| 1 |
Joerg Schilling wrote: |
| 2 |
> Dale<rdalek1967@×××××.com> wrote: |
| 3 |
> |
| 4 |
> |
| 5 |
>> Used versions |
| 6 |
>> ----------------------- |
| 7 |
>> cdrecord: 2.1.1a77 |
| 8 |
>> |
| 9 |
>> cdrecord |
| 10 |
>> ----------------------- |
| 11 |
>> scsidev: '/dev/hdd' |
| 12 |
>> devname: '/dev/hdd' |
| 13 |
>> scsibus: -2 target: -2 lun: -2 |
| 14 |
>> Warning: Open by 'devname' is unintentional and not supported. |
| 15 |
>> Linux sg driver version: 3.5.27 |
| 16 |
>> SCSI buffer size: 64512 |
| 17 |
>> /usr/bin/cdrecord: Warning: Cannot read drive buffer. |
| 18 |
>> /usr/bin/cdrecord: Warning: The DMA speed test has been skipped. |
| 19 |
>> Cdrecord-ProDVD-ProBD-Clone 2.01.01a77 (i686-pc-linux-gnu) Copyright (C) |
| 20 |
>> 1995-2010 JÃ?rg Schilling |
| 21 |
>> TOC Type: 1 = CD-ROM |
| 22 |
>> Using libscg version 'schily-0.9'. |
| 23 |
>> Driveropts: 'burnfree' |
| 24 |
>> atapi: 1 |
| 25 |
>> Device type : Removable CD-ROM |
| 26 |
>> Version : 0 |
| 27 |
>> Response Format: 2 |
| 28 |
>> Capabilities : |
| 29 |
>> Vendor_info : 'Optiarc ' |
| 30 |
>> Identifikation : 'DVD RW AD-7200A ' |
| 31 |
>> Revision : '1.05' |
| 32 |
>> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. |
| 33 |
>> Current: DVD+RW |
| 34 |
>> Profile: DVD+R/DL |
| 35 |
>> Profile: DVD+R |
| 36 |
>> Profile: DVD+RW (current) |
| 37 |
>> Profile: DVD-R/DL layer jump recording |
| 38 |
>> Profile: DVD-R/DL sequential recording |
| 39 |
>> Profile: DVD-RW sequential recording |
| 40 |
>> Profile: DVD-RW restricted overwrite |
| 41 |
>> Profile: DVD-RAM |
| 42 |
>> Profile: DVD-R sequential recording |
| 43 |
>> Profile: DVD-ROM |
| 44 |
>> Profile: CD-RW |
| 45 |
>> Profile: CD-R |
| 46 |
>> Profile: CD-ROM |
| 47 |
>> Profile: Removable Disk |
| 48 |
>> Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw). |
| 49 |
>> Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE |
| 50 |
>> Supported modes: PACKET SAO LAYER_JUMP |
| 51 |
>> Drive buf size : 1245184 = 1216 KB |
| 52 |
>> FIFO size : 4194304 = 4096 KB |
| 53 |
>> Track 01: data 2591 MB |
| 54 |
>> Total size: 2591 MB = 1326592 sectors |
| 55 |
>> Current Secsize: 2048 |
| 56 |
>> Trying to clear drive status. |
| 57 |
>> Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 968512 |
| 58 |
>> Reducing transfer size from 64512 to 32768 bytes. |
| 59 |
>> Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. |
| 60 |
>> Last chance to quit, starting real write in 3 seconds. |
| 61 |
>> 2 seconds. |
| 62 |
>> 1 seconds. |
| 63 |
>> 0 seconds. Operation starts. |
| 64 |
>> Waiting for reader process to fill input buffer ... input buffer ready. |
| 65 |
>> Starting new track at sector: 0 |
| 66 |
>> Track 02: 0 of 2591 MB written. |
| 67 |
>> /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error |
| 68 |
>> CDB: 2A 00 00 00 00 00 00 00 10 00 |
| 69 |
>> status: 0x2 (CHECK CONDITION) |
| 70 |
>> Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 |
| 71 |
>> Sense Key: 0x3 Medium Error, Segment 0 |
| 72 |
>> Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 |
| 73 |
>> Sense flags: Blk 0 (not valid) |
| 74 |
>> resid: 32768 |
| 75 |
>> cmd finished after 17.339s timeout 200s |
| 76 |
>> /usr/bin/cdrecord: A write error occured. |
| 77 |
>> /usr/bin/cdrecord: Please properly read the error message above. |
| 78 |
>> write track data: error after 0 bytes |
| 79 |
>> Writing time: 22.358s |
| 80 |
>> Average write speed 87.7x. |
| 81 |
>> Fixating... |
| 82 |
>> Fixating time: 0.003s |
| 83 |
>> /usr/bin/cdrecord: fifo had 128 puts and 1 gets. |
| 84 |
>> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was |
| 85 |
>> 100%. |
| 86 |
>> BURN-Free was not used. |
| 87 |
>> |
| 88 |
> Now we have an error message but there is no information on the media. |
| 89 |
> |
| 90 |
> Please run "cdrecord -atip" with the failing medium. |
| 91 |
> |
| 92 |
> DVD+RW is a medium with well known deficits in drive media compatibility and |
| 93 |
> there is also low quality media. |
| 94 |
> |
| 95 |
> As nothing has been written, your problem youd be a result of a drive media |
| 96 |
> compatibility problem. This may be a result from writing the media with a |
| 97 |
> different drive before. You may try to call "cdrecord -v -force -format" in |
| 98 |
> order to reformat the medium before writing to it. |
| 99 |
> |
| 100 |
> Note that the mein difference between DVD- (the standard) and DVD+ |
| 101 |
> (a Philips/Sony vendor specific system) is that the DVD Forum frequently runs |
| 102 |
> round robin tests for drive media compatibility. The tests are run in a way that |
| 103 |
> every media is written with every writer and read with every reader. |
| 104 |
> |
| 105 |
> |
| 106 |
> Jörg |
| 107 |
> |
| 108 |
> |
| 109 |
|
| 110 |
After downgrading to a stable cdrtools, I don't have any failing media. |
| 111 |
I have been using the same drive and media for quite a while tho. I |
| 112 |
think I had the drive for a year or so and the media for about the same |
| 113 |
time. I re-use the media since it is RW. Actually, I bought the media |
| 114 |
when I bought the drive. I got them from newegg of course. |
| 115 |
|
| 116 |
Dale |
| 117 |
|
| 118 |
:-) :-) |
Archives