1 |
On Fri, 2010-01-01 at 11:37 -0800, walt wrote: |
2 |
> On 01/01/2010 05:48 AM, Michael Sullivan wrote: |
3 |
> > Hello |
4 |
> > |
5 |
> > My wife's computer is pretty slow, so I've attached and old hard drive |
6 |
> > into a hard drive enclosure and hooked it into her USB port for |
7 |
> > additional swap space. It used to work. The swap space is supposed to |
8 |
> > be /dev/sda1. The problem is that for some reason when I rebooted this |
9 |
> > morning with a new kernel, /dev/sda does not exist anymore... |
10 |
> |
11 |
> Hm. So the only thing you changed was the new kernel? Might help to |
12 |
> know why you built the new kernel. What problem were you solving by |
13 |
> doing it? |
14 |
> |
15 |
OK here goes. I built the new kernel because with the old one /dev/sda |
16 |
didn't seem to exist when I know it should. And besides, there was a |
17 |
newer kernel marked as stable and aren't we always supposed to use the |
18 |
newest stable kernel for security reasons, unless there's something that |
19 |
we need done that the new kernel doesn't do? |
20 |
|
21 |
> I would try booting the machine without the USB swap disk and then |
22 |
> hotplug it when the machine is already running. What does dmesg say |
23 |
> then? Can be simpler to interpret when you know exactly which lines |
24 |
> were printed in response to the newly connected drive. |
25 |
|
26 |
|
27 |
I rebooted the machine with the drive unplugged and ran dmesg: |
28 |
|
29 |
catherine ~ # cat dmesg.txt |
30 |
Initializing cgroup subsys cpuset |
31 |
Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 |
32 |
(Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 |
33 |
KERNEL supported cpus: |
34 |
Intel GenuineIntel |
35 |
AMD AuthenticAMD |
36 |
NSC Geode by NSC |
37 |
Cyrix CyrixInstead |
38 |
Centaur CentaurHauls |
39 |
Transmeta GenuineTMx86 |
40 |
Transmeta TransmetaCPU |
41 |
UMC UMC UMC UMC |
42 |
BIOS-provided physical RAM map: |
43 |
BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
44 |
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
45 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
46 |
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) |
47 |
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) |
48 |
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) |
49 |
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
50 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
51 |
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
52 |
DMI 2.2 present. |
53 |
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. |
54 |
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> |
55 |
(reserved) |
56 |
last_pfn = 0xdff0 max_arch_pfn = 0x100000 |
57 |
MTRR default type: uncachable |
58 |
MTRR fixed ranges enabled: |
59 |
00000-9FFFF write-back |
60 |
A0000-BFFFF uncachable |
61 |
C0000-C7FFF write-protect |
62 |
C8000-EFFFF uncachable |
63 |
F0000-FFFFF write-protect |
64 |
MTRR variable ranges enabled: |
65 |
0 base 000000000 mask FF0000000 write-back |
66 |
1 base 00E000000 mask FFE000000 uncachable |
67 |
2 base 0D0000000 mask FF8000000 write-combining |
68 |
3 disabled |
69 |
4 disabled |
70 |
5 disabled |
71 |
6 disabled |
72 |
7 disabled |
73 |
initial memory mapped : 0 - 00800000 |
74 |
init_memory_mapping: 0000000000000000-000000000dff0000 |
75 |
0000000000 - 0000400000 page 4k |
76 |
0000400000 - 000dc00000 page 2M |
77 |
000dc00000 - 000dff0000 page 4k |
78 |
kernel direct mapping tables up to dff0000 @ 10000-15000 |
79 |
RAMDISK: 0dcc5000 - 0dfdf8aa |
80 |
ACPI: RSDP 000f7170 00014 (v00 AWARD ) |
81 |
ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
82 |
ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
83 |
ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) |
84 |
ACPI: FACS 0dff0000 00040 |
85 |
ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
86 |
ACPI: Local APIC address 0xfee00000 |
87 |
0MB HIGHMEM available. |
88 |
223MB LOWMEM available. |
89 |
mapped low ram: 0 - 0dff0000 |
90 |
low ram: 0 - 0dff0000 |
91 |
node 0 low ram: 00000000 - 0dff0000 |
92 |
node 0 bootmap 00011000 - 00012c00 |
93 |
(9 early reservations) ==> bootmem [0000000000 - 000dff0000] |
94 |
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - |
95 |
0000001000] |
96 |
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - |
97 |
0000002000] |
98 |
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - |
99 |
0000007000] |
100 |
#3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - |
101 |
0000637f00] |
102 |
#4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - |
103 |
000dfdf8aa] |
104 |
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - |
105 |
0000100000] |
106 |
#6 [0000638000 - 000063a06a] BRK ==> [0000638000 - |
107 |
000063a06a] |
108 |
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - |
109 |
0000011000] |
110 |
#8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - |
111 |
0000013000] |
112 |
found SMP MP-table at [c00f57a0] f57a0 |
113 |
Zone PFN ranges: |
114 |
DMA 0x00000010 -> 0x00001000 |
115 |
Normal 0x00001000 -> 0x0000dff0 |
116 |
HighMem 0x0000dff0 -> 0x0000dff0 |
117 |
Movable zone start PFN for each node |
118 |
early_node_map[2] active PFN ranges |
119 |
0: 0x00000010 -> 0x0000009f |
120 |
0: 0x00000100 -> 0x0000dff0 |
121 |
On node 0 totalpages: 57215 |
122 |
free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 |
123 |
DMA zone: 32 pages used for memmap |
124 |
DMA zone: 0 pages reserved |
125 |
DMA zone: 3951 pages, LIFO batch:0 |
126 |
Normal zone: 416 pages used for memmap |
127 |
Normal zone: 52816 pages, LIFO batch:15 |
128 |
Using APIC driver default |
129 |
ACPI: PM-Timer IO Port: 0x1008 |
130 |
ACPI: Local APIC address 0xfee00000 |
131 |
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
132 |
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
133 |
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
134 |
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 |
135 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
136 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) |
137 |
ACPI: IRQ0 used by override. |
138 |
ACPI: IRQ2 used by override. |
139 |
ACPI: IRQ9 used by override. |
140 |
Enabling APIC mode: Flat. Using 1 I/O APICs |
141 |
Using ACPI (MADT) for SMP configuration information |
142 |
SMP: Allowing 1 CPUs, 0 hotplug CPUs |
143 |
nr_irqs_gsi: 24 |
144 |
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
145 |
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
146 |
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
147 |
Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) |
148 |
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 |
149 |
PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes |
150 |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: |
151 |
56767 |
152 |
Kernel command line: real_root=/dev/hdc6 udev |
153 |
PID hash table entries: 1024 (order: 10, 4096 bytes) |
154 |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
155 |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
156 |
Enabling fast FPU save and restore... done. |
157 |
Enabling unmasked SIMD FPU exception support... done. |
158 |
Initializing CPU#0 |
159 |
Initializing HighMem for node 0 (00000000:00000000) |
160 |
Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, |
161 |
1508k data, 428k init, 0k highmem) |
162 |
virtual kernel memory layout: |
163 |
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) |
164 |
pkmap : 0xff800000 - 0xffc00000 (4096 kB) |
165 |
vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) |
166 |
lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) |
167 |
.init : 0xc0569000 - 0xc05d4000 ( 428 kB) |
168 |
.data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) |
169 |
.text : 0xc0100000 - 0xc03ef6c0 (3005 kB) |
170 |
Checking if this processor honours the WP bit even in supervisor |
171 |
mode...Ok. |
172 |
Hierarchical RCU implementation. |
173 |
NR_IRQS:512 |
174 |
CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 |
175 |
Fast TSC calibration using PIT |
176 |
Detected 1662.338 MHz processor. |
177 |
Console: colour VGA+ 80x25 |
178 |
console [tty0] enabled |
179 |
Calibrating delay loop (skipped), value calculated using timer |
180 |
frequency.. 3324.67 BogoMIPS (lpj=16623380) |
181 |
Security Framework initialized |
182 |
Mount-cache hash table entries: 512 |
183 |
Initializing cgroup subsys ns |
184 |
Initializing cgroup subsys cpuacct |
185 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
186 |
CPU: L2 Cache: 256K (64 bytes/line) |
187 |
mce: CPU supports 4 MCE banks |
188 |
Performance Counters: AMD PMU driver. |
189 |
... version: 0 |
190 |
... bit width: 48 |
191 |
... generic counters: 4 |
192 |
... value mask: 0000ffffffffffff |
193 |
... max period: 00007fffffffffff |
194 |
... fixed-purpose counters: 0 |
195 |
... counter mask: 000000000000000f |
196 |
Checking 'hlt' instruction... OK. |
197 |
SMP alternatives: switching to UP code |
198 |
Freeing SMP alternatives: 25k freed |
199 |
ACPI: Core revision 20090521 |
200 |
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
201 |
CPU0: AMD Sempron(tm) 2400+ stepping 01 |
202 |
Brought up 1 CPUs |
203 |
Total of 1 processors activated (3324.67 BogoMIPS). |
204 |
CPU0 attaching NULL sched-domain. |
205 |
Booting paravirtualized kernel on bare hardware |
206 |
xor: automatically using best checksumming function: pIII_sse |
207 |
pIII_sse : 4598.000 MB/sec |
208 |
xor: using function: pIII_sse (4598.000 MB/sec) |
209 |
NET: Registered protocol family 16 |
210 |
ACPI: bus type pci registered |
211 |
dca service started, version 1.8 |
212 |
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 |
213 |
bio: create slab <bio-0> at 0 |
214 |
ACPI: EC: Look up EC in DSDT |
215 |
ACPI: Interpreter enabled |
216 |
ACPI: (supports S0 S1 S4 S5) |
217 |
ACPI: Using IOAPIC for interrupt routing |
218 |
ACPI: No dock devices found. |
219 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
220 |
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] |
221 |
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] |
222 |
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] |
223 |
pci 0000:00:02.5: reg 18 io port: [0x170-0x177] |
224 |
pci 0000:00:02.5: reg 1c io port: [0x374-0x377] |
225 |
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] |
226 |
pci 0000:00:02.5: PME# supported from D3cold |
227 |
pci 0000:00:02.5: PME# disabled |
228 |
pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] |
229 |
pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] |
230 |
pci 0000:00:02.7: supports D1 D2 |
231 |
pci 0000:00:02.7: PME# supported from D3hot D3cold |
232 |
pci 0000:00:02.7: PME# disabled |
233 |
pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] |
234 |
pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] |
235 |
pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] |
236 |
pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] |
237 |
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold |
238 |
pci 0000:00:03.3: PME# disabled |
239 |
pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] |
240 |
pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] |
241 |
pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] |
242 |
pci 0000:00:04.0: supports D1 D2 |
243 |
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold |
244 |
pci 0000:00:04.0: PME# disabled |
245 |
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] |
246 |
pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] |
247 |
pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] |
248 |
pci 0000:01:00.0: supports D1 D2 |
249 |
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] |
250 |
pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] |
251 |
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] |
252 |
pci_bus 0000:00: on NUMA node 0 |
253 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
254 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
255 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, |
256 |
disabled. |
257 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) |
258 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
259 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
260 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
261 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) |
262 |
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) |
263 |
SCSI subsystem initialized |
264 |
libata version 3.00 loaded. |
265 |
raid6: int32x1 433 MB/s |
266 |
raid6: int32x2 652 MB/s |
267 |
raid6: int32x4 573 MB/s |
268 |
raid6: int32x8 458 MB/s |
269 |
raid6: mmxx1 1356 MB/s |
270 |
raid6: mmxx2 2433 MB/s |
271 |
raid6: sse1x1 1276 MB/s |
272 |
raid6: sse1x2 2020 MB/s |
273 |
raid6: using algorithm sse1x2 (2020 MB/s) |
274 |
PCI: Using ACPI for IRQ routing |
275 |
pnp: PnP ACPI init |
276 |
ACPI: bus type pnp registered |
277 |
pnp: PnP ACPI: found 12 devices |
278 |
ACPI: ACPI bus type pnp unregistered |
279 |
system 00:00: iomem range 0xc8000-0xcbfff has been reserved |
280 |
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved |
281 |
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved |
282 |
system 00:00: iomem range 0xfc000-0xfffff could not be reserved |
283 |
system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved |
284 |
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved |
285 |
system 00:00: iomem range 0x0-0x9ffff could not be reserved |
286 |
system 00:00: iomem range 0x100000-0xdfeffff could not be reserved |
287 |
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved |
288 |
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved |
289 |
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved |
290 |
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved |
291 |
system 00:02: ioport range 0x4d0-0x4d1 has been reserved |
292 |
system 00:02: ioport range 0x800-0x805 has been reserved |
293 |
system 00:02: ioport range 0x290-0x297 has been reserved |
294 |
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 |
295 |
pci 0000:00:01.0: IO window: 0xd000-0xdfff |
296 |
pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff |
297 |
pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff |
298 |
pci_bus 0000:00: resource 0 io: [0x00-0xffff] |
299 |
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] |
300 |
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] |
301 |
pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] |
302 |
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] |
303 |
NET: Registered protocol family 2 |
304 |
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
305 |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
306 |
TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
307 |
TCP: Hash tables configured (established 8192 bind 8192) |
308 |
TCP reno registered |
309 |
NET: Registered protocol family 1 |
310 |
Trying to unpack rootfs image as initramfs... |
311 |
Freeing initrd memory: 3178k freed |
312 |
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) |
313 |
apm: overridden by ACPI. |
314 |
audit: initializing netlink socket (disabled) |
315 |
type=2000 audit(1262420890.810:1): initialized |
316 |
HugeTLB registered 4 MB page size, pre-allocated 0 pages |
317 |
VFS: Disk quotas dquot_6.5.2 |
318 |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
319 |
squashfs: version 4.0 (2009/01/31) Phillip Lougher |
320 |
msgmni has been set to 432 |
321 |
alg: No test for stdrng (krng) |
322 |
async_tx: api initialized (async) |
323 |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) |
324 |
io scheduler noop registered |
325 |
io scheduler anticipatory registered (default) |
326 |
io scheduler deadline registered |
327 |
io scheduler cfq registered |
328 |
pci 0000:01:00.0: Boot video device |
329 |
isapnp: Scanning for PnP cards... |
330 |
Switched to high resolution mode on CPU 0 |
331 |
isapnp: No Plug & Play device found |
332 |
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
333 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
334 |
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
335 |
brd: module loaded |
336 |
loop: module loaded |
337 |
input: Macintosh mouse button emulation as /devices/virtual/input/input0 |
338 |
Uniform Multi-Platform E-IDE driver |
339 |
pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 |
340 |
sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller |
341 |
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) |
342 |
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later |
343 |
ide0: BM-DMA at 0x4000-0x4007 |
344 |
ide1: BM-DMA at 0x4008-0x400f |
345 |
Probing IDE interface ide0... |
346 |
hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive |
347 |
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
348 |
hda: UDMA/33 mode selected |
349 |
Probing IDE interface ide1... |
350 |
hdc: WDC WD800BB-00JHC0, ATA DISK drive |
351 |
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
352 |
hdc: host side 80-wire cable detection failed, limiting max speed to |
353 |
UDMA33 |
354 |
hdc: UDMA/33 mode selected |
355 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
356 |
ide1 at 0x170-0x177,0x376 on irq 15 |
357 |
ide_generic: please use "probe_mask=0x3f" module parameter for probing |
358 |
all legacy ISA IDE ports |
359 |
ide-gd driver 1.18 |
360 |
hdc: max request size: 128KiB |
361 |
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 |
362 |
hdc: cache flushes supported |
363 |
hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > |
364 |
ide-cd driver 5.00 |
365 |
ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache |
366 |
Uniform CD-ROM driver Revision: 3.20 |
367 |
Loading iSCSI transport class v2.0-870. |
368 |
iscsi: registered transport (tcp) |
369 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
370 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
371 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
372 |
mice: PS/2 mouse device common for all mice |
373 |
md: raid0 personality registered for level 0 |
374 |
md: raid1 personality registered for level 1 |
375 |
md: raid6 personality registered for level 6 |
376 |
md: raid5 personality registered for level 5 |
377 |
md: raid4 personality registered for level 4 |
378 |
cpuidle: using governor ladder |
379 |
TCP cubic registered |
380 |
NET: Registered protocol family 17 |
381 |
Using IPI No-Shortcut mode |
382 |
registered taskstats version 1 |
383 |
Freeing unused kernel memory: 428k freed |
384 |
input: AT Translated Set 2 keyboard |
385 |
as /devices/platform/i8042/serio0/input/input1 |
386 |
input: ImPS/2 Generic Wheel Mouse |
387 |
as /devices/platform/i8042/serio1/input/input2 |
388 |
NCR53c406a: no available ports found |
389 |
scsi: <fdomain> Detection failed (no card) |
390 |
GDT-HA: Storage RAID Controller Driver. Version: 3.05 |
391 |
qlogicfas: no cards were found, please specify I/O address and IRQ using |
392 |
iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! |
393 |
NCR53c406a: no available ports found |
394 |
imm: Version 2.05 (for Linux 2.4.0) |
395 |
sym53c416.c: Version 1.0.0-ac |
396 |
Fusion MPT base driver 3.04.10 |
397 |
Copyright (c) 1999-2008 LSI Corporation |
398 |
Fusion MPT SPI Host driver 3.04.10 |
399 |
Fusion MPT FC Host driver 3.04.10 |
400 |
Fusion MPT SAS Host driver 3.04.10 |
401 |
3ware Storage Controller device driver for Linux v1.26.02.002. |
402 |
3ware 9000 Storage Controller device driver for Linux v2.26.02.012. |
403 |
Compaq SMART2 Driver (v 2.6.0) |
404 |
HP CISS Driver (v 3.6.20) |
405 |
Adaptec aacraid driver 1.1-5[2461]-ms |
406 |
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) |
407 |
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) |
408 |
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 |
409 |
QLogic Fibre Channel HBA Driver: 8.03.01-k4 |
410 |
Emulex LightPulse Fibre Channel SCSI driver 8.3.3 |
411 |
Copyright(c) 2004-2009 Emulex. All rights reserved. |
412 |
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded |
413 |
usbcore: registered new interface driver usbfs |
414 |
usbcore: registered new interface driver hub |
415 |
usbcore: registered new device driver usb |
416 |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
417 |
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 |
418 |
ehci_hcd 0000:00:03.3: EHCI Host Controller |
419 |
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 |
420 |
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported |
421 |
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 |
422 |
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 |
423 |
usb usb1: configuration #1 chosen from 1 choice |
424 |
hub 1-0:1.0: USB hub found |
425 |
hub 1-0:1.0: 8 ports detected |
426 |
Initializing USB Mass Storage driver... |
427 |
usbcore: registered new interface driver usb-storage |
428 |
USB Mass Storage support registered. |
429 |
uhci_hcd: USB Universal Host Controller Interface driver |
430 |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
431 |
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 |
432 |
ohci_hcd 0000:00:03.0: OHCI Host Controller |
433 |
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 |
434 |
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 |
435 |
usb usb2: configuration #1 chosen from 1 choice |
436 |
hub 2-0:1.0: USB hub found |
437 |
hub 2-0:1.0: 3 ports detected |
438 |
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 |
439 |
ohci_hcd 0000:00:03.1: OHCI Host Controller |
440 |
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 |
441 |
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 |
442 |
usb usb3: configuration #1 chosen from 1 choice |
443 |
hub 3-0:1.0: USB hub found |
444 |
hub 3-0:1.0: 3 ports detected |
445 |
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 |
446 |
ohci_hcd 0000:00:03.2: OHCI Host Controller |
447 |
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 |
448 |
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 |
449 |
usb usb4: configuration #1 chosen from 1 choice |
450 |
hub 4-0:1.0: USB hub found |
451 |
hub 4-0:1.0: 2 ports detected |
452 |
usbcore: registered new interface driver hiddev |
453 |
usbcore: registered new interface driver usbhid |
454 |
usbhid: v2.6:USB HID core driver |
455 |
sl811: driver sl811-hcd, 19 May 2005 |
456 |
device-mapper: uevent: version 1.0.3 |
457 |
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: |
458 |
dm-devel@××××××.com |
459 |
md: raid10 personality registered for level 10 |
460 |
JFS: nTxBlock = 1733, nTxLock = 13867 |
461 |
RPC: Registered udp transport module. |
462 |
RPC: Registered tcp transport module. |
463 |
SGI XFS with ACLs, security attributes, realtime, large block/inode |
464 |
numbers, no debug enabled |
465 |
SGI XFS Quota Management subsystem |
466 |
fuse init (API version 7.12) |
467 |
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI |
468 |
Copyright (c) 1999-2006 Intel Corporation. |
469 |
kjournald starting. Commit interval 5 seconds |
470 |
EXT3-fs: mounted filesystem with writeback data mode. |
471 |
udev: starting version 146 |
472 |
IT8705 SuperIO detected. |
473 |
parport_pc 00:09: reported by Plug and Play ACPI |
474 |
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 |
475 |
[PCSPP,TRISTATE,COMPAT,ECP,DMA] |
476 |
FDC 0 is a post-1991 82077 |
477 |
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
478 |
ACPI: Power Button [PWRF] |
479 |
input: Power Button |
480 |
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 |
481 |
ACPI: Power Button [PWRB] |
482 |
input: Sleep Button |
483 |
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 |
484 |
ACPI: Sleep Button [FUTS] |
485 |
Linux agpgart interface v0.103 |
486 |
thermal LNXTHERM:01: registered as thermal_zone0 |
487 |
ACPI: Thermal Zone [THRM] (40 C) |
488 |
fan PNP0C0B:00: registered as cooling_device0 |
489 |
ACPI: Fan [FAN] (on) |
490 |
agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] |
491 |
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 |
492 |
processor LNXCPU:00: registered as cooling_device1 |
493 |
pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
494 |
input: PC Speaker as /devices/platform/pcspkr/input/input6 |
495 |
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
496 |
ppdev: user-space parallel port driver |
497 |
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 |
498 |
sis900.c: v1.08.10 Apr. 2 2006 |
499 |
rtc_cmos 00:04: RTC can wake from S4 |
500 |
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 |
501 |
rtc0: alarms up to one year, 242 bytes nvram |
502 |
intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) |
503 |
intel8x0: clocking to 48000 |
504 |
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 |
505 |
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. |
506 |
0000:00:04.0: Using transceiver found at address 1 as default |
507 |
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b |
508 |
EXT3 FS on hdc6, internal journal |
509 |
lp0: using parport0 (interrupt-driven). |
510 |
Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k |
511 |
eth0: Media Link On 100mbps full-duplex |
512 |
warning: `named' uses 32-bit capabilities (legacy support in use) |
513 |
NET: Registered protocol family 10 |
514 |
lo: Disabled Privacy Extensions |
515 |
ip_tables: (C) 2000-2006 Netfilter Core Team |
516 |
nf_conntrack version 0.5.0 (3583 buckets, 14332 max) |
517 |
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use |
518 |
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option |
519 |
or |
520 |
sysctl net.netfilter.nf_conntrack_acct=1 to enable it. |
521 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
522 |
svc: failed to register lockdv1 RPC service (errno 97). |
523 |
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery |
524 |
directory |
525 |
NFSD: starting 90-second grace period |
526 |
eth0: no IPv6 routers present |
527 |
catherine ~ # |
528 |
|
529 |
and then plugged in: |
530 |
|
531 |
catherine ~ # cat dmesg-new.txt |
532 |
Initializing cgroup subsys cpuset |
533 |
Linux version 2.6.31-gentoo-r6 (root@catherine) (gcc version 4.3.4 |
534 |
(Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Thu Dec 31 19:13:07 CST 2009 |
535 |
KERNEL supported cpus: |
536 |
Intel GenuineIntel |
537 |
AMD AuthenticAMD |
538 |
NSC Geode by NSC |
539 |
Cyrix CyrixInstead |
540 |
Centaur CentaurHauls |
541 |
Transmeta GenuineTMx86 |
542 |
Transmeta TransmetaCPU |
543 |
UMC UMC UMC UMC |
544 |
BIOS-provided physical RAM map: |
545 |
BIOS-e820: 0000000000000000 - 000000000009f800 (usable) |
546 |
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) |
547 |
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) |
548 |
BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) |
549 |
BIOS-e820: 000000000dff0000 - 000000000dff3000 (ACPI NVS) |
550 |
BIOS-e820: 000000000dff3000 - 000000000e000000 (ACPI data) |
551 |
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) |
552 |
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) |
553 |
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) |
554 |
DMI 2.2 present. |
555 |
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. |
556 |
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> |
557 |
(reserved) |
558 |
last_pfn = 0xdff0 max_arch_pfn = 0x100000 |
559 |
MTRR default type: uncachable |
560 |
MTRR fixed ranges enabled: |
561 |
00000-9FFFF write-back |
562 |
A0000-BFFFF uncachable |
563 |
C0000-C7FFF write-protect |
564 |
C8000-EFFFF uncachable |
565 |
F0000-FFFFF write-protect |
566 |
MTRR variable ranges enabled: |
567 |
0 base 000000000 mask FF0000000 write-back |
568 |
1 base 00E000000 mask FFE000000 uncachable |
569 |
2 base 0D0000000 mask FF8000000 write-combining |
570 |
3 disabled |
571 |
4 disabled |
572 |
5 disabled |
573 |
6 disabled |
574 |
7 disabled |
575 |
initial memory mapped : 0 - 00800000 |
576 |
init_memory_mapping: 0000000000000000-000000000dff0000 |
577 |
0000000000 - 0000400000 page 4k |
578 |
0000400000 - 000dc00000 page 2M |
579 |
000dc00000 - 000dff0000 page 4k |
580 |
kernel direct mapping tables up to dff0000 @ 10000-15000 |
581 |
RAMDISK: 0dcc5000 - 0dfdf8aa |
582 |
ACPI: RSDP 000f7170 00014 (v00 AWARD ) |
583 |
ACPI: RSDT 0dff3000 0002C (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
584 |
ACPI: FACP 0dff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
585 |
ACPI: DSDT 0dff30c0 038FA (v01 AWARD AWRDACPI 00001000 MSFT 0100000E) |
586 |
ACPI: FACS 0dff0000 00040 |
587 |
ACPI: APIC 0dff69c0 0005A (v01 AWARD AWRDACPI 42302E31 AWRD 00000000) |
588 |
ACPI: Local APIC address 0xfee00000 |
589 |
0MB HIGHMEM available. |
590 |
223MB LOWMEM available. |
591 |
mapped low ram: 0 - 0dff0000 |
592 |
low ram: 0 - 0dff0000 |
593 |
node 0 low ram: 00000000 - 0dff0000 |
594 |
node 0 bootmap 00011000 - 00012c00 |
595 |
(9 early reservations) ==> bootmem [0000000000 - 000dff0000] |
596 |
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - |
597 |
0000001000] |
598 |
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - |
599 |
0000002000] |
600 |
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - |
601 |
0000007000] |
602 |
#3 [0000100000 - 0000637f00] TEXT DATA BSS ==> [0000100000 - |
603 |
0000637f00] |
604 |
#4 [000dcc5000 - 000dfdf8aa] RAMDISK ==> [000dcc5000 - |
605 |
000dfdf8aa] |
606 |
#5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - |
607 |
0000100000] |
608 |
#6 [0000638000 - 000063a06a] BRK ==> [0000638000 - |
609 |
000063a06a] |
610 |
#7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - |
611 |
0000011000] |
612 |
#8 [0000011000 - 0000013000] BOOTMAP ==> [0000011000 - |
613 |
0000013000] |
614 |
found SMP MP-table at [c00f57a0] f57a0 |
615 |
Zone PFN ranges: |
616 |
DMA 0x00000010 -> 0x00001000 |
617 |
Normal 0x00001000 -> 0x0000dff0 |
618 |
HighMem 0x0000dff0 -> 0x0000dff0 |
619 |
Movable zone start PFN for each node |
620 |
early_node_map[2] active PFN ranges |
621 |
0: 0x00000010 -> 0x0000009f |
622 |
0: 0x00000100 -> 0x0000dff0 |
623 |
On node 0 totalpages: 57215 |
624 |
free_area_init_node: node 0, pgdat c0561da0, node_mem_map c1000200 |
625 |
DMA zone: 32 pages used for memmap |
626 |
DMA zone: 0 pages reserved |
627 |
DMA zone: 3951 pages, LIFO batch:0 |
628 |
Normal zone: 416 pages used for memmap |
629 |
Normal zone: 52816 pages, LIFO batch:15 |
630 |
Using APIC driver default |
631 |
ACPI: PM-Timer IO Port: 0x1008 |
632 |
ACPI: Local APIC address 0xfee00000 |
633 |
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
634 |
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
635 |
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
636 |
IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23 |
637 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
638 |
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) |
639 |
ACPI: IRQ0 used by override. |
640 |
ACPI: IRQ2 used by override. |
641 |
ACPI: IRQ9 used by override. |
642 |
Enabling APIC mode: Flat. Using 1 I/O APICs |
643 |
Using ACPI (MADT) for SMP configuration information |
644 |
SMP: Allowing 1 CPUs, 0 hotplug CPUs |
645 |
nr_irqs_gsi: 24 |
646 |
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 |
647 |
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 |
648 |
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 |
649 |
Allocating PCI resources starting at e000000 (gap: e000000:f0c00000) |
650 |
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 |
651 |
PERCPU: Embedded 15 pages at c11c2000, static data 38684 bytes |
652 |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: |
653 |
56767 |
654 |
Kernel command line: real_root=/dev/hdc6 udev |
655 |
PID hash table entries: 1024 (order: 10, 4096 bytes) |
656 |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) |
657 |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) |
658 |
Enabling fast FPU save and restore... done. |
659 |
Enabling unmasked SIMD FPU exception support... done. |
660 |
Initializing CPU#0 |
661 |
Initializing HighMem for node 0 (00000000:00000000) |
662 |
Memory: 218040k/229312k available (3005k kernel code, 10620k reserved, |
663 |
1508k data, 428k init, 0k highmem) |
664 |
virtual kernel memory layout: |
665 |
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB) |
666 |
pkmap : 0xff800000 - 0xffc00000 (4096 kB) |
667 |
vmalloc : 0xce7f0000 - 0xff7fe000 ( 784 MB) |
668 |
lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) |
669 |
.init : 0xc0569000 - 0xc05d4000 ( 428 kB) |
670 |
.data : 0xc03ef6c0 - 0xc05688a8 (1508 kB) |
671 |
.text : 0xc0100000 - 0xc03ef6c0 (3005 kB) |
672 |
Checking if this processor honours the WP bit even in supervisor |
673 |
mode...Ok. |
674 |
Hierarchical RCU implementation. |
675 |
NR_IRQS:512 |
676 |
CPU 0 irqstacks, hard=c11c2000 soft=c11c3000 |
677 |
Fast TSC calibration using PIT |
678 |
Detected 1662.338 MHz processor. |
679 |
Console: colour VGA+ 80x25 |
680 |
console [tty0] enabled |
681 |
Calibrating delay loop (skipped), value calculated using timer |
682 |
frequency.. 3324.67 BogoMIPS (lpj=16623380) |
683 |
Security Framework initialized |
684 |
Mount-cache hash table entries: 512 |
685 |
Initializing cgroup subsys ns |
686 |
Initializing cgroup subsys cpuacct |
687 |
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) |
688 |
CPU: L2 Cache: 256K (64 bytes/line) |
689 |
mce: CPU supports 4 MCE banks |
690 |
Performance Counters: AMD PMU driver. |
691 |
... version: 0 |
692 |
... bit width: 48 |
693 |
... generic counters: 4 |
694 |
... value mask: 0000ffffffffffff |
695 |
... max period: 00007fffffffffff |
696 |
... fixed-purpose counters: 0 |
697 |
... counter mask: 000000000000000f |
698 |
Checking 'hlt' instruction... OK. |
699 |
SMP alternatives: switching to UP code |
700 |
Freeing SMP alternatives: 25k freed |
701 |
ACPI: Core revision 20090521 |
702 |
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
703 |
CPU0: AMD Sempron(tm) 2400+ stepping 01 |
704 |
Brought up 1 CPUs |
705 |
Total of 1 processors activated (3324.67 BogoMIPS). |
706 |
CPU0 attaching NULL sched-domain. |
707 |
Booting paravirtualized kernel on bare hardware |
708 |
xor: automatically using best checksumming function: pIII_sse |
709 |
pIII_sse : 4598.000 MB/sec |
710 |
xor: using function: pIII_sse (4598.000 MB/sec) |
711 |
NET: Registered protocol family 16 |
712 |
ACPI: bus type pci registered |
713 |
dca service started, version 1.8 |
714 |
PCI: PCI BIOS revision 2.10 entry at 0xfb4e0, last bus=1 |
715 |
bio: create slab <bio-0> at 0 |
716 |
ACPI: EC: Look up EC in DSDT |
717 |
ACPI: Interpreter enabled |
718 |
ACPI: (supports S0 S1 S4 S5) |
719 |
ACPI: Using IOAPIC for interrupt routing |
720 |
ACPI: No dock devices found. |
721 |
ACPI: PCI Root Bridge [PCI0] (0000:00) |
722 |
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff] |
723 |
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7] |
724 |
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7] |
725 |
pci 0000:00:02.5: reg 18 io port: [0x170-0x177] |
726 |
pci 0000:00:02.5: reg 1c io port: [0x374-0x377] |
727 |
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f] |
728 |
pci 0000:00:02.5: PME# supported from D3cold |
729 |
pci 0000:00:02.5: PME# disabled |
730 |
pci 0000:00:02.7: reg 10 io port: [0xe000-0xe0ff] |
731 |
pci 0000:00:02.7: reg 14 io port: [0xe400-0xe47f] |
732 |
pci 0000:00:02.7: supports D1 D2 |
733 |
pci 0000:00:02.7: PME# supported from D3hot D3cold |
734 |
pci 0000:00:02.7: PME# disabled |
735 |
pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff] |
736 |
pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff] |
737 |
pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff] |
738 |
pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff] |
739 |
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold |
740 |
pci 0000:00:03.3: PME# disabled |
741 |
pci 0000:00:04.0: reg 10 io port: [0xe800-0xe8ff] |
742 |
pci 0000:00:04.0: reg 14 32bit mmio: [0xe1103000-0xe1103fff] |
743 |
pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff] |
744 |
pci 0000:00:04.0: supports D1 D2 |
745 |
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold |
746 |
pci 0000:00:04.0: PME# disabled |
747 |
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] |
748 |
pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff] |
749 |
pci 0000:01:00.0: reg 18 io port: [0xd000-0xd07f] |
750 |
pci 0000:01:00.0: supports D1 D2 |
751 |
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff] |
752 |
pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff] |
753 |
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff] |
754 |
pci_bus 0000:00: on NUMA node 0 |
755 |
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
756 |
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
757 |
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, |
758 |
disabled. |
759 |
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) |
760 |
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
761 |
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) |
762 |
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) |
763 |
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) |
764 |
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15) |
765 |
SCSI subsystem initialized |
766 |
libata version 3.00 loaded. |
767 |
raid6: int32x1 433 MB/s |
768 |
raid6: int32x2 652 MB/s |
769 |
raid6: int32x4 573 MB/s |
770 |
raid6: int32x8 458 MB/s |
771 |
raid6: mmxx1 1356 MB/s |
772 |
raid6: mmxx2 2433 MB/s |
773 |
raid6: sse1x1 1276 MB/s |
774 |
raid6: sse1x2 2020 MB/s |
775 |
raid6: using algorithm sse1x2 (2020 MB/s) |
776 |
PCI: Using ACPI for IRQ routing |
777 |
pnp: PnP ACPI init |
778 |
ACPI: bus type pnp registered |
779 |
pnp: PnP ACPI: found 12 devices |
780 |
ACPI: ACPI bus type pnp unregistered |
781 |
system 00:00: iomem range 0xc8000-0xcbfff has been reserved |
782 |
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved |
783 |
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved |
784 |
system 00:00: iomem range 0xfc000-0xfffff could not be reserved |
785 |
system 00:00: iomem range 0xdff0000-0xdffffff could not be reserved |
786 |
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved |
787 |
system 00:00: iomem range 0x0-0x9ffff could not be reserved |
788 |
system 00:00: iomem range 0x100000-0xdfeffff could not be reserved |
789 |
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved |
790 |
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved |
791 |
system 00:00: iomem range 0xfec00000-0xfecfffff could not be reserved |
792 |
system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved |
793 |
system 00:02: ioport range 0x4d0-0x4d1 has been reserved |
794 |
system 00:02: ioport range 0x800-0x805 has been reserved |
795 |
system 00:02: ioport range 0x290-0x297 has been reserved |
796 |
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 |
797 |
pci 0000:00:01.0: IO window: 0xd000-0xdfff |
798 |
pci 0000:00:01.0: MEM window: 0xe1000000-0xe10fffff |
799 |
pci 0000:00:01.0: PREFETCH window: 0xd8000000-0xdfffffff |
800 |
pci_bus 0000:00: resource 0 io: [0x00-0xffff] |
801 |
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] |
802 |
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] |
803 |
pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff] |
804 |
pci_bus 0000:01: resource 2 pref mem [0xd8000000-0xdfffffff] |
805 |
NET: Registered protocol family 2 |
806 |
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) |
807 |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) |
808 |
TCP bind hash table entries: 8192 (order: 4, 65536 bytes) |
809 |
TCP: Hash tables configured (established 8192 bind 8192) |
810 |
TCP reno registered |
811 |
NET: Registered protocol family 1 |
812 |
Trying to unpack rootfs image as initramfs... |
813 |
Freeing initrd memory: 3178k freed |
814 |
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) |
815 |
apm: overridden by ACPI. |
816 |
audit: initializing netlink socket (disabled) |
817 |
type=2000 audit(1262420890.810:1): initialized |
818 |
HugeTLB registered 4 MB page size, pre-allocated 0 pages |
819 |
VFS: Disk quotas dquot_6.5.2 |
820 |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) |
821 |
squashfs: version 4.0 (2009/01/31) Phillip Lougher |
822 |
msgmni has been set to 432 |
823 |
alg: No test for stdrng (krng) |
824 |
async_tx: api initialized (async) |
825 |
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) |
826 |
io scheduler noop registered |
827 |
io scheduler anticipatory registered (default) |
828 |
io scheduler deadline registered |
829 |
io scheduler cfq registered |
830 |
pci 0000:01:00.0: Boot video device |
831 |
isapnp: Scanning for PnP cards... |
832 |
Switched to high resolution mode on CPU 0 |
833 |
isapnp: No Plug & Play device found |
834 |
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
835 |
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
836 |
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A |
837 |
brd: module loaded |
838 |
loop: module loaded |
839 |
input: Macintosh mouse button emulation as /devices/virtual/input/input0 |
840 |
Uniform Multi-Platform E-IDE driver |
841 |
pci 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 |
842 |
sis5513 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller |
843 |
sis5513 0000:00:02.5: IDE controller (0x1039:0x5513 rev 0x01) |
844 |
sis5513 0000:00:02.5: not 100% native mode: will probe irqs later |
845 |
ide0: BM-DMA at 0x4000-0x4007 |
846 |
ide1: BM-DMA at 0x4008-0x400f |
847 |
Probing IDE interface ide0... |
848 |
hda: LITE-ON COMBO SOHC-5236V, ATAPI CD/DVD-ROM drive |
849 |
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
850 |
hda: UDMA/33 mode selected |
851 |
Probing IDE interface ide1... |
852 |
hdc: WDC WD800BB-00JHC0, ATA DISK drive |
853 |
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 |
854 |
hdc: host side 80-wire cable detection failed, limiting max speed to |
855 |
UDMA33 |
856 |
hdc: UDMA/33 mode selected |
857 |
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 |
858 |
ide1 at 0x170-0x177,0x376 on irq 15 |
859 |
ide_generic: please use "probe_mask=0x3f" module parameter for probing |
860 |
all legacy ISA IDE ports |
861 |
ide-gd driver 1.18 |
862 |
hdc: max request size: 128KiB |
863 |
hdc: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 |
864 |
hdc: cache flushes supported |
865 |
hdc: hdc1 hdc3 hdc4 < hdc5 hdc6 > |
866 |
ide-cd driver 5.00 |
867 |
ide-cd: hda: ATAPI 52X DVD-ROM CD-R/RW drive, 1536kB Cache |
868 |
Uniform CD-ROM driver Revision: 3.20 |
869 |
Loading iSCSI transport class v2.0-870. |
870 |
iscsi: registered transport (tcp) |
871 |
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
872 |
serio: i8042 KBD port at 0x60,0x64 irq 1 |
873 |
serio: i8042 AUX port at 0x60,0x64 irq 12 |
874 |
mice: PS/2 mouse device common for all mice |
875 |
md: raid0 personality registered for level 0 |
876 |
md: raid1 personality registered for level 1 |
877 |
md: raid6 personality registered for level 6 |
878 |
md: raid5 personality registered for level 5 |
879 |
md: raid4 personality registered for level 4 |
880 |
cpuidle: using governor ladder |
881 |
TCP cubic registered |
882 |
NET: Registered protocol family 17 |
883 |
Using IPI No-Shortcut mode |
884 |
registered taskstats version 1 |
885 |
Freeing unused kernel memory: 428k freed |
886 |
input: AT Translated Set 2 keyboard |
887 |
as /devices/platform/i8042/serio0/input/input1 |
888 |
input: ImPS/2 Generic Wheel Mouse |
889 |
as /devices/platform/i8042/serio1/input/input2 |
890 |
NCR53c406a: no available ports found |
891 |
scsi: <fdomain> Detection failed (no card) |
892 |
GDT-HA: Storage RAID Controller Driver. Version: 3.05 |
893 |
qlogicfas: no cards were found, please specify I/O address and IRQ using |
894 |
iobase= and irq= optionsFailed initialization of WD-7000 SCSI card! |
895 |
NCR53c406a: no available ports found |
896 |
imm: Version 2.05 (for Linux 2.4.0) |
897 |
sym53c416.c: Version 1.0.0-ac |
898 |
Fusion MPT base driver 3.04.10 |
899 |
Copyright (c) 1999-2008 LSI Corporation |
900 |
Fusion MPT SPI Host driver 3.04.10 |
901 |
Fusion MPT FC Host driver 3.04.10 |
902 |
Fusion MPT SAS Host driver 3.04.10 |
903 |
3ware Storage Controller device driver for Linux v1.26.02.002. |
904 |
3ware 9000 Storage Controller device driver for Linux v2.26.02.012. |
905 |
Compaq SMART2 Driver (v 2.6.0) |
906 |
HP CISS Driver (v 3.6.20) |
907 |
Adaptec aacraid driver 1.1-5[2461]-ms |
908 |
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) |
909 |
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) |
910 |
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 |
911 |
QLogic Fibre Channel HBA Driver: 8.03.01-k4 |
912 |
Emulex LightPulse Fibre Channel SCSI driver 8.3.3 |
913 |
Copyright(c) 2004-2009 Emulex. All rights reserved. |
914 |
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded |
915 |
usbcore: registered new interface driver usbfs |
916 |
usbcore: registered new interface driver hub |
917 |
usbcore: registered new device driver usb |
918 |
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
919 |
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 |
920 |
ehci_hcd 0000:00:03.3: EHCI Host Controller |
921 |
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 |
922 |
ehci_hcd 0000:00:03.3: cache line size of 64 is not supported |
923 |
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000 |
924 |
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 |
925 |
usb usb1: configuration #1 chosen from 1 choice |
926 |
hub 1-0:1.0: USB hub found |
927 |
hub 1-0:1.0: 8 ports detected |
928 |
Initializing USB Mass Storage driver... |
929 |
usbcore: registered new interface driver usb-storage |
930 |
USB Mass Storage support registered. |
931 |
uhci_hcd: USB Universal Host Controller Interface driver |
932 |
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
933 |
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 |
934 |
ohci_hcd 0000:00:03.0: OHCI Host Controller |
935 |
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 |
936 |
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000 |
937 |
usb usb2: configuration #1 chosen from 1 choice |
938 |
hub 2-0:1.0: USB hub found |
939 |
hub 2-0:1.0: 3 ports detected |
940 |
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 |
941 |
ohci_hcd 0000:00:03.1: OHCI Host Controller |
942 |
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 |
943 |
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000 |
944 |
usb usb3: configuration #1 chosen from 1 choice |
945 |
hub 3-0:1.0: USB hub found |
946 |
hub 3-0:1.0: 3 ports detected |
947 |
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 |
948 |
ohci_hcd 0000:00:03.2: OHCI Host Controller |
949 |
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 |
950 |
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000 |
951 |
usb usb4: configuration #1 chosen from 1 choice |
952 |
hub 4-0:1.0: USB hub found |
953 |
hub 4-0:1.0: 2 ports detected |
954 |
usbcore: registered new interface driver hiddev |
955 |
usbcore: registered new interface driver usbhid |
956 |
usbhid: v2.6:USB HID core driver |
957 |
sl811: driver sl811-hcd, 19 May 2005 |
958 |
device-mapper: uevent: version 1.0.3 |
959 |
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: |
960 |
dm-devel@××××××.com |
961 |
md: raid10 personality registered for level 10 |
962 |
JFS: nTxBlock = 1733, nTxLock = 13867 |
963 |
RPC: Registered udp transport module. |
964 |
RPC: Registered tcp transport module. |
965 |
SGI XFS with ACLs, security attributes, realtime, large block/inode |
966 |
numbers, no debug enabled |
967 |
SGI XFS Quota Management subsystem |
968 |
fuse init (API version 7.12) |
969 |
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI |
970 |
Copyright (c) 1999-2006 Intel Corporation. |
971 |
kjournald starting. Commit interval 5 seconds |
972 |
EXT3-fs: mounted filesystem with writeback data mode. |
973 |
udev: starting version 146 |
974 |
IT8705 SuperIO detected. |
975 |
parport_pc 00:09: reported by Plug and Play ACPI |
976 |
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 |
977 |
[PCSPP,TRISTATE,COMPAT,ECP,DMA] |
978 |
FDC 0 is a post-1991 82077 |
979 |
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 |
980 |
ACPI: Power Button [PWRF] |
981 |
input: Power Button |
982 |
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 |
983 |
ACPI: Power Button [PWRB] |
984 |
input: Sleep Button |
985 |
as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 |
986 |
ACPI: Sleep Button [FUTS] |
987 |
Linux agpgart interface v0.103 |
988 |
thermal LNXTHERM:01: registered as thermal_zone0 |
989 |
ACPI: Thermal Zone [THRM] (40 C) |
990 |
fan PNP0C0B:00: registered as cooling_device0 |
991 |
ACPI: Fan [FAN] (on) |
992 |
agpgart-sis 0000:00:00.0: SiS chipset [1039/0741] |
993 |
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000 |
994 |
processor LNXCPU:00: registered as cooling_device1 |
995 |
pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
996 |
input: PC Speaker as /devices/platform/pcspkr/input/input6 |
997 |
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
998 |
ppdev: user-space parallel port driver |
999 |
Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 |
1000 |
sis900.c: v1.08.10 Apr. 2 2006 |
1001 |
rtc_cmos 00:04: RTC can wake from S4 |
1002 |
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 |
1003 |
rtc0: alarms up to one year, 242 bytes nvram |
1004 |
intel8x0_measure_ac97_clock: measured 59902 usecs (2881 samples) |
1005 |
intel8x0: clocking to 48000 |
1006 |
sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 |
1007 |
0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. |
1008 |
0000:00:04.0: Using transceiver found at address 1 as default |
1009 |
eth0: SiS 900 PCI Fast Ethernet at 0xe800, IRQ 19, 00:11:5b:84:60:3b |
1010 |
EXT3 FS on hdc6, internal journal |
1011 |
lp0: using parport0 (interrupt-driven). |
1012 |
Adding 248968k swap on /dev/hdc5. Priority:-1 extents:1 across:248968k |
1013 |
eth0: Media Link On 100mbps full-duplex |
1014 |
warning: `named' uses 32-bit capabilities (legacy support in use) |
1015 |
NET: Registered protocol family 10 |
1016 |
lo: Disabled Privacy Extensions |
1017 |
ip_tables: (C) 2000-2006 Netfilter Core Team |
1018 |
nf_conntrack version 0.5.0 (3583 buckets, 14332 max) |
1019 |
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use |
1020 |
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option |
1021 |
or |
1022 |
sysctl net.netfilter.nf_conntrack_acct=1 to enable it. |
1023 |
Installing knfsd (copyright (C) 1996 okir@×××××××××.de). |
1024 |
svc: failed to register lockdv1 RPC service (errno 97). |
1025 |
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery |
1026 |
directory |
1027 |
NFSD: starting 90-second grace period |
1028 |
eth0: no IPv6 routers present |
1029 |
usb 1-6: new high speed USB device using ehci_hcd and address 2 |
1030 |
usb 1-6: configuration #1 chosen from 1 choice |
1031 |
scsi2 : SCSI emulation for USB Mass Storage devices |
1032 |
usb-storage: device found at 2 |
1033 |
usb-storage: waiting for device to settle before scanning |
1034 |
IPKF INPUT Catch-all: IN=eth0 OUT= |
1035 |
MAC=ff:ff:ff:ff:ff:ff:00:1f:3a:15:c1:0d:08:00 SRC=192.168.1.104 |
1036 |
DST=192.168.1.255 LEN=242 TOS=0x00 PREC=0x00 TTL=128 ID=25546 PROTO=UDP |
1037 |
SPT=138 DPT=138 LEN=222 |
1038 |
usb-storage: device scan complete |
1039 |
scsi 2:0:0:0: Direct-Access WDC WD80 0JB-00JJC0 0811 PQ: 0 |
1040 |
ANSI: 0 |
1041 |
sd 2:0:0:0: Attached scsi generic sg0 type 0 |
1042 |
sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) |
1043 |
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled |
1044 |
sd 2:0:0:0: [sda] Assuming drive cache: write through |
1045 |
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled |
1046 |
sd 2:0:0:0: [sda] Assuming drive cache: write through |
1047 |
sda: sda1 |
1048 |
sd 2:0:0:0: [sda] Test WP failed, assume Write Enabled |
1049 |
sd 2:0:0:0: [sda] Assuming drive cache: write through |
1050 |
sd 2:0:0:0: [sda] Attached SCSI disk |
1051 |
IPKF INPUT Catch-all: IN=eth0 OUT= |
1052 |
MAC=ff:ff:ff:ff:ff:ff:00:24:1e:5b:3b:c7:08:00 SRC=0.0.0.0 |
1053 |
DST=255.255.255.255 LEN=328 TOS=0x00 PREC=0x00 TTL=64 ID=12332 PROTO=UDP |
1054 |
SPT=68 DPT=67 LEN=308 |
1055 |
IPKF INPUT Catch-all: IN=eth0 OUT= |
1056 |
MAC=01:00:5e:00:00:01:00:23:69:85:2f:40:08:00 SRC=192.168.1.1 |
1057 |
DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 |
1058 |
catherine ~ # |
1059 |
|
1060 |
|
1061 |
All I know is that at one time, the external drive was recognized |
1062 |
on /dev/sda and at that time I formatted the drive for swap space and |
1063 |
ran swapon /dev/sda1 Now for some reason it doesn't work. I want it to |
1064 |
work. |