| 1 |
Dale <rdalek1967@×××××.com> wrote: |
| 2 |
|
| 3 |
> Used versions |
| 4 |
> ----------------------- |
| 5 |
> cdrecord: 2.1.1a77 |
| 6 |
> |
| 7 |
> cdrecord |
| 8 |
> ----------------------- |
| 9 |
> scsidev: '/dev/hdd' |
| 10 |
> devname: '/dev/hdd' |
| 11 |
> scsibus: -2 target: -2 lun: -2 |
| 12 |
> Warning: Open by 'devname' is unintentional and not supported. |
| 13 |
> Linux sg driver version: 3.5.27 |
| 14 |
> SCSI buffer size: 64512 |
| 15 |
> /usr/bin/cdrecord: Warning: Cannot read drive buffer. |
| 16 |
> /usr/bin/cdrecord: Warning: The DMA speed test has been skipped. |
| 17 |
> Cdrecord-ProDVD-ProBD-Clone 2.01.01a77 (i686-pc-linux-gnu) Copyright (C) |
| 18 |
> 1995-2010 JÃ?rg Schilling |
| 19 |
> TOC Type: 1 = CD-ROM |
| 20 |
> Using libscg version 'schily-0.9'. |
| 21 |
> Driveropts: 'burnfree' |
| 22 |
> atapi: 1 |
| 23 |
> Device type : Removable CD-ROM |
| 24 |
> Version : 0 |
| 25 |
> Response Format: 2 |
| 26 |
> Capabilities : |
| 27 |
> Vendor_info : 'Optiarc ' |
| 28 |
> Identifikation : 'DVD RW AD-7200A ' |
| 29 |
> Revision : '1.05' |
| 30 |
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. |
| 31 |
> Current: DVD+RW |
| 32 |
> Profile: DVD+R/DL |
| 33 |
> Profile: DVD+R |
| 34 |
> Profile: DVD+RW (current) |
| 35 |
> Profile: DVD-R/DL layer jump recording |
| 36 |
> Profile: DVD-R/DL sequential recording |
| 37 |
> Profile: DVD-RW sequential recording |
| 38 |
> Profile: DVD-RW restricted overwrite |
| 39 |
> Profile: DVD-RAM |
| 40 |
> Profile: DVD-R sequential recording |
| 41 |
> Profile: DVD-ROM |
| 42 |
> Profile: CD-RW |
| 43 |
> Profile: CD-R |
| 44 |
> Profile: CD-ROM |
| 45 |
> Profile: Removable Disk |
| 46 |
> Using generic SCSI-3/mmc-3 DVD+RW driver (mmc_dvdplusrw). |
| 47 |
> Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE |
| 48 |
> Supported modes: PACKET SAO LAYER_JUMP |
| 49 |
> Drive buf size : 1245184 = 1216 KB |
| 50 |
> FIFO size : 4194304 = 4096 KB |
| 51 |
> Track 01: data 2591 MB |
| 52 |
> Total size: 2591 MB = 1326592 sectors |
| 53 |
> Current Secsize: 2048 |
| 54 |
> Trying to clear drive status. |
| 55 |
> Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 968512 |
| 56 |
> Reducing transfer size from 64512 to 32768 bytes. |
| 57 |
> Starting to write CD/DVD/BD at speed 4 in real SAO mode for single session. |
| 58 |
> Last chance to quit, starting real write in 3 seconds. |
| 59 |
> 2 seconds. |
| 60 |
> 1 seconds. |
| 61 |
> 0 seconds. Operation starts. |
| 62 |
> Waiting for reader process to fill input buffer ... input buffer ready. |
| 63 |
> Starting new track at sector: 0 |
| 64 |
> Track 02: 0 of 2591 MB written. |
| 65 |
> /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error |
| 66 |
> CDB: 2A 00 00 00 00 00 00 00 10 00 |
| 67 |
> status: 0x2 (CHECK CONDITION) |
| 68 |
> Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 |
| 69 |
> Sense Key: 0x3 Medium Error, Segment 0 |
| 70 |
> Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 |
| 71 |
> Sense flags: Blk 0 (not valid) |
| 72 |
> resid: 32768 |
| 73 |
> cmd finished after 17.339s timeout 200s |
| 74 |
> /usr/bin/cdrecord: A write error occured. |
| 75 |
> /usr/bin/cdrecord: Please properly read the error message above. |
| 76 |
> write track data: error after 0 bytes |
| 77 |
> Writing time: 22.358s |
| 78 |
> Average write speed 87.7x. |
| 79 |
> Fixating... |
| 80 |
> Fixating time: 0.003s |
| 81 |
> /usr/bin/cdrecord: fifo had 128 puts and 1 gets. |
| 82 |
> /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was |
| 83 |
> 100%. |
| 84 |
> BURN-Free was not used. |
| 85 |
|
| 86 |
Now we have an error message but there is no information on the media. |
| 87 |
|
| 88 |
Please run "cdrecord -atip" with the failing medium. |
| 89 |
|
| 90 |
DVD+RW is a medium with well known deficits in drive media compatibility and |
| 91 |
there is also low quality media. |
| 92 |
|
| 93 |
As nothing has been written, your problem youd be a result of a drive media |
| 94 |
compatibility problem. This may be a result from writing the media with a |
| 95 |
different drive before. You may try to call "cdrecord -v -force -format" in |
| 96 |
order to reformat the medium before writing to it. |
| 97 |
|
| 98 |
Note that the mein difference between DVD- (the standard) and DVD+ |
| 99 |
(a Philips/Sony vendor specific system) is that the DVD Forum frequently runs |
| 100 |
round robin tests for drive media compatibility. The tests are run in a way that |
| 101 |
every media is written with every writer and read with every reader. |
| 102 |
|
| 103 |
|
| 104 |
Jörg |
| 105 |
|
| 106 |
-- |
| 107 |
EMail:joerg@××××××××××××××××××××××××.de (home) Jörg Schilling D-13353 Berlin |
| 108 |
js@××××××××××××.de (uni) |
| 109 |
joerg.schilling@××××××××××××××××.de (work) Blog: http://schily.blogspot.com/ |
| 110 |
URL: http://cdrecord.berlios.de/private/ ftp://ftp.berlios.de/pub/schily |
Archives