| 1 |
The sound stopped working on my wife's computer about a week ago. I've |
| 2 |
run every test I can think of and can't seem to track the problem |
| 3 |
down. /etc/init.d/alsasound starts up fine. I can run alsamixer on her |
| 4 |
computer just fine (on my computer, when ALSA isn't working I can't open |
| 5 |
alsamixer); she has the volume control applet running on her panel, but |
| 6 |
there simply is no sound. I looked over dmesg, but didn't notice |
| 7 |
anything out of the ordinary. I'll post it here in case I missed |
| 8 |
something. |
| 9 |
|
| 10 |
catherine ~ # uname -a |
| 11 |
Linux catherine 2.6.16-gentoo-r3 #1 SMP Mon Apr 24 14:24:32 CDT 2006 |
| 12 |
i686 AMD Sempron(tm) 2400+ GNU/Linux |
| 13 |
catherine ~ # dmesg |
| 14 |
Linux version 2.6.16-gentoo-r3 (root@catherine) (gcc version 3.4.5 |
| 15 |
(Gentoo 3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) #1 SMP Mon Apr 24 14:24:32 |
| 16 |
CDT 2006 |
| 17 |
BIOS-provided physical RAM map: |
| 18 |
BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
| 19 |
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
| 20 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
| 21 |
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) |
| 22 |
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) |
| 23 |
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) |
| 24 |
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
| 25 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
| 26 |
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
| 27 |
0MB HIGHMEM available. |
| 28 |
223MB LOWMEM available. |
| 29 |
found SMP MP-table at 000f57a0 |
| 30 |
On node 0 totalpages: 57328 |
| 31 |
DMA zone: 4096 pages, LIFO batch:0 |
| 32 |
DMA32 zone: 0 pages, LIFO batch:0 |
| 33 |
Normal zone: 53232 pages, LIFO batch:15 |
| 34 |
HighMem zone: 0 pages, LIFO batch:0 |
| 35 |
DMI 2.2 present. |
| 36 |
ACPI: RSDP (v000 AWARD ) @ 0x000f7170 |
| 37 |
ACPI: RSDT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
| 38 |
0x0dff3000 |
| 39 |
ACPI: FADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
| 40 |
0x0dff3040 |
| 41 |
ACPI: MADT (v001 AWARD AWRDACPI 0x42302e31 AWRD 0x00000000) @ |
| 42 |
0x0dff69c0 |
| 43 |
ACPI: DSDT (v001 AWARD AWRDACPI 0x00001000 MSFT 0x0100000e) @ |
| 44 |
0x00000000 |
| 45 |
ACPI: Local APIC address 0xfee00000 |
| 46 |
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 47 |
Processor #0 6:8 APIC version 16 |
| 48 |
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 49 |
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 50 |
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 |
| 51 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 52 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) |
| 53 |
ACPI: IRQ0 used by override. |
| 54 |
ACPI: IRQ2 used by override. |
| 55 |
ACPI: IRQ9 used by override. |
| 56 |
Enabling APIC mode: Flat. Using 1 I/O APICs |
| 57 |
Using ACPI (MADT) for SMP configuration information |
| 58 |
Allocating PCI resources starting at 10000000 (gap: 0e000000:f0c00000) |
| 59 |
Built 1 zonelists |
| 60 |
Kernel command line: real_root=/dev/hdc6 |
| 61 |
mapped APIC to ffffd000 (fee00000) |
| 62 |
mapped IOAPIC to ffffc000 (fec00000) |
| 63 |
Enabling fast FPU save and restore... done. |
| 64 |
Enabling unmasked SIMD FPU exception support... done. |
| 65 |
Initializing CPU#0 |
| 66 |
PID hash table entries: 1024 (order: 10, 16384 bytes) |
| 67 |
Detected 1662.748 MHz processor. |
| 68 |
Using tsc for high-res timesource |
| 69 |
Speakup v-2.00 CVS: Wed Dec 21 14:36:03 EST 2005 : initialized |
| 70 |
Console: colour VGA+ 80x25 |
| 71 |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
| 72 |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
| 73 |
Memory: 221288k/229312k available (2318k kernel code, 7516k reserved, |
| 74 |
567k data, 192k init, 0k highmem) |
| 75 |
Checking if this processor honours the WP bit even in supervisor mode... |
| 76 |
Ok. |
| 77 |
Calibrating delay using timer specific routine.. 3329.12 BogoMIPS |
| 78 |
(lpj=6658248) |
| 79 |
Mount-cache hash table entries: 512 |
| 80 |
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 |
| 81 |
00000000 00000000 00000000 |
| 82 |
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 |
| 83 |
00000000 00000000 00000000 |
| 84 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
| 85 |
CPU: L2 Cache: 256K (64 bytes/line) |
| 86 |
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000420 00000000 |
| 87 |
00000000 00000000Checking 'hlt' instruction... OK. |
| 88 |
CPU0: AMD Sempron(tm) 2400+ stepping 01 |
| 89 |
Total of 1 processors activated (3329.12 BogoMIPS). |
| 90 |
ENABLING IO-APIC IRQs |
| 91 |
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 92 |
Brought up 1 CPUs |
| 93 |
migration_cost=0 |
| 94 |
checking if image is initramfs... it is |
| 95 |
Freeing initrd memory: 1892k freed |
| 96 |
NET: Registered protocol family 16 |
| 97 |
EISA bus registered |
| 98 |
ACPI: bus type pci registered |
| 99 |
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 |
| 100 |
ACPI: Subsystem revision 20060127 |
| 101 |
ACPI: Interpreter enabled |
| 102 |
ACPI: Using IOAPIC for interrupt routing |
| 103 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
| 104 |
PCI: Probing PCI hardware (bus 00) |
| 105 |
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 |
| 106 |
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5 |
| 107 |
Boot video device is 0000:01:00.0 |
| 108 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 109 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
| 110 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, |
| 111 |
disabled. |
| 112 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) |
| 113 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
| 114 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
| 115 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
| 116 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) |
| 117 |
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) |
| 118 |
Linux Plug and Play Support v0.97 (c) Adam Belay |
| 119 |
pnp: PnP ACPI init |
| 120 |
pnp: PnP ACPI: found 12 devices |
| 121 |
SCSI subsystem initialized |
| 122 |
PCI: Using ACPI for IRQ routing |
| 123 |
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a |
| 124 |
report |
| 125 |
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 |
| 126 |
PCI: Bridge: 0000:00:01.0 |
| 127 |
IO window: d000-dfff |
| 128 |
MEM window: e1000000-e10fffff |
| 129 |
PREFETCH window: d8000000-dfffffff |
| 130 |
squashfs: version 3.0 (2006/03/15) Phillip Lougher |
| 131 |
SGI XFS with ACLs, security attributes, realtime, large block numbers, |
| 132 |
no debug enabled |
| 133 |
SGI XFS Quota Management subsystem |
| 134 |
Initializing Cryptographic API |
| 135 |
io scheduler noop registered |
| 136 |
io scheduler deadline registered (default) |
| 137 |
initialized device: /dev/synth, node ( MAJOR 10, MINOR 25 ) |
| 138 |
isapnp: Scanning for PnP cards... |
| 139 |
isapnp: No Plug & Play device found |
| 140 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 141 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 142 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 143 |
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled |
| 144 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 145 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A |
| 146 |
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
| 147 |
mice: PS/2 mouse device common for all mice |
| 148 |
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize |
| 149 |
loop: loaded (max 8 devices) |
| 150 |
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 |
| 151 |
ide: Assuming 33MHz system bus speed for PIO modes; override with |
| 152 |
idebus=xx |
| 153 |
SIS5513: IDE controller at PCI slot 0000:00:02.5 |
| 154 |
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 |
| 155 |
SIS5513: chipset revision 1 |
| 156 |
SIS5513: not 100% native mode: will probe irqs later |
| 157 |
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller |
| 158 |
ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio |
| 159 |
ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio |
| 160 |
Probing IDE interface ide0... |
| 161 |
input: AT Translated Set 2 keyboard as /class/input/input0 |
| 162 |
input: ImPS/2 Generic Wheel Mouse as /class/input/input1 |
| 163 |
hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive |
| 164 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
| 165 |
Probing IDE interface ide1... |
| 166 |
hdc: WDC WD800BB-00JHC0, ATA DISK drive |
| 167 |
ide1 at 0x170-0x177,0x376 on irq 15 |
| 168 |
hdc: max request size: 128KiB |
| 169 |
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, |
| 170 |
UDMA(33) |
| 171 |
hdc: cache flushes supported |
| 172 |
hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 > |
| 173 |
hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) |
| 174 |
Uniform CD-ROM driver Revision: 3.20 |
| 175 |
CAPI Subsystem Rev 1.1.2.8 |
| 176 |
EISA: Probing bus 0 at eisa.0 |
| 177 |
Cannot allocate resource for EISA slot 1 |
| 178 |
Cannot allocate resource for EISA slot 4 |
| 179 |
EISA: Detected 0 cards. |
| 180 |
NET: Registered protocol family 2 |
| 181 |
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
| 182 |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
| 183 |
TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
| 184 |
TCP: Hash tables configured (established 8192 bind 8192) |
| 185 |
TCP reno registered |
| 186 |
TCP bic registered |
| 187 |
NET: Registered protocol family 1 |
| 188 |
NET: Registered protocol family 17 |
| 189 |
Using IPI Shortcut mode |
| 190 |
Freeing unused kernel memory: 192k freed |
| 191 |
usbcore: registered new driver usbfs |
| 192 |
usbcore: registered new driver hub |
| 193 |
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 17 |
| 194 |
ehci_hcd 0000:00:03.3: EHCI Host Controller |
| 195 |
PCI: cache line size of 64 is not supported by device 0000:00:03.3 |
| 196 |
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 |
| 197 |
ehci_hcd 0000:00:03.3: irq 17, io mem 0xe1102000 |
| 198 |
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 |
| 199 |
usb usb1: configuration #1 chosen from 1 choice |
| 200 |
hub 1-0:1.0: USB hub found |
| 201 |
hub 1-0:1.0: 8 ports detected |
| 202 |
usbcore: registered new driver hiddev |
| 203 |
usbcore: registered new driver usbhid |
| 204 |
drivers/usb/input/hid-core.c: v2.6:USB HID core driver |
| 205 |
Initializing USB Mass Storage driver... |
| 206 |
usbcore: registered new driver usb-storage |
| 207 |
USB Mass Storage support registered. |
| 208 |
USB Universal Host Controller Interface driver v2.3 |
| 209 |
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver |
| 210 |
(PCI) |
| 211 |
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18 |
| 212 |
ohci_hcd 0000:00:03.0: OHCI Host Controller |
| 213 |
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 |
| 214 |
ohci_hcd 0000:00:03.0: irq 18, io mem 0xe1104000 |
| 215 |
usb usb2: configuration #1 chosen from 1 choice |
| 216 |
hub 2-0:1.0: USB hub found |
| 217 |
hub 2-0:1.0: 3 ports detected |
| 218 |
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19 |
| 219 |
ohci_hcd 0000:00:03.1: OHCI Host Controller |
| 220 |
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 |
| 221 |
ohci_hcd 0000:00:03.1: irq 19, io mem 0xe1100000 |
| 222 |
usb usb3: configuration #1 chosen from 1 choice |
| 223 |
hub 3-0:1.0: USB hub found |
| 224 |
hub 3-0:1.0: 3 ports detected |
| 225 |
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20 |
| 226 |
ohci_hcd 0000:00:03.2: OHCI Host Controller |
| 227 |
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 |
| 228 |
ohci_hcd 0000:00:03.2: irq 20, io mem 0xe1101000 |
| 229 |
usb usb4: configuration #1 chosen from 1 choice |
| 230 |
hub 4-0:1.0: USB hub found |
| 231 |
hub 4-0:1.0: 2 ports detected |
| 232 |
sl811: driver sl811-hcd, 19 May 2005 |
| 233 |
ieee1394: Initialized config rom entry `ip1394' |
| 234 |
ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) |
| 235 |
ieee1394: sbp2: Try serialize_io=0 for better performance |
| 236 |
libata version 1.20 loaded. |
| 237 |
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@××××××.com |
| 238 |
ReiserFS: hdc6: warning: sh-2021: reiserfs_fill_super: can not find |
| 239 |
reiserfs on hdc6 |
| 240 |
kjournald starting. Commit interval 5 seconds |
| 241 |
EXT3-fs: mounted filesystem with ordered data mode. |
| 242 |
Adding 497972k swap on /dev/hdc5. Priority:-1 extents:1 across:497972k |
| 243 |
EXT3 FS on hdc6, internal journal |
| 244 |
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 21 |
| 245 |
intel8x0_measure_ac97_clock: measured 58665 usecs |
| 246 |
intel8x0: clocking to 48000 |
| 247 |
sis900.c: v1.08.09 Sep. 19 2005 |
| 248 |
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22 |
| 249 |
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. |
| 250 |
0000:00:04.0: Using transceiver found at address 1 as default |
| 251 |
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 22, 00:11:5b:84:60:3b. |
| 252 |
Real Time Clock Driver v1.12ac |
| 253 |
FDC 0 is a post-1991 82077 |
| 254 |
parport: PnPBIOS parport detected. |
| 255 |
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 |
| 256 |
[PCSPP,TRISTATE,COMPAT,ECP,DMA] |
| 257 |
eth0: Media Link On 100mbps full-duplex |
| 258 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
| 259 |
catherine ~ # |
| 260 |
|
| 261 |
|
| 262 |
She uses alsa-driver. From /etc/make.conf: |
| 263 |
|
| 264 |
catherine ~ # cat /etc/make.conf | grep 'ALSA' |
| 265 |
ALSA_CARDS="intel8x0" |
| 266 |
|
| 267 |
|
| 268 |
She's never had a problem with sound before. At first I thought maybe |
| 269 |
her speakers had come unplugged, but sound works perfectly in Windows. |
| 270 |
I know the ALSA packages got upgraded several days ago, but I'm pretty |
| 271 |
sure she'd rebooted (and in the process restarted alsasound) and the |
| 272 |
sound worked. I'm not sure though. She often boots into Windows to |
| 273 |
play Yahoo games that don't work in Linux. Can anyone help? |
| 274 |
-Michael Sullivan- |
| 275 |
|
| 276 |
-- |
| 277 |
gentoo-user@g.o mailing list |
Archives