| 1 |
Hey everybody! |
| 2 |
|
| 3 |
I've upgraded to kernel 2.6.19 (gentoo sources) a few days ago however I |
| 4 |
can't get my DVD Drive working correctly. |
| 5 |
|
| 6 |
I got an Dell Inspiron 9400 Royal. lspci tells me that I have an *ICH7* |
| 7 |
Chipset [00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 |
| 8 |
Family) Serial ATA Storage Controller IDE (rev 01)] |
| 9 |
|
| 10 |
Here is all my relevant kernel configuration: |
| 11 |
|
| 12 |
*Serial ATA (prod) and Parallel ATA (experimental) drivers* |
| 13 |
<*> ATA device support |
| 14 |
<*> AHCI SATA support |
| 15 |
<*> Intel PIIX/ICH SATA support |
| 16 |
|
| 17 |
*ATA/ATAPI/MFM/RLL support* |
| 18 |
< > ATA/ATAPI/MFM/RLL support |
| 19 |
|
| 20 |
*SCSI device support* |
| 21 |
<*> SCSI disk support |
| 22 |
<*> SCSI CDROM support |
| 23 |
<*> SCSI generic support |
| 24 |
|
| 25 |
*DMA Engine support* |
| 26 |
[*] Support for DMA engines |
| 27 |
[*] Network: TCP receive copy offload |
| 28 |
< > Intel I/OAT DMA support |
| 29 |
|
| 30 |
My SATA DVD Drive is configured as an *UDMA/33* Drive as dmesg | grep |
| 31 |
DMA tells me |
| 32 |
... |
| 33 |
ata2.00: ATAPI, max UDMA/33 |
| 34 |
ata2.00: configured for UDMA/33 |
| 35 |
... |
| 36 |
|
| 37 |
Btw.: It worked perfectly well under openSUSE 10.2 (don't have it |
| 38 |
installed anymore, so I can't check which drivers were used) and gentoo |
| 39 |
kernel 2.6.18-r6 (I also used the ATA_PIIX driver there). |
| 40 |
|
| 41 |
Any hints? |
| 42 |
|
| 43 |
Cheers, |
| 44 |
Jay |
Archives