| 1 |
On Sunday 04 May 2014 20:52:13 J. Roeleveld wrote: |
| 2 |
> On Tuesday, April 29, 2014 01:47:08 AM Peter Humphrey wrote: |
| 3 |
> I thought the man-page for badblocks (it's a seperate utility) actually says |
| 4 |
> it should be run on the physical disks? |
| 5 |
|
| 6 |
Could well do so - I stopped reading when I came to this: |
| 7 |
|
| 8 |
"... it is strongly recommended that users not run badblocks directly, |
| 9 |
but rather use the -c option of the e2fsck and mke2fs programs." |
| 10 |
|
| 11 |
:-) |
| 12 |
|
| 13 |
> > On Monday 28 Apr 2014 13:32:05 I wrote: |
| 14 |
|
| 15 |
> > Perhaps I should find a different slot for the Quadro FX580 |
| 16 |
> > card, to separate it from the usb interface. |
| 17 |
> |
| 18 |
> Always a good idea, if possible. |
| 19 |
> USB and Video are both heavily used items. |
| 20 |
|
| 21 |
Yes, you're right. I'll see what I can arrange. It must be time to get the |
| 22 |
duster out too. Also, this morning I see this in dmesg: |
| 23 |
|
| 24 |
[66770.347672] nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - ch 4 |
| 25 |
[kwin[6587]] get 0x002007524c put 0x0020075704 ib_get 0x00000068 ib_put |
| 26 |
0x00000072 state 0x8000753c (err: INVALID_CMD) push 0x00406040 |
| 27 |
[66770.347697] nouveau E[ PFIFO][0000:01:00.0] DMA_PUSHER - ch 4 |
| 28 |
[kwin[6587]] get 0x002037c000 put 0x002037c054 ib_get 0x00000069 ib_put |
| 29 |
0x00000073 state 0x80000000 (err: INVALID_CMD) push 0x00406040 |
| 30 |
|
| 31 |
> USB-mouse, keyboard,harddrive,flash-stick,.... ? |
| 32 |
> Eg. anything plugged into USB can cause interrupts. |
| 33 |
|
| 34 |
No USB mouse or keyboard here; still using PS/2. I usually have a memory stick |
| 35 |
plugged in but I removed it during the investigation. The external USB disk |
| 36 |
will have been powered up for some of the time. |
| 37 |
|
| 38 |
> Also, some mainboards have additional items pre-connected to the USB-bus. |
| 39 |
|
| 40 |
Time to stick my head into the nVidia docs... |
| 41 |
|
| 42 |
-- |
| 43 |
Regards |
| 44 |
Peter |
Archives