| 1 |
On 10/3/05, Dave Oxley <dave@××××××××××××.uk> wrote: |
| 2 |
> Hi all, |
| 3 |
> |
| 4 |
> I have two Gentoo machines (specified as Server and Client for ease). |
| 5 |
> The server networking is working fine, but the client cannot receive |
| 6 |
> without lots of collisions. The speeds I get are: |
| 7 |
> Server -> Client (i.e. receive) 170.3Kb/sec |
| 8 |
> Client -> Server (i.e. transmit) 7.383Mb/sec |
| 9 |
> The cards of both machines are running half duplex. If I try to force |
| 10 |
> them to full duplex with (ethtool -s eth0 speed 100 duplex full autoneg |
| 11 |
> off) then all I get is errors in ifconfig. The module used for |
| 12 |
> networking on the client is 8139too. Can anybody help me with this? |
| 13 |
> |
| 14 |
|
| 15 |
I just recently had a problem like this. In my case the switch |
| 16 |
everything was plugged into got in some strange state and power |
| 17 |
cycling the switch fixed the problem. |
| 18 |
|
| 19 |
Hope this helps, |
| 20 |
Mark |
| 21 |
|
| 22 |
-- |
| 23 |
gentoo-user@g.o mailing list |
Archives