normal zone: 225280 pages, LIFO batch:31 |
| 35 |
HighMem zone: 292576 pages, LIFO batch:31 |
| 36 |
DMI 2.3 present. |
| 37 |
ACPI: RSDP (v000 IntelR ) @ 0x000f7bc0 |
| 38 |
ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e3040 |
| 39 |
ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e30c0 |
| 40 |
ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e7540 |
| 41 |
ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f6e7440 |
| 42 |
ACPI: SSDT (v001 PmRef Cpu0Ist 0x00003000 INTL 0x20041203) @ 0x7f6e75c0 |
| 43 |
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20041203) @ 0x7f6e7a50 |
| 44 |
ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 |
| 45 |
ACPI: Local APIC address 0xfee00000 |
| 46 |
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 47 |
Processor #0 15:4 APIC version 20 |
| 48 |
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 49 |
Processor #1 15:4 APIC version 20 |
| 50 |
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) |
| 51 |
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) |
| 52 |
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 53 |
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| 54 |
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| 55 |
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| 56 |
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) |
| 57 |
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 |
| 58 |
ACPI: IOAPIC (id[0x05] address[0xfec84400] gsi_base[24]) |
| 59 |
IOAPIC[1]: apic_id 5, version 32, address 0xfec84400, GSI 24-47 |
| 60 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 61 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 62 |
ACPI: IRQ0 used by override. |
| 63 |
ACPI: IRQ2 used by override. |
| 64 |
ACPI: IRQ9 used by override. |
| 65 |
Enabling APIC mode: Flat. Using 2 I/O APICs |
| 66 |
Using ACPI (MADT) for SMP configuration information |
| 67 |
Allocating PCI resources starting at 80000000 (gap: 7f700000:60900000) |
| 68 |
Built 1 zonelists |
| 69 |
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda3 |
| 70 |
mapped APIC to ffffd000 (fee00000) |
| 71 |
mapped IOAPIC to ffffc000 (fec00000) |
| 72 |
mapped IOAPIC to ffffb000 (fec84400) |
| 73 |
Initializing CPU#0 |
| 74 |
CPU 0 irqstacks, hard=c0427000 soft=c041f000 |
| 75 |
PID hash table entries: 4096 (order: 12, 65536 bytes) |
| 76 |
Detected 3400.303 MHz processor. |
| 77 |
Using tsc for high-res timesource |
| 78 |
Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized |
| 79 |
Console: colour VGA+ 80x25 |
| 80 |
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) |
| 81 |
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) |
| 82 |
Memory: 2061544k/2087808k available (2388k kernel code, 24896k reserved, 561k data, 220k init, 1170304k highmem) |
| 83 |
Checking if this processor honours the WP bit even in supervisor mode... Ok. |
| 84 |
Calibrating delay using timer specific routine.. 6808.63 BogoMIPS (lpj=34043180) |
| 85 |
Mount-cache hash table entries: 512 |
| 86 |
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 |
| 87 |
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 |
| 88 |
monitor/mwait feature present. |
| 89 |
using mwait in idle threads. |
| 90 |
CPU: Trace cache: 12K uops, L1 D cache: 16K |
| 91 |
CPU: L2 cache: 2048K |
| 92 |
CPU: Physical Processor ID: 0 |
| 93 |
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000 |
| 94 |
mtrr: v2.0 (20020519) |
| 95 |
Enabling fast FPU save and restore... done. |
| 96 |
Enabling unmasked SIMD FPU exception support... done. |
| 97 |
Checking 'hlt' instruction... OK. |
| 98 |
CPU0: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 |
| 99 |
Booting processor 1/1 eip 2000 |
| 100 |
CPU 1 irqstacks, hard=c0428000 soft=c0420000 |
| 101 |
Initializing CPU#1 |
| 102 |
Calibrating delay using timer specific routine.. 6800.40 BogoMIPS (lpj=34002005) |
| 103 |
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 |
| 104 |
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000 |
| 105 |
monitor/mwait feature present. |
| 106 |
CPU: Trace cache: 12K uops, L1 D cache: 16K |
| 107 |
CPU: L2 cache: 2048K |
| 108 |
CPU: Physical Processor ID: 0 |
| 109 |
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000080 0000649d 00000000 00000000 |
| 110 |
CPU1: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 |
| 111 |
Total of 2 processors activated (13609.03 BogoMIPS). |
| 112 |
ENABLING IO-APIC IRQs |
| 113 |
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 114 |
checking TSC synchronization across 2 CPUs: passed. |
| 115 |
Brought up 2 CPUs |
| 116 |
checking if image is initramfs... it is |
| 117 |
Freeing initrd memory: 3941k freed |
| 118 |
NET: Registered protocol family 16 |
| 119 |
EISA bus registered |
| 120 |
ACPI: bus type pci registered |
| 121 |
PCI: PCI BIOS revision 3.00 entry at 0xfa030, last bus=5 |
| 122 |
PCI: Using MMCONFIG |
| 123 |
ACPI: Subsystem revision 20050902 |
| 124 |
ACPI: Interpreter enabled |
| 125 |
ACPI: Using IOAPIC for interrupt routing |
| 126 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
| 127 |
PCI: Probing PCI hardware (bus 00) |
| 128 |
Boot video device is 0000:00:02.0 |
| 129 |
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 |
| 130 |
PCI: PXH quirk detected, disabling MSI for SHPC device |
| 131 |
PCI: Transparent bridge - 0000:00:1e.0 |
| 132 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 133 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] |
| 134 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] |
| 135 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] |
| 136 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P1AB.PXHA._PRT] |
| 137 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 12 14 15) |
| 138 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *12 14 15) |
| 139 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 12 14 15) |
| 140 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15) |
| 141 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. |
| 142 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. |
| 143 |
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled. |
| 144 |
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15) |
| 145 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
| 146 |
pnp: PnP ACPI init |
| 147 |
pnp: PnP ACPI: found 13 devices |
| 148 |
SCSI subsystem initialized |
| 149 |
PCI: Using ACPI for IRQ routing |
| 150 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report |
| 151 |
pnp: 00:09: ioport range 0x400-0x4bf could not be reserved |
| 152 |
PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 |
| 153 |
PCI: Bridge: 0000:01:00.0 |
| 154 |
IO window: disabled. |
| 155 |
MEM window: disabled. |
| 156 |
PREFETCH window: disabled. |
| 157 |
PCI: Bridge: 0000:00:01.0 |
| 158 |
IO window: disabled. |
| 159 |
MEM window: d0000000-d00fffff |
| 160 |
PREFETCH window: disabled. |
| 161 |
PCI: Bridge: 0000:00:1c.0 |
| 162 |
IO window: disabled. |
| 163 |
MEM window: d0100000-d01fffff |
| 164 |
PREFETCH window: disabled. |
| 165 |
PCI: Bridge: 0000:00:1c.1 |
| 166 |
IO window: disabled. |
| 167 |
MEM window: d0200000-d02fffff |
| 168 |
PREFETCH window: disabled. |
| 169 |
PCI: Bridge: 0000:00:1e.0 |
| 170 |
IO window: disabled. |
| 171 |
MEM window: disabled. |
| 172 |
PREFETCH window: disabled. |
| 173 |
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 |
| 174 |
PCI: Setting latency timer of device 0000:00:01.0 to 64 |
| 175 |
PCI: Setting latency timer of device 0000:01:00.0 to 64 |
| 176 |
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 |
| 177 |
PCI: Setting latency timer of device 0000:00:1c.0 to 64 |
| 178 |
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 |
| 179 |
PCI: Setting latency timer of device 0000:00:1c.1 to 64 |
| 180 |
PCI: Setting latency timer of device 0000:00:1e.0 to 64 |
| 181 |
audit: initializing netlink socket (disabled) |
| 182 |
audit(1144679805.580:1): initialized |
| 183 |
highmem bounce pool size: 64 pages |
| 184 |
Squashfs 2.2 (released 2005/07/03) (C) 2002-2005 Phillip Lougher |
| 185 |
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled |
| 186 |
SGI XFS Quota Management subsystem |
| 187 |
Initializing Cryptographic API |
| 188 |
io scheduler noop registered |
| 189 |
io scheduler anticipatory registered |
| 190 |
io scheduler deadline registered |
| 191 |
io scheduler cfq registered |
| 192 |
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 |
| 193 |
PCI: Setting latency timer of device 0000:00:01.0 to 64 |
| 194 |
assign_interrupt_mode Found MSI capability |
| 195 |
Allocate Port Service[pcie00] |
| 196 |
Allocate Port Service[pcie03] |
| 197 |
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 |
| 198 |
PCI: Setting latency timer of device 0000:00:1c.0 to 64 |
| 199 |
assign_interrupt_mode Found MSI capability |
| 200 |
Allocate Port Service[pcie00] |
| 201 |
Allocate Port Service[pcie02] |
| 202 |
Allocate Port Service[pcie03] |
| 203 |
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 |
| 204 |
PCI: Setting latency timer of device 0000:00:1c.1 to 64 |
| 205 |
assign_interrupt_mode Found MSI capability |
| 206 |
Allocate Port Service[pcie00] |
| 207 |
Allocate Port Service[pcie02] |
| 208 |
Allocate Port Service[pcie03] |
| 209 |
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) |
| 210 |
isapnp: Scanning for PnP cards... |
| 211 |
isapnp: No Plug & Play device found |
| 212 |
PNP: No PS/2 controller found. Probing ports directly. |
| 213 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 214 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 215 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
| 216 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 217 |
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
| 218 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A |
| 219 |
serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A |
| 220 |
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 221 |
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A |
| 222 |
mice: PS/2 mouse device common for all mice |
| 223 |
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
| 224 |
loop: loaded (max 8 devices) |
| 225 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 226 |
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx |
| 227 |
ide0: I/O resource 0x1F0-0x1F7 not free. |
| 228 |
ide0: ports already in use, skipping probe |
| 229 |
Probing IDE interface ide1... |
| 230 |
hdd: LITE-ON DVD SOHD-16P9S, ATAPI CD/DVD-ROM drive |
| 231 |
ide1 at 0x170-0x177,0x376 on irq 15 |
| 232 |
hdd: ATAPI 48X DVD-ROM drive, 254kB Cache |
| 233 |
Uniform CD-ROM driver Revision: 3.20 |
| 234 |
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 |
| 235 |
md: bitmap version 4.39 |
| 236 |
EISA: Probing bus 0 at eisa.0 |
| 237 |
EISA: Detected 0 cards. |
| 238 |
NET: Registered protocol family 2 |
| 239 |
IP route cache hash table entries: 65536 (order: 6, 262144 bytes) |
| 240 |
TCP established hash table entries: 262144 (order: 9, 2097152 bytes) |
| 241 |
TCP bind hash table entries: 65536 (order: 7, 524288 bytes) |
| 242 |
TCP: Hash tables configured (established 262144 bind 65536) |
| 243 |
TCP reno registered |
| 244 |
TCP bic registered |
| 245 |
NET: Registered protocol family 1 |
| 246 |
NET: Registered protocol family 17 |
| 247 |
Starting balanced_irq |
| 248 |
Using IPI Shortcut mode |
| 249 |
Freeing unused kernel memory: 220k freed |
| 250 |
usbcore: registered new driver usbfs |
| 251 |
usbcore: registered new driver hub |
| 252 |
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 |
| 253 |
PCI: Setting latency timer of device 0000:00:1d.7 to 64 |
| 254 |
ehci_hcd 0000:00:1d.7: EHCI Host Controller |
| 255 |
PCI: cache line size of 128 is not supported by device 0000:00:1d.7 |
| 256 |
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 |
| 257 |
ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd03c0000 |
| 258 |
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 |
| 259 |
hub 1-0:1.0: USB hub found |
| 260 |
hub 1-0:1.0: 8 ports detected |
| 261 |
usbcore: registered new driver hiddev |
| 262 |
usbcore: registered new driver usbhid |
| 263 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
| 264 |
Initializing USB Mass Storage driver... |
| 265 |
usbcore: registered new driver usb-storage |
| 266 |
USB Mass Storage support registered. |
| 267 |
USB Universal Host Controller Interface driver v2.3 |
| 268 |
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 |
| 269 |
PCI: Setting latency timer of device 0000:00:1d.0 to 64 |
| 270 |
uhci_hcd 0000:00:1d.0: UHCI Host Controller |
| 271 |
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| 272 |
uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e100 |
| 273 |
hub 2-0:1.0: USB hub found |
| 274 |
hub 2-0:1.0: 2 ports detected |
| 275 |
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 |
| 276 |
PCI: Setting latency timer of device 0000:00:1d.1 to 64 |
| 277 |
uhci_hcd 0000:00:1d.1: UHCI Host Controller |
| 278 |
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 |
| 279 |
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200 |
| 280 |
hub 3-0:1.0: USB hub found |
| 281 |
hub 3-0:1.0: 2 ports detected |
| 282 |
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 |
| 283 |
PCI: Setting latency timer of device 0000:00:1d.2 to 64 |
| 284 |
uhci_hcd 0000:00:1d.2: UHCI Host Controller |
| 285 |
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 |
| 286 |
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e300 |
| 287 |
hub 4-0:1.0: USB hub found |
| 288 |
hub 4-0:1.0: 2 ports detected |
| 289 |
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 |
| 290 |
PCI: Setting latency timer of device 0000:00:1d.3 to 64 |
| 291 |
uhci_hcd 0000:00:1d.3: UHCI Host Controller |
| 292 |
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 |
| 293 |
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400 |
| 294 |
hub 5-0:1.0: USB hub found |
| 295 |
hub 5-0:1.0: 2 ports detected |
| 296 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) |
| 297 |
sl811: driver sl811-hcd, 19 May 2005 |
| 298 |
ieee1394: Initialized config rom entry `ip1394' |
| 299 |
sbp2: $Rev: 1306 $ Ben Collins <bcollins@××××××.org> |
| 300 |
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) |
| 301 |
ieee1394: sbp2: Try serialize_io=0 for better performance |
| 302 |
libata version 1.20 loaded. |
| 303 |
ahci 0000:00:1f.2: version 1.2 |
| 304 |
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 |
| 305 |
ACPI: PCI interrupt for device 0000:00:1f.2 disabled |
| 306 |
ahci: probe of 0000:00:1f.2 failed with error -12 |
| 307 |
ata_piix 0000:00:1f.2: version 1.05 |
| 308 |
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 |
| 309 |
ata: 0x170 IDE port busy |
| 310 |
PCI: Setting latency timer of device 0000:00:1f.2 to 64 |
| 311 |
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14 |
| 312 |
ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:207f |
| 313 |
ata1: dev 0 ATA-7, max UDMA/133, 234441648 sectors: LBA48 |
| 314 |
ata1: dev 0 configured for UDMA/133 |
| 315 |
scsi0 : ata_piix |
| 316 |
Vendor: ATA Model: WDC WD1200JS-00M Rev: 02.0 |
| 317 |
Type: Direct-Access ANSI SCSI revision: 05 |
| 318 |
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) |
| 319 |
SCSI device sda: drive cache: write back |
| 320 |
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB) |
| 321 |
SCSI device sda: drive cache: write back |
| 322 |
sda: sda1 sda2 sda3 |
| 323 |
sd 0:0:0:0: Attached scsi disk sda |
| 324 |
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@××××××.com |
| 325 |
ReiserFS: sda3: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda3 |
| 326 |
kjournald starting. Commit interval 5 seconds |
| 327 |
EXT3 FS on sda3, internal journal |
| 328 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 329 |
Adding 1574360k swap on /dev/sda2. Priority:-1 extents:1 across:1574360k |
| 330 |
EXT3 FS on sda3, internal journal |
| 331 |
tg3.c:v3.47 (Dec 28, 2005) |
| 332 |
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 |
| 333 |
PCI: Setting latency timer of device 0000:03:00.0 to 64 |
| 334 |
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:30:48:88:8e:20 |
| 335 |
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] |
| 336 |
eth0: dma_rwctrl[76180000] |
| 337 |
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 |
| 338 |
PCI: Setting latency timer of device 0000:04:00.0 to 64 |
| 339 |
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:30:48:88:8e:21 |
| 340 |
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] |
| 341 |
eth1: dma_rwctrl[76180000] |
| 342 |
Real Time Clock Driver v1.12 |
| 343 |
input: PC Speaker as /class/input/input0 |
| 344 |
FDC 0 is a post-1991 82077 |
| 345 |
parport: PnPBIOS parport detected. |
| 346 |
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] |
| 347 |
tg3: eth0: Link is up at 1000 Mbps, full duplex. |
| 348 |
tg3: eth0: Flow control is on for TX and on for RX. |
| 349 |
|
| 350 |
-- |
| 351 |
Glenn E. Sieb, MTS |
| 352 |
Bell Laboratories |
| 353 |
sieb@××××××.com |
| 354 |
+1 732 949 5453 |
| 355 |
-- |
| 356 |
gentoo-user@g.o mailing list |
Archives