| 1 |
On Dienstag, 25. September 2007, maxim wexler wrote: |
| 2 |
> Hi group, |
| 3 |
> |
| 4 |
> Just noticed this in dmesg: |
| 5 |
> |
| 6 |
> <snip> |
| 7 |
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete |
| 8 |
> Error } |
| 9 |
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } |
| 10 |
> ide: failed opcode was: unknown |
| 11 |
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete |
| 12 |
> Error } |
| 13 |
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } |
| 14 |
> ide: failed opcode was: unknown |
| 15 |
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete |
| 16 |
> Error } |
| 17 |
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } |
| 18 |
> ide: failed opcode was: unknown |
| 19 |
> hdb: dma_intr: status=0x51 { DriveReady SeekComplete |
| 20 |
> Error } |
| 21 |
> hdb: dma_intr: error=0x84 { DriveStatusError BadCRC } |
| 22 |
> ide: failed opcode was: unknown |
| 23 |
> hda: DMA disabled |
| 24 |
> ide0: reset: success |
| 25 |
> <snip> |
| 26 |
> |
| 27 |
> So far I've changed the cable and turned on |
| 28 |
> IDEDISK_MULTI_MODE in the kernel. |
| 29 |
> |
| 30 |
> No other problems w/ the drive. |
| 31 |
> |
| 32 |
> Drive is Maxtor 120G IDE. Very low hours on it. |
| 33 |
|
| 34 |
so it is still covered by warranty? Replace it! |
| 35 |
> |
| 36 |
> Can I just let this slide? |
| 37 |
|
| 38 |
no, replace it. |
| 39 |
-- |
| 40 |
gentoo-user@g.o mailing list |
Archives