| 1 |
Am 05.10.20 um 17:19 schrieb Stefan G. Weichinger: |
| 2 |
|
| 3 |
> So my issue seems to be: non-working arcconf doesn't let me "enable" |
| 4 |
> that one drive. |
| 5 |
|
| 6 |
Some kind of progress. |
| 7 |
|
| 8 |
Searched for more and older releases of arcconf, found Version 1.2 that |
| 9 |
doesn't crash here. |
| 10 |
|
| 11 |
This lets me view the physical device(s), but the new disk is marked as |
| 12 |
"Failed". |
| 13 |
|
| 14 |
# ./arcconf GETCONFIG 1 PD | more |
| 15 |
Controllers found: 1 |
| 16 |
---------------------------------------------------------------------- |
| 17 |
Physical Device information |
| 18 |
---------------------------------------------------------------------- |
| 19 |
Device #0 |
| 20 |
Device is a Hard drive |
| 21 |
State : Failed |
| 22 |
Block Size : Unknown |
| 23 |
Supported : Yes |
| 24 |
Transfer Speed : Failed |
| 25 |
Reported Channel,Device(T:L) : 0,0(0:0) |
| 26 |
Reported Location : Connector 0, Device 0 |
| 27 |
Vendor : TOSHIBA |
| 28 |
Model : MG04SCA20EE |
| 29 |
Firmware : 0104 |
| 30 |
Serial number : 30A0A00UFX2B |
| 31 |
World-wide name : 5000039A08327484 |
| 32 |
Total Size : 0 MB |
| 33 |
Write Cache : Unknown |
| 34 |
FRU : None |
| 35 |
S.M.A.R.T. : No |
| 36 |
S.M.A.R.T. warnings : 0 |
| 37 |
SSD : No |
| 38 |
|
| 39 |
|
| 40 |
|
| 41 |
Tried a rescan and a clearing of status ... no change. |
| 42 |
|
| 43 |
Maybe the disk is too big for that controller. |
| 44 |
|
| 45 |
Creating a LD also fails: |
| 46 |
|
| 47 |
# ./arcconf CREATE 1 LOGICALDRIVE MAX volume 0,0 |
| 48 |
Controllers found: 1 |
| 49 |
A selected device is not available for use. |
| 50 |
|
| 51 |
Command aborted. |
| 52 |
|
| 53 |
juno /usr/portage/distfiles/linux_x64 # ./arcconf CREATE 1 LOGICALDRIVE |
| 54 |
MAX volume 0 0 |
| 55 |
Controllers found: 1 |
| 56 |
A selected device is not available for use. |
| 57 |
|
| 58 |
Command aborted. |
| 59 |
|
| 60 |
... annoying and frustrating |
Archives