| 1 |
On Thursday 06 June 2013, Mick wrote: |
| 2 |
> On Thursday 06 Jun 2013 12:52:54 Silvio Siefke wrote: |
| 3 |
> > /etc/init.d/net.eth0 start |
| 4 |
> > Bringing up interface eth0 |
| 5 |
> > ERROR: interface eth0 does not exist |
| 6 |
> > Ensure that you have loaded the correct kernel module for your hardware |
| 7 |
> > ERROR: net.eth0 failed to start |
| 8 |
> |
| 9 |
> As has already been mentioned, udev may have used a different naming scheme |
| 10 |
> for your card, so eth0 may not work. |
| 11 |
> |
| 12 |
> > Controller (rev 02) 01:00.0 Ethernet controller: Qualcomm Atheros AR8152 |
| 13 |
> > v1.1 Fast Ethernet (rev c1) |
| 14 |
> |
| 15 |
> I think you need module atl1c for this NIC - but you'll need to google for |
| 16 |
> more info. |
| 17 |
> |
| 18 |
> > 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 |
| 19 |
> |
| 20 |
> [Condor Peak] |
| 21 |
> |
| 22 |
> I think you need module iwlwifi for this card and the correct firmware: |
| 23 |
> |
| 24 |
> http://wireless.kernel.org/en/users/Drivers/iwlwifi |
| 25 |
|
| 26 |
There is a very useful site to identify drivers: http://kmuto.jp/debian/hcl/. |
| 27 |
Just paste in the output of "lspci -n" and it does the rest! |
| 28 |
|
| 29 |
HTH |
| 30 |
-Robin |
| 31 |
|
| 32 |
-- |
| 33 |
---------------------------------------------------------------------- |
| 34 |
Robin Atwood. |
| 35 |
|
| 36 |
"Ship me somewheres east of Suez, where the best is like the worst, |
| 37 |
Where there ain't no Ten Commandments an' a man can raise a thirst" |
| 38 |
from "Mandalay" by Rudyard Kipling |
| 39 |
---------------------------------------------------------------------- |
Archives